Stroj na olepovanie hrán

HEBROCK F5 next

Stav: nový, Rok výroby: 2026, Max. hrúbka hrany: 3 mm Min/Max. hrúbka obrobku: 8 - 50 mm Min. dĺžka obrobku: cca 160 mm Pripravený na prevádzku: cca 3,5 min. Hmotnosť: cca 900 kg Max. príkon: Ø cca 7,4 kW Odsávací hrdlo: Ø 1 x 140 mm Elektrické napojenie: 400 V - 3 fázy - 50 Hz Výška pracovného stola: cca 900 mm Rýchlosť posuvu: cca 10 m/min. Rozmery stroja: cca 4 300 x 1 300 x 1 400 mm (D x Š x V) Hedpfx Ajhymgdja Uol Kombinovaná frézovacia hlava Rádiusová fréza R=2 mm Rádiusová hranová fréza R=2 mm Rádiusová strhávacia čepeľ R=2 mm Sprejovacie zariadenie hrany Pneumatické 3-bodové nastavenie (rádiusové, fazetové, zarovnávacie frézovanie)

Stav: veľmi dobrý (použitý), Rok výroby: 2022, Funkcionalita: plne funkčný, dĺžka posuvu os X: 4 200 mm, dĺžka posuvu osi Y: 1 600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravené pre jeden hlavný vreteno s lepiacou skupinou, namontovanou vpravo na portálovom priečniku. Hlavné 5-osové vreteno, 12 kW Vŕtacia hlava s 31 vretenami: 21 vertikálnych a 10 horizontálnych Ryhovacia píla sklopná o 90° Ofukovacia tryska pre borbo 60 mm Otočný zásobník na 32 nástrojov, HSKF63 Lineárny zásobník na 8 pozícií Otočný zásobník na 10 pozícií Hjdpfx Ajx Irzcea Uol Lepiaca skupina Power Edge Pro Duo Bezpečnostné ovládanie s nárazníkom Dopravný pás na triesky Vákuová pumpa Ovládací softvér PowerTouch, WoodWop

Stav: nový, Rok výroby: 2025, The Hebrock F 5 Hodpfei Anadox Aa Uel If you require maximum performance, the Hebrock F 5 is the solution for demanding edge banding in woodworking shops. The F 5 ensures complete edge processing at every stage, as it comes equipped with all components needed to meet your requirements: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing station. For even greater flexibility en route to a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min F5 Next edge banding machine With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; jointing cutter (including Dia tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drain, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and exchangeable cutter block (combination type), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift), buffing station, robust chain feed, ball-bearing double roller top pressure, rear view window, pull-out workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change system for corner rounding unit F5/08/5 additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 multi-radius scraper (R1/R2) F5/24/1 spraying unit for separating agent F5/24/2 spraying unit for cleaning agent F5/25. spraying unit for edge F5/27. nesting for milling and radius scraper F5/30. pneumatic 3-point adjustment (radius, bevel, flush milling) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024

Stav: nový, Rok výroby: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving. It also features the equipment you need to process perfect edges from the very beginning: diamond-tipped jointing cutters ensure excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, a trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and application of hot-melt adhesive to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change basin setup including glue discharge device, high-frequency trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination design), robust chain feed, ball-bearing double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Hsdpfslht Hzjx Aa Usl

Stav: veľmi dobrý (použitý), Rok výroby: 2019, Funkcionalita: plne funkčný, prevádzkové hodiny: 5 383 h, HOMAG DRILLTEQ V-200 je kompaktné a mimoriadne efektívne CNC vertikálne obrábacie centrum navrhnuté na presné vŕtanie, drážkovanie a frézovanie pri výrobe nábytku a skriniek. Vďaka vertikálnemu spracovaniu stroj zaberá minimálnu plochu pri vysokej flexibilite a produktivite. Je ideálny na kusovú aj sériovú výrobu. Hodpfxeym Ny So Aa Uol Stroj je vo veľmi dobrom technickom stave a je možné si ho pozrieť v chode.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, výkon: 7 kW (9,52 k), priemer pílového kotúča: 305 mm, celková dĺžka: 3 100 mm, celková šírka: 3 100 mm, celková hmotnosť: 3 000 kg, dĺžka rezu (max.): 3 100 mm, výška rezu s predrezom (max.): 70 mm, posuv osi X: 40 m/min, posuvová rýchlosť osi Z: 50 m/min, požiadavok na dĺžku priestoru: 3 100 mm, požadovaná šírka: 3 100 mm, Výbava: dávkovač, otáčky plynule nastaviteľné, SCHEER PA 4136 Panel Dividing Saw – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel dividing saw for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial use in joineries, furniture manufacturing, and panel processing. Hsdpfx Aowrn Efsa Uel Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit < 2 mg/m³) Main Technical Data & Features: - Longitudinal saw FM 20-3100 with hardened guides - Automatic forward & return movement of saw unit (return lowered automatically) - Feed drive via three-phase gear motor, frequency-controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from outside (without opening the hood) - Safety hood locking with slat curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 notches in the pressure beam for remnant cuts down to 5 mm - Saw motor: 7.0 kW | Scorer motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Right-angle press device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 top-mounted guides, rack-and-pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety-limited) - Return: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the right-angle fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial port - Network-capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard in swiveling control panel - Graphical display of cutting plans and processes Software / Programs: - OPTIMAX: Office-based optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, floppy disk, or online (optional) - Manual, automatic & special modes (e.g. grooving, veneered parts) Additional Equipment: - Right-angle fence table HP 5085: 1,720 x 800 mm | Pertinax top - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax top - Air cushion unit LK 5030 integrated into both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is used worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity in Southeast Asia (e.g., Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and impresses with its outstanding stability and durability. Warranty: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine design and guide rails. (Excludes electrical supply parts and wear parts.) 📞 Contact us for a tailored offer or to schedule a viewing appointment. Machine available ex-stock. Delivery, commissioning, and training optionally available.

