Procesor 68340 HC010

HOMAG

Stav: neskontrolované (použité), Rok výroby: 2005, Funkcionalita: neoverené, výška obrobku (max.): 40 mm, maximálna hrúbka hrany: 3 mm, posuv osi X: 35 m/min, otáčky (max.): 12 000 ot./min, počet pozícií v zásobníku nástrojov: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed rate max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool stations End processing unit 2 motors Finishing unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Finishing unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Lsdpfx Aoyqybuea Hori Control system: PC 22 EQUIPMENT Pressure with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Pressure roller set for edging with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 5321

Stav: neskontrolované (použité), Rok výroby: 2007, Funkcionalita: neoverené, výška obrobku (max.): 60 mm, maximálna hrúbka hrany: 20 mm, model regulátora: POWER CONTROL PC22, otáčky (max.): 12 000 ot./min, TECHNICAL DETAILS Workpiece Dimensions Ljdpsyqx U Hsfx Aa Hori Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot: for EVA hot-melt adhesive Pre-melter: for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stav: neskontrolované (použité), Rok výroby: 2005, Funkcionalita: neoverené, výkon: 19 kW (25,83 k), pojazdová vzdialenosť osi X: 4 175 mm, zdvih osi Y: 1 730 mm, počet vretien: 20, Počet nástrojových staníc v nástrojovej revolverovej hlave 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine places: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled Lrsdsyttf Sepfx Aa Hoi MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE mark Front safety cover Note: Cones, cutters, and units are not included in the scope of delivery. Safety fences are supplied according to availability (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6906

Stav: neskontrolované (použité), Rok výroby: 2008, Funkcionalita: neoverené, pojazdová vzdialenosť osi X: 4 175 mm, zdvih osi Y: 1 550 mm, výška obrobku (max.): 40 mm, počet vretien: 30, maximálna pojazdová rýchlosť: 80 000 mm/min, TECHNICAL DETAILS Travel path X-axis: 4,175 mm Travel path Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverses: 8 Spindles Number of spindles for vertical drilling: 20 Lrjdoyttcwopfx Aa Hsi Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and usage of the machine at the destination. External reference: 7350

Stav: neskontrolované (použité), Rok výroby: 2008, Funkcionalita: neoverené, maximálna hrúbka hrany: 3 mm, posuv osi X: 25 m/min, otáčky (max.): 12 000 ot./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End trimming Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top milling station No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Lsdpfxjytr Hbj Aa Hori Edge Processing Unit 4 Unit: Top router Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue scraper Model: FA11 Edge Processing Unit 7 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Software for programming the machine: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and accepted"), based on photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6216

Stav: veľmi dobrý (použitý), FLEXIBILNÁ VÝROBA LOS-VEĽKOSŤ 1 A JEDNOSTRANNÁ OHRANOVAČKA HRÁN (pravá strana) Zostávajúca z nasledujúcich strojov: M.01) ZÁSOBNÝ STÔL A AUTOMATICKÝ SYSTÉM VRACANIA OBROBKU "BARGSTEDT" mod. PROFI TBR100/20/30/F Ledpfsinigmjx Aa Hsri M.02) JEDNOSTRANNÁ OHRANOVAČKA HRÁN (pravá strana) "HOMAG" mod. Profi KAR350/12/A Hrúbka panelu (min/max) mm 8 / 60 - Pracovná šírka (min/max) mm 200 / 1200 Riadenie/softvér PC 22 Podávacia rýchlosť (nastaviteľná) m/min 18 - 32 Vstupný panelový systém WZ 14/30 Predfrézovacie agregáty so CN riadením (2 x 3 kW) DVOJITÝ lepiaci agregát (PUR lepidlo + predtavovač) 2 x PU 34 Tlaková zóna (CN riadená) - zásobník pre rolky (12 pozícií) Orezávací agregát WK13 (fázový/rovný, automatické nastavenie) Predfrézovacie agregáty (2 x 0,55 kW) pneumatické nastavenie Viacprofilový frézovací agregát (CN riadený) MF 21 (2 x 0,55 kW) Kopírovací tvarovací agregát FF 32 (4 x 0,4 kW) automatická výmenná jednotka Kontúrovací frézovací agregát (pre finálne frézovanie) CN riadený FK 31 (30 m/min), nedávno pridaný po technologickej modernizácii Viacprofilový stierací agregát (servo, CN riadený) MN 21 Dokončovací agregát (plochá stierka + leštiaci agregát) FA 11 Universálny frézovací agregát na drážkovanie, falcovanie a profilovanie UF 11 (1 x 4 kW) M.03 ) NAKLADACÍ A ZÁSOBNÍKOVÝ SYSTÉM "BARGSTEDT" mod. TFU200/L/30/12/S

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line capacities (selection): • Multi-blade saw feed: 2–48 m/min • Bundle formation: max. 100 pieces/min • Packaging: up to 12 packages/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for feeding raw panels (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return & light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for the feeding system • Capacity approx. 12 pallets • Stack height max. 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers Ljdpfx Aoywxrasa Hori 5. Brushing Unit (after longitudinal saw) Horsehair brush, working width 2,200 mm, with extraction system 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed with pressure beam • Cutting width 2,200 mm • Pneumatic upper pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner (2×8 compartments) for breaking up multi-piece associations • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer Unit (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to profiling line Profiling (Soundproof Encapsulation) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool Ø up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical power specifications • Integrated edge sealing 11. Sonolit Sound Insulation Cabin Enclosure for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-Processing 12. BARGSTEDT TTK44/21/14/02 Turning Device Workpiece turning in throughfeed • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Formation Station Automatic bundle formation with 1st/2nd quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and providing cartons before packaging • Capacity up to 12 packages/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • Up to 10 packages/min guaranteed 17. Labelling Station Automatic bundle labelling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packages/min • Film width up to 800 mm 19. BARGSTEDT TFB20/017/04 Belt Conveyor with Air Nozzle Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacking Automatic stacking of bundles onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layered palletizing with vacuum suction cups • Up to 6 cycles/min • Bundle weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Stav: použitý, číslo stroja/vozidla: 008395, Pracovný rozsah os X: 3050 mm Pracovný rozsah os Y: 1250 mm Výkon hlavného vretena: 10 kW Počet riadených osí: 3 osi Počet vŕtacích vreten: 27 Počet pozícií nástrojov: 8 Ledjygtcqjpfx Aa Heri

Stav: použitý, číslo stroja/vozidla: 007985, Typ použitej hrany: tenká hrana, silná hrana, masívne drevo Lepidlový systém: EVA Predfrézovanie: áno Lredpfex A Th Djx Aa Hoi Multifunkčná jednotka: áno Pracovné agregáty: 7 ks

Stav: použitý, číslo stroja/vozidla: 008323, Typ pripevnenej hrany: tenká hrana, hrubá hrana, masívne drevo Lepiaci systém: EVA, PUR Lodpfx Aaex Hpkxe Hori Frézovanie spojov: áno Multifunkčné agregáty: áno Max. posuvná rýchlosť: 20 m/min Maximálna hrúbka dosky: 60 mm Pracovné agregáty: 7 ks