Stacionárny odsávací systém

Holzing RLA ATEX 5500 m3/h (5,5 kW)

Stav: veľmi dobrý (použitý), Štvorstranná hobľovačka Weinig max. šírka hobľovania: 230 mm max. výška hobľovania: 120 mm 5 hláv: spodná - 5,5 kW; ľavá a pravá - 11 kW; horná - 11 kW; spodná - 5,5 kW posuv - 4 kW hlavy plne nastaviteľné Elektrické nastavenie výšky a šírky hobľovania vretená 40 mm posuv na kardanových hriadeľoch, s plynulou reguláciou Robustná hobľovačka značky WEINIG Dĺžka stroja: 415 cm Djdpfjrigxyjx Am Tscl Stroj otestovaný v originálnom stave

Stav: ako nová (výstavný stroj), Rok výroby: 2025, CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision components and high own weight Standard with forward/reverse rotation and electronic interlock for direction change 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminium fence jaws included as standard Powerful industrial motors Equipment details: - Milling fence - Milling fence with handwheel adjustment accessible from the front - With digital readout - Interchangeable spindle - MK 4 interchangeable spindle system standard on all CASADEI F 23 and F 25 models - Optional sliding table - Optional sliding table for small tenoning work and slotting Scope of delivery: - Manually tiltable spindle from +45° to -45° - Speed display via LED on front - Aluminium fence jaws - Curved milling guard - Forward/reverse spindle rotation - MK 4 interchangeable spindle - Milling fence with handwheel adjustment accessible from the front with digital readout - Table extensions left and right (2500 mm length) - Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length at Ø 30-35 mm: 140 mm Usable spindle length at Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Dedpfx Ajdqzcxem Tjcl Max. cutter diameter for profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaping cutter Ø: 160 mm Max. retractable tool Ø: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø, fence: 1 x 120 mm Extraction port Ø, under the table: 2 x 80 mm Location: In stock 54634 Bitburg - Immediately available -

Stav: nový, Rok výroby: 2026, Odsávacia a uhlová píla Typ: ZS 200 N – 5 kW motor s rámom stroja, ale bez pílového kotúča Dodpfx Amji Dfido Tocl Nastaviteľná prostredníctvom ručného kolesa a závitovkového prevodu (vzadu) akceptuje náklon Priemer pílového kotúča: 520 mm, priemer upínacieho otvoru: 50 mm Otáčky pílového kotúča: 2800 ot/min 400 voltov / 5 kW (S6/40%) motor s brzdou a automatickým zapojením hviezda-trojuholník Šírka rezu pri 90°: 420 mm Šírka rezu pri 45° (naklonené): 295 mm Výška rezu pri 90°: 200 mm Výška rezu pri 45° (naklonené): 140 mm Píla sa dá na jednej strane otočiť do ostrého uhla až cca 25° a nakloniť doľava až 30° Hmotnosť stroja: cca 250 kg Lokalita: sklad 54634 Bitburg – ihneď k dispozícii –

Stav: veľmi dobrý (použitý), Rok výroby: 2022,

Stav: nový, Rok výroby: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was developed with precisely this objective in mind. It allows you to straighten workpieces at a modern standard and reliably chamfer them at precise angles. As standard, the machine comes equipped with a TERSA solid steel cutterblock. The Xplane cutterblock, which features a shearing cut, is available as an optional extra. Chamfering is effortless, thanks to the user-friendly single-lever adjustment, which enables any angle between 90° and 45° to be set quickly. The robust cast-iron tables of the T54 provide a secure support surface, even for large and heavy workpieces. If you need additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also in solid cast-iron construction. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary guide for small workpieces Dedpfxspgkmwo Am Tocl Motorized table adjustment Equipment: T54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: In stock 54634 Bitburg - available immediately -

Stav: nový, Rok výroby: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds: 3500 to 10,000 rpm Milling spindle with forward/reverse rotation Large dimension cast iron milling unit, mounted directly to the table With extraction hood under the working table for improved dust extraction Solid and precise cast iron table Fast and easy speed change High-performance 5.0 kW motor Standard supplied arc milling protection hood Quality Made in Italy Equipment Details Cast iron milling unit Mounted directly to the milling table Milling spindle supported high up with precision ball bearings, ensuring minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful Motor Equipped with a powerful three-phase motor Milling protection The standard milling guard is equipped as standard with a height-adjustable guide rail and protective guard for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw The integrated extraction connection ensures a clear view Milling table opening A large table opening also allows for the use of larger raised panel cutters, tenoning, and slotting tools above and below the table Dcodshp Rcrepfx Am Tsl Arc milling protection hood Included as standard in the delivery Reversible fence jaws Versatile, integratable fence for bridging the tool gap Allows safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weights Net weight (approx.): 240 kg Dust extraction connection Extraction port diameter: 2 x 120 mm Work table Work table length: 1945 mm Table height: 900 mm Work table width: 695 mm Installation information Required space length: 1945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1600 mm Space requirement note: Dimensions consider maximum traverse paths or usable lengths. Working area width/depth: 1600 mm Machine body length: 1000 mm Working area note: Add the given dimensions to the required space to calculate the recommended clear installation area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Maximum spindle projection above table: 130 mm Spindle journal diameter: 30 mm Maximum cutter diameter Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Arc milling protection hood Aluminium fence jaws Table extension left and right Pull-out workpiece support

