Merací systém

Hexagon Primescan

Rok výroby: 1965, stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2549, General / Technical Data: Kodstuuvzepfx Altjnc Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broaching stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Acceptance in the pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Workpiece diameter: max. approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Oil capacity: Hydraulic approx. 450 L / Coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (without work area) Power supply: 380 Volt 50 Hz Connected load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine includes an integrated coolant and cutting fluid system • The machine is equipped with a manually operated tool feeder • The broaching slide with draw head mount is guided flat on both sides • The machine is fitted with adjustable pull force limitation • Pull force display Accessories: • 1 universal draw head for flat shanks up to max. approx. 40 mm width • Indexing device (see pictures) • Various special arbors and clamping devices • Machine documentation Remarks: The machine is designed for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and the robust broaching tool feeder, it is very well suited for heavy-duty profile broaching tools. The machine is used and in condition appropriate to its age. The machine is available for inspection at our warehouse. It is newly added to our stock and has not yet been refurbished technically or visually. Draw heads for profile broaching are available upon request, depending on DIN standard, dimension, and stock availability.

Stav: použitý, Rok výroby: 2008, Technické údaje: Priemer obrobku - max.: 29 mm Knjdpfx Ajlqac Seltjc Priemer obrobku - min.: 26 mm Dĺžka obrobku: 66 mm Zariadenie bolo pôvodne dodané pre nasledujúce rozmery obrobkov: priemer 26 mm - 29 mm, dĺžka 65 mm - 66 mm. Vďaka výmenným dielom v upínacom zariadení, manipulácii atď. by boli pravdepodobne možné priemery až do cca Ø50 mm. Celková dĺžka by mohla byť s niekoľkými úpravami až takmer 400 mm. Je to však opäť závislé od dĺžok nástrojov, obrábacích dĺžok na súčiastke atď.

Rok výroby: 2021, stav: takmer ako nový (použitý), Mobilný 3D súradnicový merací prístroj Keyence WM-3000 Zariadenie v stave nového, predáva sa z dôvodu kúpy nového zariadenia Technické údaje sú dostupné u výrobcu Obhliadka možná v 47877 Willich Kodpfx Ajmrrb Sjltsnc

Stav: použitý, číslo stroja/vozidla: 109369/109370, Technické údaje Výrobca: ZEISS Knedpfx Aodbi Nlsltjc Sériové číslo: 109369/109370 Doska je v strede delená Meracia doska Dĺžka = 6000 mm Šírka = 3000 mm Výška = 350 mm Stroj je možné podľa požiadaviek zákazníka modernizovať novým softvérom. Cena: na vyžiadanie! Montáž a uvedenie do prevádzky sú možné! Radi Vám vypracujeme podrobnú ponuku! Upozornenie: Naša ponuka je určená výhradne pre odborných zákazníkov! (Zmeny a chyby v technických údajoch, informáciách a cenách, ako aj predaj v medzičase sú vyhradené!)

Stav: nový, TECHNICAL SPECIFICATIONS: It is possible to use stainless materials such as V2A 304ss or V4A 316ss, depending on the preferred surface treatment. The side walls of the tank are insulated with 50 mm glass wool. Tanks that require heating can be equipped with either a coil heater or an electric heater. Temperature control is digital, with accompanying monitoring. If required, an air mixing device can be added to the tanks. Stainless steel ball valves are used for drainage. Knedpfjfw N Rtsx Altec OPERATING PRINCIPLE: The process is based on surface cleaning and treatment. The material to be cleaned is placed in baskets, which are then immersed using a crane in tanks filled with chemicals and/or water, where it remains for a specified period. The goal is to remove existing oil layers from the metal surface and to create a thin protective film, making the material more suitable for painting and more resistant to external factors. FIELDS OF APPLICATION AND ADVANTAGES: The automotive sector, white goods sector, lighting sector, and general mechanical engineering are ideal for this system, especially in cases where continuous production is not required, a consistent and high quality is desired with reduced manpower, or alternative solutions are not available due to material shape or size, or where very high capacities are not necessary. Chemical and temperature parameters can be monitored and regulated through optional automation. APPLICATION: Immersion-type surface cleaning applications vary according to the preferences and required specifications of each sector. As demonstrated by these two main applications: - Iron phosphate surface treatment - Zinc phosphate surface treatment In addition, cleaning and degreasing applications only are also possible. Optional accessories for the immersion tank: * Drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the operating principle of drying ovens, used as the final step in immersion-type surface cleaning equipment, is similar to that of box ovens. However, to be suitable for immersion-type surface cleaning lines, the oven lid components are arranged at the top, and the cleaned parts are dried in the same basket. This drying system allows the cleaned parts to enter the drying oven and, after drying, to be ready for painting.

