Bezhrotová brúska

HERMINGHAUSEN SR4

Stav: použitý, Rok výroby: 1970, Technické údaje: Max. priemer brúsenia: 400 mm Max. šírka brúsneho kotúča: 180 mm Brúsiaci rozsah: 2-100 mm Celkový požadovaný výkon: 24 kW Hmotnosť stroja cca: 3,2 t Cjdpfx Alsypm Ifsyorb Z výroby ventilov

Stav: použitý, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swivel range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Min. indexing increment: 2.5 [degrees] - Internal grinding: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLE - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Min. C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill stroke: 35 [mm] Credpeylc R Ujfx Alyeb ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 20 [kVA] WEIGHT AND DIMENSIONS - Required space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] EQUIPMENT - Control: FANUC Oi-TD - Electronic handwheel - 3-color status lamp - Oil mist extraction unit - Direct position feedback system axes: X / Z - Dynamic balancing for grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Fixed dressing device - Workpiece probe system - Coolant tank: 375 [l] * with paper filter

Stav: použitý, Rok výroby: 2008, Funkcionalita: plne funkčný, číslo stroja/vozidla: 5028, šírka brúsneho kotúča: 250 mm, priemer brúsneho kotúča: 500 mm, brúsený priemer: 125 mm, priemer obrobku (max.): 125 mm, Completely overhauled Herminghausen SR4 – overhaul was carried out in 2008 by SFS Werkzeugmaschinen GmbH, 63165 Mühlheim am Main. Codpfjv H A Edsx Alyorb The machine can be used for plunge grinding or through-feed grinding. From October 2008 to 2017, the machine was in operation at Daimler-Benz, Gaggenau. It was regularly serviced and is in good condition. We subsequently acquired the machine, but unfortunately it was never put into operation due to lack of use. The machine has always been stored dry and properly. Accessories: Workpiece support holder for through-feed operation, pinion key.

Stav: pripravené na použitie (použité), Rok výroby: 2006, Funkcionalita: plne funkčný, Pozície rotačných nástrojov sú: T01-02-03-04 / T22-23 / T34-35 – vybavené podávačom tyčí Iemca Boss 332E/32 (nový v roku 2006) – množstvo upínacích púzdier / vodiacich púzdier – riadenie MSC-501 – stroj vždy pracoval s olejom. Credpfewpu Etex Alyob

Stav: veľmi dobrý (použitý), Perfektne zachovalý šesťvretenový automatický sústruh INDEX MS 25 so šiestimi priečnymi a šiestimi pozdĺžnymi vedenými nástrojmi. Cena je dohodou v závislosti od zvoleného voliteľného príslušenstva: upínacie púzdra, nástroje, dopravník triesok a pod. Credpoqhkukefx Alyjb Stroj je stále v prevádzke. Obhliadka je možná po dohode.

Stav: dobrý (použitý), Rok výroby: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirement: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Feed rate: 0 – 99.99 m/min --> Incremental infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / R --> Grinding stroke speed: 0 – 5 m/min / R --> Feed rate: 0 – 99.99 m/min / R --> Incremental infeed value during reversal: 0 – 0.999 mm / Ø Crsdpfow Intaox Alyob --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> Stroke U-axis (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Stav: použitý, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: Crodpouxft Ejfx Alyjb - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: použitý, Rok výroby: 1994, Technické detaily: Počet vretien: 8 Priemer priechodu vretien: 32 mm Položka: vačkový viacvretenový automatický sústruh Značka: Schütte Typ: AF32 S DNT Rok výroby: 1994 Osemvretenový automatický sústruh s 8 hlavnými vretenami max. menovitý priechod D=32mm Riadenie: Siemens SIMATIC S7 elektronický vačkový spínač Balluff Upínač v pozícii 8 na zadné opracovanie CNC priečny suport pozícia 6 CNC priečny suport pozícia 7 Dopravník obrobkov KSS-chladenie Schimpke Dopravník triesok s magnetickým separátorom Spojky na rezanie závitov Zobrazené príslušenstvo k strojom sa môže líšiť od dodávaného rozsahu! Cjdel Su Rxspfx Alyerb Pre viac informácií a fotografie nás prosím kontaktujte prostredníctvom mailu (at) alebo

Stav: použitý, TECHNICKÉ ÚDAJE - Počet vreten: 2 - Počet osí: 2 HLAVNÉ VRETENO - Otáčky vretena: 6500 [ot/min] - Max. priemer tyče: 42 [mm] - Max. obrábateľný priemer: 120 [mm] - Minimálne rozlíšenie osi C: 0,1 [stupňa] PROTIVRETENO - Otáčky vretena: 6500 [ot/min] - Max. priemer tyče: 42 [mm] - Minimálne rozlíšenie osi C: 0,1 [stupňa] ELEKTRICKÉ NAPÁJANIE - Napájacie napätie: 230 [V] - Celkový výkon: 7,5 [kW] HMOTNOSŤ A ROZMERY - Potrebný priestor: 5 400 x 1 900 [mm] - Výška stroja: 2 000 [mm] Cjdeu E U Ufopfx Alyerb - Hmotnosť stroja: 5 000 [kg] HODINY STROJA - Hodiny pod prúdom: 33 912 [h] - Prevádzkové hodiny: 21 069 [h] PRÍSLUŠENSTVO - Riadenie: FANUC 160i - Nádrž na chladiacu kvapalinu - Dopravník triesok - Odoberanie dielov - Pásový podávač dielov

Stav: použitý, Rok výroby: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m D I S K U S Vertical double-sided surface grinding machine in C-frame design and with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 Serial no.: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x grinding width approx.: 60 x 120 mm Vertical adjustment of quills, each approx.: 150 mm Hydraulic infeed pulses for depth feed: 0.0025 – 0.05 mm Outer diameter of the transport disc approx.: 810 mm Rotary table feed, continuously variable: 14 – 145 mm/s Grinding wheel speed each approx.: (24 m/s) / 765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Total weight approx.: 7,000 kg Accessories / Special Equipment • Workpiece rotary device for round workpiece transport discs with corresponding slots for loading parts and with automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring the ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Continuous speed control of the rotary device according to grinding dimension and workpiece. • Manual grinding wheel infeed via corresponding buttons • Hydraulically swiveling dressing unit (RA) between the two grinding wheels for simultaneous dressing of both grinding wheels with corresponding compensation and automatic repositioning to the effective workpiece thickness after dressing = high time savings, can be manually triggered as well as via a timer. • Ampere meters for both grinding spindle drives * Central lubrication • Mechanical height control of the workpieces with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series. For example: washers, piston rings, hydraulic parts, clock parts, stamped parts, etc. Condition: good – will be ready for demonstration soon Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Credpfxot Hw N He Alysb