Hydraulický lis

Hidrobrasil 4 Säulenpresse 250T

Pressure: 250 t
Clear passage width: 2500 mm
Stroke: 500 mm
Total power requirement: 60 kW
Approximate machine weight: 39 t
Dimensions L x W x H: 2720 x 3750 x 4350 mm
Retraction force: 25 t
Maximum working height: 800 mm
Table size: 3090 x 1500 mm
Ram size: 3090 x 1500 mm
Table height above floor (approx.): 1000 mm
Advance speed: 400 mm/sec
Pressing phase speed: at 125 t, 50 mm/sec
Return speed: 400 mm/sec
Rapid traverse speed: 400 mm/sec
Oil tank: 1500 l
Oil cooling (electric): 3 kW (max)
Vibration damping plates: each 450x450x85 mm
Pressure: 250 t at 220 bar
Max. pump capacity: 176 l/min
Recommended oil: 46 grade / 10 my
Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac
SIEMENS control system: included
Light curtains from Schmersal/Pilz: Pilz
Monitor: Omron 12"

Vibration damping plates:

The machine is mounted on 4 specially made damping plates, each measuring 450x450x85 mm.

Oil tank with oil cooling:

The tank has a capacity of 1500 liters. The oil is cooled by a dedicated pump, which engages at 40 degrees Celsius.

Oil filtration system:

In addition to the main and cooling pumps, the press features an independent filtration circuit. This pump operates continuously but only requires 1.5 kW.

Energy-saving function:

If the main pump is not needed for a preset period, it switches to energy-saving mode, requiring only about 2 kW/h. It returns to full performance immediately when pressure is required.

Safety technology:

Safety technology is supplied by Pilz. The light curtains are also from Pilz.
Podjd Nq Idjpfx Afkogg

Control cabinet:

40% of the space in the control cabinet remains free for future installations. All cabinet components are from Schneider.

Bolts:

All bolts used on the machine are zinc-plated or yellow-galvanized.

Oil tray:

The hydraulic block and pump are positioned in a small oil tray to collect oil during repairs or hose replacements.

Noise emission:

The press produces a maximum of 75 decibels according to standards.

Accessories:

Roller loading bridges:

2 removable loading bridges with rollers, each 1500 mm long, with supports fitted with large, robust heavy-duty rollers.

Parallelism monitoring:

Both cylinders are monitored using Balluff displacement measurement systems and Sick wire-draw encoders. Parallelism monitoring activates with the start of the pressing process, with adjustable accuracy in the control system. The function is deactivated during idle runs. The position on the left and right sides of the ram is measured using two SICK wire-draw encoders. The control system then opens or closes the oil flow to the cylinders via special fast-response valves. Required parallelism accuracy will be under 1 mm across the entire width.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.