Stav: použitý, Rok výroby: 1996, Workpiece diameter: 240 mm Centre distance: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Kedpfx Aot Hwvmjltjnc Required space approx.: m R E I S H A U E R (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year of manufacture: 1996 # 74 105 _____ Gear diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece carriage stroke (Z-axis): 275 mm Honing tool traverse stroke (X-axis): 128 mm X-axis feed per stroke: 0.001 mm Crowning approx.: 0.5° Workpiece clamping length approx.: 500 mm Workpiece oscillation max. approx.: 3,000 mm Honing tool diameter outside/inside x width: 325/308 x 45 mm Honing tool spindle speed: 100 – 1,200 rpm Dresser speed of honing tool: 30 – 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW – 400V – 50Hz Total weight: approx. 5,000 kg Accessories / Special Equipment SIEMENS CNC path control system Type 810 G allows input of all relevant gear data and setup of the workpiece via interactive dialog with the control system. With DNC interface RS 232 for data input and output. A-axis = Swivel / Z-axis = Table movement / X-axis = Honing tool feed, S-axis = Honing wheel speed, U-axis = Crowning adjustment. Fitted with automatic device for inserting the honing wheel into the gear gap. The tool swivel angle (A-axis) is also electronically operated, fast and precise, and hydraulically clamped, which means faster set-up times. Hydraulic workpiece clamping via foot switch between spindle headstock and tailstock; both units are traversable on the workpiece table depending on the workpiece. Full work area enclosure with sliding doors and safety interlock. High-quality original REISHAUER honing oil preparation system Type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on arbors - Separate control and electrical cabinet, ventilated and cooled, separate hydraulic unit.

Rok výroby: 1972, stav: použitý, This machine is available three times. Specifications: Manufacturer: Landis Model: FRM 50 E-8 Year of manufacture: 1972 Quill stroke: approx. 100 mm Distance between spindles (retracted): approx. 550 mm Knsdpfx Aleg Umitotoc Maximum workpiece diameter: 75 mm Travel per unit: 200 mm Drive power: 8.5 kW / 750 rpm 12 kW / 1450 rpm 18 kW / 2960 rpm Note: The machine is set up for ø20 mm and 65 mm length Accessories: with magazine

Stav: použitý, Rok výroby: 2016, prevádzkové hodiny: 60 000 h, Funkcionalita: plne funkčný, Heller FMS s 2 x H2000 Výrobca/typ stroja: HELLER H2000 Prevádzkové hodiny: 59 654 Rok výroby: 2016 Riadiaci systém: Siemens 840D SL Vreteno: PC63, 10 000 ot./min., 38 kW, 242 Nm Systém upevnenia nástrojov: SK40 Magazín/počet pozícií: Reťazový magazín/160 pozícií Pohodlné ovládacie terminály, paralelné prestavovanie počas hlavného času Otočný stôl: 360 000° X 0,001° Chladiace zariadenie: Knoll KF 400/50 bar Pracovná oblasť XYZ (mm): 630 / 630 / 630 Veľkosť palety (mm): 500 x 400 Upevnenie obrobku: Mechanické Ďalšie možnosti, zvláštnosti: Kontrola poškodenia vrtákov (SBBK); rozhranie FMS, infračervený prijímač a meracie hmatadlo (Renishaw), rozhranie pre odsávanie; chladič chladiacej kvapaliny Výrobca/typ stroja: HELLER H2000 Prevádzkové hodiny: 60 546 Rok výroby: 2016 Riadiaci systém: Siemens 840D SL Vreteno: SC63, 16 000 ot./min., 40 kW, 96 Nm Systém upevnenia nástrojov: SK40 Magazín/počet pozícií: Reťazový magazín/240 pozícií Pohodlné ovládacie terminály, paralelné prestavovanie počas hlavného času Otočný stôl: 360 000° X 0,001° Chladiace zariadenie: Knoll KF 400/50 bar Pracovná oblasť XYZ (mm): 630 / 630 / 630 Veľkosť palety (mm): 500 x 400 Upevnenie obrobku: Mechanické Ďalšie možnosti, zvláštnosti: Kontrola poškodenia vrtákov (SBBK); rozhranie FMS, infračervený prijímač a meracie hmatadlo (Renishaw), rozhranie pre odsávanie; chladič chladiacej kvapaliny Výrobca/typ stroja: FASTEMS FPC750 s rozširujúcou sa jednotkou Prevádzkové hodiny: Bez nainštalovaného počítadla Rok výroby: 2016 Riadiaci systém: FASTEMS Pamäťové pozície: 24 pamäťových pozícií, 2 prestavovacie pozície Upevnenie obrobku: Mechanické Ďalšie možnosti, zvláštnosti: 20 paliet v cene Ďalšie informácie a technické údaje poskytneme na vyžiadanie. Kodpfx Aowbt Rroltjnc

