Kombinovaný hoblík a hrúbkovačka

Holzkraft SCM FS 41 Classic Tersa

Stav: ako nová (výstavný stroj), Rok výroby: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, residual dust content less than 0.1 mg/m³. High extraction capacity with minimal space requirements. Maximum performance in this class. Very quiet operation. Application Area Clean air extraction systems for wood chips and wood dust Designed for commercial operation Suitable for all woodworking machines with corresponding extraction nozzle diameter Can be used for multiple dust sources High-quality, well-thought-out construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be easily switched from left to right, for flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for immediate use Mobile Description of the Filter Ultra-compact with maximum filter surface Filter material made of polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic design, certified and approved to M-BIA category Filter resistance monitoring via differential pressure switch, adjustable, with warning light on control box The fan is installed downstream of the filter Features: With newly developed locking device for secure positioning of the container All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of Delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-configured for connection of machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure attenuator available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow: 1095 m³/h Max. air flow: Vacuum at nominal flow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of suction nozzle to floor: 850 mm Gbjdpfecnw U Djx Ahuog Weight: 194 kg Location: Coming into stock at 54634 Bitburg

Stav: použitý, AD hobľovačka Minimax 400, vo veľmi dobrom stave, šírka stola 410 mm, 4 nože, dĺžka stola 2600 mm Gedpfx Ahjwzzdysujbg Zmena ceny vyhradená, zmeny a tlačové chyby vyhradené.

Stav: ako nová (výstavný stroj), Rok výroby: 2021, Pracovná šírka: 520 mm Hoblíkový valec: tersa Počet nožov: 4 Dĺžka rovnačky: 2720 mm Nastavenie stola rovnačky: páka Nastavenie dutých a ostrých spojov: nie Ukazovateľ úberu triesky: stupnica Ukazovateľ dutého a ostrého spoja: - Gbodpfx Ahogr Udveueg Nastaviteľný uhol pravítka rovnačky: áno Výkon motora: 7 kW Dĺžka stroja: 2800 mm Šírka stroja: 1000 mm Hmotnosť: 870 kg

Stav: nový, Rok výroby: 2026, Putz P4 cement Určený na omietky pripravované priamo na stavenisku: CEMENT, PIESOK, VÁPENKA Motor čerpadla: 5,5 kW Motor miešača: 2,2 kW, 55 ot./min Výkon pre čerpadlo 2L6: cca 25 l/min Výkon pre čerpadlo 2L6+++: 45 l/min Kompresor: 350 l/min Objem zásobníka: 130 l Objem miešača: 130 l Výška po miešač: 118 cm Výška zásobníka čerpadla: 71 cm Šírka zásobníka čerpadla: 64 cm Gbjdjtuiqyjpfx Ahuog Dĺžka bez skrutkového dopravníka: 165 cm Hmotnosť: 360 kg Súčasťou balenia: Pracovná hadica Vzduchová hadica Striekacia pištoľ Čistiaca guľa na hadicu Skrutkový dopravník 2L6

Stav: pripravené na použitie (použité), Rok výroby: 1974, Funkcionalita: plne funkčný, číslo stroja/vozidla: 74-4-10, Formátová cirkulárna píla ALTENDORF F90, rok výroby 1974 Výrobné číslo: 74-4-10 Výrobca: Altendorf Nemecko Dĺžka rezu mm: 2600 Šírka rezu mm: 1 300 mm Max. výška rezu mm: 130 Godpfxjipvrbe Ahujbg Max. priemer pílového kotúča: 400 mm Hlavný motor: 5,5 kW S predrezávačom 4 stupne rýchlosti Nastavenie výšky pílového kotúča: manuálne Hmotnosť cca kg: 780 Technické údaje bez záruky

