Kontinuálne vŕtacie zariadenie

HOMAG BST440/30/D

Rok výroby: 1998, stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Very robust roller conveyor line with hydraulic lift and lowering cross conveyor. 1st section: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Construction height 1,000 mm. Built-in hydraulic lift and lowering cross conveyor. Equipped with 4 chain strands. Distances: 1,500 – 1,300 – 1,000 mm. Fully sheeted. Hydraulic model support rollers. Drive via geared motor. New bearings. Hjdpfx Aast Hg Huo Usl 2nd section: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lift and lowering cross conveyor with 6 chain strands. Cantilever design, allows transverse conveying of sawn timber to the left or right underneath the roller conveyor. Fully sheeted. Includes hydraulic power unit for both roller conveyors.

Stav: použitý, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur Hjdpfxsuhbv So Aa Usl - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Maximum pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE OPERATING HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct path measuring systems - Synchronized tapping - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * with enclosure washing - Chip conveyor: Rear - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Stav: použitý, Rok výroby: 2006, Technické detaily: Pohyb v ose X: 800 mm Pohyb v ose Y: 800 mm Pohyb v ose Z: 800 mm Otáčky vřetena: 12 000 ot/min Upínání nástroje: SK 50 Řídicí systém: SIEMENS 840D shopmill Zařízení na výměnu nástrojů: 240 pozic Velikost palety: 630 x 630 mm Vřeteno: 52 kW / 430 Nm Celkový příkon: 87 kVA Hmotnost stroje přibližně: 15 t Horizontální obráběcí centrum s paletovým zásobníkem, NC otočný stůl, dvoupaletový výměník, IKZ 40 bar (vnitřní chlazení nástroje), příprava pro infračervenou měřicí sondu Renishaw MP 10, bez sondy, kontrola lomu nástroje – mechanická, MMS (minimální množství mazání), foukání vzduchu středem vřetena, odtah olejové mlhy – elektrický, elektrické ruční kolečko, Hodpfxspumdco Aa Ujl funkce TRANSMIT, balíček pro přesnost, BA 4, vrstvené bezpečnostní sklo pravé dveře, včetně paletového zásobníku FASTEMS FPC 1000 pro celkem 14 palet, včetně stanice na přípravu, regálového zakladače, hlavního počítače a 10 palet cca 98 500 provozních hodin (hlavní vypínač ZAPNUT) cca 45 500 hodin vřetene

Stav: veľmi dobrý (použitý), Rok výroby: 2005, Heidenhain digitálny odpočítavač Fehlmann krížový stôl KS 322 D Pracovný rozsah: Pinolový zdvih Z-os 110 mm Pojazd hlavy stroja 450 mm Vzdialenosť stôl–vreteník 0 – 527 mm Rýchlovýmenné systémy SF 32 Pracovné vreteno 2,9 kW Hedpfx Aajwkrp Ej Usl Otáčky plynulo nastaviteľné 50 – 6300 ot./min Upínacia plocha 320 x 670 mm Rozmery a hmotnosť: Priestorové nároky š x h x v 1,5 m x 1,35 m x 2,1 m Hmotnosť cca 850 kg

Stav: veľmi dobrý (použitý), Rok výroby: 2019, Kolbus AutoBox AB rok výroby: 2019 stroj na výrobu škatúľ jednoduchá obsluha servomotorické ovládanie rýchla výmena zákazky vhodný pre vlnité škatule umožňuje výrobu škatúľ na požiadanie modul MC MultiCut modul PR Hjdpfex El N Iox Aa Usl mnoho typov škatúľ (FEFCO) dryážkovanie, priečne a pozdĺžne rezanie, narezávanie vrátane rôzneho vybavenia (lepidlo, nové nože) výstupná sekcia pripravený na použitie dobrý stav okamžite k dispozícii

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, Línea de descortezado Cambio 500 compuesta por: - Unidad de centrado de alimentación. - Cambio 500: rotor con apertura de 495 mm. Diámetro mínimo de tronco 90 mm. Motor principal de 55 kW. Motor de avance de 11 kW. 80 m /min. Rotor hidráulico y rodillos de avance hidráulicos. - Unidad de extracción de control. Hedpfjwxdimjx Aa Uol - Tolva basculante para madera de longitud completa. - Piezas de repuesto.