Rok výroby: 2010, stav: veľmi dobrý (použitý), číslo stroja/vozidla: MBHF-4BR125, DEMAG KBK žeriavové pole / dráha, rozmery cca 33 x 6,5 m + 4 žeriavy Nosnosť / zdvíhacia kapacita: 4x 125 kg - 0,125 t Žeriav je možné v dĺžke rozdeliť na polovicu Technické údaje zariadenia: Žeriavová dráha z profilov Demag KBK2/KBK2T Zariadenie sa dodáva kompletne: KBK profily, spojky profilov, pojazdy, koncové platne, energetický reťazový vodič, prívod elektriky, úchyty/závesy atď. Vrátane 4 mostov s reťazovými zdvihákmi 125 kg 3x Demag DC-COM + 1x Stahl Žeriav je demontovaný a okamžite k dispozícii Veľmi dobrý použitý stav, viď fotografie Poloha tovaru: 75053 Gondelsheim Doprava kuriérom alebo osobný odber len po dohode Skladové zásoby Demag KBK1, KBK2 a KBK3 profilov! Na sklade aj ďalšie KBK zariadenia. Nosnosť 125 kg – 1600 kg Prosíme, pre dopyt o žeriavovú dráhu uveďte požiadavky na nosnosť a rozmery. Kjdpfxjm Tvvij Altonc

Stav: nový, Rok výroby: 2025, Are you looking for a genuine nameplate laser machine and not a toy? Then you are exactly right here: (* Price depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Laser Marker skyLaser Mark - 20W 2D software, 3D fiber laser engraving/marking laser optional - the complete solution for your complex laser processing needs. Nameplate Laser Machine Attention: Compare the installed components used in the offered laser systems: Scanlab (R) scanner, IPG Photonics (R) laser, Parker (R) axes, Schneider Electric (R) motors, Scanlab (R) controller, German software, cables – all components made exclusively in Germany! The laser systems are manufactured 100% at our plant in Plauen according to customer requirements! Competition often uses Chinese components here (it starts with the controller: EZCAD = Chinese origin!) (* The stated price may vary depending on configuration; images show various equipment options; you receive a brand-new laser machine manufactured by us) Ideal solution for: - Product identification - Laser marking - Laser engraving - Laser cleaning - Laser ablation Our skyLaser Mark nameplate laser systems are used precisely where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the most intricate structures can be produced on almost any material. Advantages for your application include geometric flexibility and high processing accuracy. Regardless of the hardness of the workpiece, this type of processing can be applied. With a mobile and customizable work table to suit your needs, system flexibility is further increased. The system can be easily integrated into your production line or operated as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings) and is specifically suitable for the nameplate laser machine’s areas of application in metal and selected organic materials. A wide variety of fonts, barcodes, serial numbers, logos, and images can be applied effortlessly. Thanks to the excellent resolution, virtually all marking requirements can be fulfilled, including manufacture of embossing stamps, engravings, inscriptions, and complex, fine structures. The software is extremely user-friendly. Even very complex and demanding marking tasks can be easily created on the included industrial PC. Accurate positioning is a breeze, thanks to the optional observation camera for process monitoring and software-assisted workpiece alignment. Because the system has hardly any wear parts and is almost maintenance-free thanks to the IPG laser technology, it is particularly suitable for industrial applications and continuous operation. Kedpfx Asdgfgcoltsnc The skylaser marking/engraving laser at a glance: Processing area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (depending on F-Theta lenses / 3D option) Laser source: IPG (pulsed fiber laser, ytterbium pulsed fiber laser) SCANLAB galvanometer scanner Nominal laser power: 20W