Stav: nový, Rok výroby: 2023, Funkcionalita: plne funkčný, výkon: 5,5 kW (7,48 k), rezacia výška (max.): 204 mm, typ nastavenia výšky: elektrický, výška stola: 910 mm, šírka rezu pri paralelnom pravítku: 1 300 mm, hlavný priemer pílového kotúča: 550 mm, dĺžka pojazdu: 3 200 mm, Výbava: motorová brzda, otáčky plynule nastaviteľné, Altendorf F45 EvoDrive Year of manufacture: 2023, new machine - Program holder at terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - 5.5 kW (7.5 HP) VARIO motor (stepless speed control) - Prepared for 2-axis scoring unit Hjdpfsvw S Hfsx Aa Usl - Table extension 840 mm - Double roller carriage length 3200 mm - Mitre crosscut fence - CNC rip fence 1300 mm - Front support roller

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, celková výška: 1 020 mm, stavebná výška: 410 mm, zdvíhacia výška: 600 mm, pohotovostná hmotnosť: 150 kg, nosnosť: 350 kg, celková dĺžka: 1 900 mm, celková šírka: 740 mm, dĺžka záruky: 24 mesiace, NIVEAU – Scissor Lift Table HS 350 Large without Worktop Description: • Mobile double horizontal scissor lift table, basic version without worktop Hsdeh A Hxiepfx Aa Usl • With base frame for mounting various worktops • 4 swivel castors, 2 with brake • Wheel diameter: 125 mm • Operated by foot pump Load capacity (kg): 350 Weight (kg): 150 Usable lift (mm): 610 Lowered height (mm): 400 Max. height (mm): 1010 Platform size (mm): 1900 x 740

Stav: dobrý (použitý), Rok výroby: 2016, Funkcionalita: plne funkčný, Použitý olepovačka hrán SCM - Model: Olimpic K360 T-ER1 Hedpfx Aeyrr Naoa Uol - Vo veľmi dobrom stave. - Ihneď k dispozícii - Video na požiadanie - Rok výroby 2016 - Špičková výbava (2 extra lepiace zásobníky)

Stav: nový, SCM Olimpic 500 HT – Automatická olepovačka hran Nový stroj se zárukou. - Olimpic 500 – provedení "HP T-ER2" - Ovládací konzole "eye-S" (řídicí panel) Hedpfewkf Ihex Aa Ujl - Uživatelské rozhraní HMI software "Maestro active edge" - Jemné frézovací a radiusové stahovací jednotky, rádius = 1 mm - Jemné frézovací a radiusové stahovací jednotky, rádius = 2 mm - Elektronické nastavování horního přítlačného nosníku - Omezovač rozestupu na vstupním pravítku - Sada "SAVENERGY" - Vnitřní osvětlení kabiny a oblasti olepování - "Nesting" dotykové válečky - Dělící sprejová jednotka "AAR" 1 - Stříkací zařízení pro dokončování hran - Stříkací zařízení pro citlivé hrany - Zarovnávací jednotka "RT-V1" - Zařízení "EASY SIZE" - Lepicí jednotka "VC-VM" - Keramická lampa s infračervenými paprsky - Elektronické nastavování přítlačných válečků - Ořezávací jednotka "K-2 Radius" - Sražení hrany a radius frézovací jednotka "R-HP Multiedge 2R" - Zaoblovací jednotka "Round 2-A Multiedge 1R" - Sada MULTIEDGE 3 automatické pozice rovně/R/R, pro "Round 2-A" - Radiusová stahovací jednotka "RAS-HP Multiedge 2R" - Plošná stahovací jednotka "RC-N" - Lešticí jednotka "SP-V" Stroj je nový, stále v originálním balení. Speciální akční cena.