Stav: dielensky repasované (použité), Rok výroby: 2007, prevádzkové hodiny: 22 605 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 600 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 1 400 kg, celková hmotnosť: 36 000 kg, kapacita olejovej nádrže: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data - Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed chute dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connection rating: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Hsdpfx Aaevf E Avj Uel Throughput at bulk densities: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank volume: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions, baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight (baler only): approx. 36 t Notes: The baler has been partially overhauled, serviced in our workshop, tested upon completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works were carried out: - Derusting and partial repainting of the baler - Hydraulic oil tank drained, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press lid cylinders, and press channel cylinder disassembled, inspected, honed, all seal kits renewed, and final pressure test performed - Pre-press lid with bearings and bearing housings dismantled. 1st and 3rd arc segments removed and newly welded - Both bearings of the pre-press lid shaft replaced - Upper material deflector on pre-press lid frame replaced - Press ram dismantled, checked, and both front rollers renewed - Material deflector and wear profiles on sides and bottom of press ram removed and newly welded - Horizontal and vertical needle and tying units dismantled, checked, plastic slide plates, driller shaft bearings, and wire guide pulleys in the needle heads replaced - Both brass slide rails on left and right cover of the press ram replaced - Both wire deflection units with bale retention clamps completely renewed - Wire inserting unit including hydraulic cylinder below needle guides completely renewed - Wire inlet grooves on floor and side walls of press channel welded and smoothed - General maintenance and service work carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored No liability is assumed for the technical data or possible mistakes.

Stav: použitý, Rok výroby: 2010, Overview Hjdpfx Ast Ul Exsa Ujl This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is only being replaced due to an increase in required capacity. Technical Details Rated capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 units Total bottle cells: 7,860 units Loaded bottle cells: 7,680 units Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Water: 7.35 m³/h Bath volumes Pre-soak: 2,263 l Pre-lye: 7,240 l Lye 1: 31,755 l Lye 2: 350 l Hot water 1: 350 l Hot water 2: 350 l Cold water: 350 l

Stav: použitý, Rok výroby: 1996, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 10 000 mm, zdvih osi Y: 2 600 mm, zdvih osi Z: 700 mm, Výrobca: PAMA Model: SPEEDRAM 1 CNC Rok výroby: 1996 Priemer vretena: 140 mm Pozdĺžny pojezd (X): 10 000 mm Vertikálny pojezd (Y): 2 600 mm Pojezd pinoly (Z): 600 mm Rozmer pinoly: 360 x 320 mm Vysunutie vretena: 700 mm Kužeľ vretena: ISO 50 Výkon motora vretena: 50 kW Otáčky vretena: 6 ÷ 2000 ot./min. Ovládanie CNC: Selca 3045 Automatický výmenník nástrojov: 60 pozícií Hodpfx Aswzh Apea Uol Celková hmotnosť: 65 t Vybavenie a príslušenstvo Komplet vrátane: - 1 ks automatická univerzálna frézovacia hlava - 1 ks základová doska 6000x2500x300 mm - 1 ks základová doska 4500x2000x300 mm - Otočný stôl 2000x1600 mm s dĺžkou pojazdu 2000 mm - Nosnosť stola: 15 t - Vyrovnávacie pätky

Stav: použitý, No. 3176 WEINIG Hydromat 1000 Planing and Profiling Moulder Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 – 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool cutting circle 125 – 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivelling, pneumatic feed roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool cutting circle 112 – 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 5th spindle horizontal top as sawing spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivelling, pneumatic 6th spindle horizontal bottom as sawing spindle Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool cutting circle 112 – 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment opposite left spindle, axial 35 mm Hjdpfx Aaju Agh Ss Usl Shortened roller spacing to the right-hand spindles Metre counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers above the table 1 powered, toothed roller in the table, side pressure roller Automatic Waxilit pump/lubricating pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, toothed rollers in outfeed table 2 powered, toothed rollers in machine table Pressure beam before and outfeed after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment for the upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex-location near South Tyrol, without transport and installation Subject to errors in description and pricing Transport and loading by us optionally possible To avoid possible misunderstandings, on-site inspection after appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines – sold as inspected Pictures and videos are for sample purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location