Stav: nový, Rok výroby: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table in anodized aluminium Robust steel and cast iron frame Large support area and precise cast table High-precision format sliding table in anodized aluminium (travel distance 2,250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence, extendable up to 2,660 mm, with professional flip stops Max. saw blade Ø 315 mm with scorer, tiltable from 90°–45° Gbodpfohp Rdlex Ahuog Rip fence with fine adjustment Robust saw unit and large double trunnion spindle moulder assembly for ultimate stability, precision, smooth running, and extended service life Solid and precise machine table in stress-relieved cast iron Three spindle speeds, manually adjustable, from 3,500–10,000 rpm Spindle with reverse rotation Standard curved milling guard Aluminium safety flip stop jaws Two high-capacity motors Two plug-in handwheels for convenient, quick operation Dimensions & weights Weight approx. 470 kg Dust extraction Extraction port diameter: 2 x 120 mm Extraction port diameter for saw blade guard: 60 mm Electrical specification Motor power: 2 x 5.0 kW Voltage: 400 V Frequency: 50 Hz Spindle moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3,500 / 7,000 / 10,000 rpm Max. cutter diameter: fixed: 210 mm retractable: 180 mm Tenoning: 275 mm Panel saw unit Crosscut length: 1,600 mm Cutting width with rip fence: 900 mm Max. crosscut width, left of blade: 2,660 mm Saw blade tilt: 90–45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm Note: Saw blade diameter independent of scorer (Main) saw blade speed: 4,000 rpm Sliding table and work table Table length: 1,112 mm Table width: 430 mm Scope of delivery: Curved milling guard Anodized aluminium sliding table Aluminium stop jaws Flip stops Location: ex-stock 54634 Bitburg - Available immediately -

Stav: nový, Rok výroby: 2022, Pracovná šírka: 410 mm Hobľovací valec: s pásovými nožmi Počet nožov: 3 Dĺžka zrovnávacieho stola: 1800 mm Nastaviteľný uhol zrovnávacieho pravítka: áno, 45° až 90° Výkon motora: 4,4 kW Motorová brzda: áno, automatická Priemer odsávacieho pripojenia: 100 mm Dĺžka stroja: 2000 mm Šírka stroja: 750 mm Gbjdpfegzln Hex Ahuog Hmotnosť: 295 kg

Stav: pripravené na použitie (použité),

Stav: nový, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast-iron construction - Equipped with a fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward and reverse rotation - Large cast-iron milling unit, mounted directly to the table - Extraction hood under the worktable for improved dust extraction - Solid and precise cast-iron table - Fast and easy speed change - Powerful 5.0 kW motor - Standard fitted with curved guard hood - Quality Made in Italy Equipment Details Cast-Iron Milling Unit - Directly mounted to the milling table - Spindle is mounted high up with precision ball bearings, ensuring minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Equipped with a powerful three-phase motor Cutter Guard The standard cutter guard is equipped for maximum safety with an adjustable guide rail and protective plate as standard. Fencing - Precise fence with quick adjustment and fine adjustment with scale on the fence jaw - Integrated extraction port provides a clear view Table Opening - Large table opening allows for the use of larger raised panel cutters and tenoning as well as mortising tools above and below the table Curved Guard Hood - Standard equipment included Reversible Fence Jaws - Versatilely integrable fence for bridging the tool gap - Enables safe work even with narrow workpieces Accessories HOLZKRAFT Safety System Fence Jaws, adjustable - Optimum protection on every spindle moulder, individually adjustable to the specific task - Universal base elements for mounting AIGNER safety and working devices - Quick setting by simultaneous clamping of all individually movable rods - Made from high-quality aluminium - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No.: 5851000 - 650 mm: Art. No.: 5851650 TECHNICAL DATA Dimensions and Weights Weight (net): approx. 240kg Extraction Connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1000mm Worktable width: 575mm Table height: 900mm Setup Information Required space length: 1945mm Required space width/depth: 920mm Required space explanation: Dimensions take into account maximum travel or usable lengths. Machine body length: 1000mm Machine body width/depth: 575mm Gbedpfxskyt Ulj Ahuog Working area length: 1600mm Working area width/depth: 1600mm Explanation working area: Please add the specified values to the required space to obtain the recommended free setup area for the machine. Electrical Data Connection voltage: 400V Mains frequency: 50Hz Drive motor power: 5.0kW Spindle Usable spindle length: 100mm Max. spindle projection above the table: 130mm Spindle speed(s): 3500/7000/10000 rpm Spindle diameter: 30mm Max. Cutter Diameter Max. tool diameter retractable: 180mm Max. profiling cutter diameter: 210mm SCOPE OF DELIVERY - Curved guard hood - Aluminium fence jaws Holzkraft specialist dealer – Accessories available on request!

Stav: použitý, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tonnes, maximum specific pressing pressure 2 kg/cm² Heating 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction system for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine on chassis Installation footprint according to manufacturer 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture and delivery scope according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as seen. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock Gsdpoxl Ha Sjfx Ahusbg