Stav: ako nová (výstavný stroj), Rok výroby: 2025, minimax ti 55es LL – Stolová fréza Obrázok zobrazuje štandardné vyhotovenie modelu T 55 i elite s. Profesionálny stroj pre remeselníkov s výkyvnou frézovacou vretenou a 4 rýchlosťami. M Digital: motoricky nastaviteľná výška a sklon. Robustná konštrukcia zo sivej liatiny a ocele. Veľkorozmerná frézovacia jednotka z liatiny, výkyvná dozadu až do -45°. Zobrazenie rýchlosti frézy cez LED indikáciu. Rýchla, jednoduchá zmena rýchlosti pomocou excentrického upínania. Chod vpravo/vľavo. Zobrazenie výšky a náklonu s presnosťou na 1/10 mm. Profesionálny frézovací doraz: s jemným nastavením cez ozubenú tyč, s digitálnym zobrazením, hliníkové dorazové čeľuste, 3 polohy pre rýchle opakovanie nastavenia. Obsah dodávky: - Hliníkové dorazové čeľuste - Ochranný kryt na oblúkové frézovanie - Predĺženie stola vľavo a vpravo Model: minimax ti 55es LL Objednávacie číslo: 5502252 Technické údaje: Rozmery pracovného stola: 2500 x 655 mm Rozmery formátovacieho posuvného stola: Užitočná dĺžka vretena: 125 mm Max. priemer nástroja: 240 mm Max. priemer nástroja pri zapustenom vretene: 230 mm Max. priemer čapovacej frézy: 320 mm Náklon vretena: 0 až -45 stupňov Rýchlosti: 3500/6000/8000/10000 ot./min Výkon motora 400 V/50 Hz/S6-40%: 5,0 kW Dodpfxodqzh Ro Am Tocl Priemer hrdla odsávania: 2 x 120 mm

Stav: nový, Rok výroby: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer offers ideal conditions for modern production: It produces cleanly planed surfaces, is quick and simple to operate, and runs extremely quietly. The standard electronic control system, with 99 storable planing dimensions, makes adjusting the planing height easier than ever, ensuring the first workpiece fits perfectly every time. The thickness table can be adjusted with the simple press of a button or incrementally in 0.1 mm steps. The feed control switches are also conveniently positioned within easy reach. The heavy, vibration-damping composite frame and high-quality cutterhead bearings guarantee outstanding surface finishes. The sound-insulated construction ensures quiet operation, even in the standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Operation: 1-axis control for planing dimension, max. 99 values storable, 49 programmable for custom planing sequences; pushbuttons for manual rapid and fine adjustment of planing thickness with digital display, pushbuttons for cutterhead start/stop, integrated hour meter • Cutterhead: TERSA solid steel cutterhead Z4 Ø 125 mm; includes locking feature for easy knife changes • Thickness table: Electric height adjustment with fine setting, feed rate 10 mm/s, safely supported on four lead screws, precision-planed table surface • Feed: 2 speeds: 6 / 12 m/min, electrically selectable during operation, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left or right (both sides optional for special requirements); minimum extraction rate: 27 m³/min. at 20 m/s • Maintenance: Central lubrication rail for oiling points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun filled with long-life grease 1 oil can 1 spanner Dcsdpfoqlckpox Am Tel 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emissions: Workplace sound pressure level LpA per DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA per DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: low-dust per DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Rok výroby: 2016, stav: dielensky repasované (použité), Agregát s 2 hydraulickými prítlačnými topánkami zhora na bezposuvové stlačenie lepených doskových lamiel v mechanickom lise. (Namiesto veľkého kladiva alebo ťažkých závaží na háku žeriava) Pohon SEW s prevodovým motorom a trecím kolesom 1,1 kW. Hydraulický agregát 5,5 kW. Objem olejovej nádrže: 160 l. Tlak: 40 / 250 bar. Stroj bol v roku 2012 kompletne repasovaný a vybavený novou riadiacou skrinkou a novou elektrickou inštaláciou. Keďže zákazník nesplácal splátky, stroj sme po cca 1,5 roku prevzali späť. Stroj bol v prevádzke maximálne 1 rok na hodinovej báze. Dcedpfx Ajd Dcmqom Tel

Stav: nový, Rok výroby: 2025, prevádzkové hodiny: 2 h, Funkcionalita: plne funkčný, pracovná šírka: 400 mm, priemer kefovacej jednotky: 210 mm, celková dĺžka: 1 350 mm, celková šírka: 900 mm, celková výška: 1 540 mm, typ nastavenia výšky: mechanický, celková hmotnosť: 500 kg, priemer odsávacej trysky: 100 mm, výška obrobku (max.): 315 mm, šírka obrobku (max.): 400 mm, Valcová kartáčovačka VALMEC Master 400 Specifikace: • stav – nový • výrobce – VAL.MEC • model – Master 400 • pracovní šířka – 400 mm • max. pracovní výška – 315 mm • průměr kartáčů – 210 mm • první kartáč – ocelový • druhý kartáč – tynexový • výkon motorů – 2 x 3,0 kW + posuv 0,37 kW • spouštění motorů – 0-1 • rychlost dopravníku plynule regulovatelná frekvenčním měničem v rozsahu 4–12 m/min • možnost změny směru otáčení zadního kartáče • nezávisle nastavitelná výška obou agregátů • výstup pro odsávání pilin – průměr 100 mm • hmotnost – 500 kg • kompletní dokumentace od výrobce • rozměry: 135 x 90 x 154 cm (délka x šířka x výška) Další informace: • stroj nový, ve výrobním stavu • přiložené fotografie zobrazují skutečný stav nabízeného stroje Dedpfxouwdb Es Am Tecl • stroj dostupný do 7 pracovních dnů