Olepička hrán Homag Edgeteq S 200 2018 s predfrézovaním

Homag

Stav: neskontrolované (použité), Rok výroby: 2005, Funkcionalita: neoverené, výška obrobku (max.): 40 mm, maximálna hrúbka hrany: 3 mm, posuv osi X: 35 m/min, otáčky (max.): 12 000 ot./min, počet pozícií v zásobníku nástrojov: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed rate max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool stations End processing unit Iaodpeyqybuefx Agmsp 2 motors Finishing unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Finishing unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Pressure roller set for edging with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 5321

Stav: neskontrolované (použité), Rok výroby: 2007, Funkcionalita: neoverené, pracovná šírka: 1 935 mm, počet vretien: 40, výška dosky: 350 mm, pracovná dĺžka: 6 200 mm, počet osí: 4, TECHNICAL DETAILS X-axis working range: 6,200 mm Y-axis working range: 1,935 mm Maximum panel thickness: 350 mm Number of edge band magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Iaedpfxoyqx U Hs Agmep Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in the X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stav: neskontrolované (použité), Rok výroby: 2005, Funkcionalita: neoverené, výkon: 19 kW (25,83 k), pojazdová vzdialenosť osi X: 4 175 mm, zdvih osi Y: 1 730 mm, počet vretien: 20, Počet nástrojových staníc v nástrojovej revolverovej hlave 1: 18, TECHNICAL DETAILS Iasdjyttf Sopfx Agmsp Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine places: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE mark Front safety cover Note: Cones, cutters, and units are not included in the scope of delivery. Safety fences are supplied according to availability (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6906

Stav: neskontrolované (použité), Rok výroby: 2008, Funkcionalita: neoverené, pojazdová vzdialenosť osi X: 4 175 mm, zdvih osi Y: 1 550 mm, výška obrobku (max.): 40 mm, počet vretien: 30, maximálna pojazdová rýchlosť: 80 000 mm/min, TECHNICAL DETAILS Travel path X-axis: 4,175 mm Travel path Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Iedpeyttcwofx Agmoap Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and usage of the machine at the destination. External reference: 7350

Stav: neskontrolované (použité), Rok výroby: 2008, Funkcionalita: neoverené, maximálna hrúbka hrany: 3 mm, posuv osi X: 25 m/min, otáčky (max.): 12 000 ot./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End trimming Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top milling station No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Iasdpfjytr Hbjx Agmjp Edge Processing Unit 3 Unit: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top router Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue scraper Model: FA11 Edge Processing Unit 7 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Software for programming the machine: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and accepted"), based on photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6216

Stav: veľmi dobrý (použitý), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTRE Moving platen (workpiece), stationary machining head - horizontal platen (workpiece). Control system: PowerControl PC86 power Touch (woodWOP software) Safety enclosure for machining head Iedpfx Ageyu S I Ismoap No. 2 safety interlocks for workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces on machines with clamping grippers. Infeed support table (workpiece support) – Outfeed table (with motorized conveyor) With automatic platen pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1000 (optional 1300) x 80 mm (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) With separate electrical cabinet and control panel WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drill head power: 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (pivotable 90° in X-Y direction), saw blade diameter: 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drill head power: 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (pivotable 90° in X-Y direction), saw blade diameter: 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW)

Stav: veľmi dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, Špecifikácia: Dĺžka rezu: 4300 mm Šírka rezu: 4300 mm Výška výstupu pílového kotúča: 80 mm Ovládací panel na pravej strane Stôl stroja plne vzduchovo odpružený Rýchlosť programovateľného dorazu vpred: 25 m/min Rýchlosť programovateľného dorazu vzad: 90 m/min Štandardné upínače: 225, 325, 475, 775, 1075, 1825, 3425 mm Power Concept – umožňuje súčasné rezanie viacerých pásov s rôznymi dĺžkami priečneho rezu s výkonom vyšším až o 40 % Ovládanie výšky prítlačnej lišty Rýchlosť pílového vozíka: 130 m/min Hlavný motor píly: 11 kW s pneumatickým zdvihom Iasdeyuw Umjpfx Agmsp Predrezová jednotka: 1,5 kW s pneumatickým zdvihom Elektronické nastavovanie predrezovej píly priamo z ovládacieho panelu 4 kusy vzduchových stolov: 2160 x 650 mm Tlačiareň etikiet 400 V, 50 Hz Dotykový ovládací panel Control Touch Prenos dát cez sieť a USB port CE Technológia Eco Plus šetrí až 20 % energie

Stav: použitý, Rok výroby: 2003, Funkcionalita: plne funkčný, číslo stroja/vozidla: 0/200/06/3164, celková hmotnosť: 6 500 kg, celková dĺžka: 12 600 mm, hmotnosť obrobku (max.): 5 500 kg, Softformovacia olepovačka hrán, v prevádzke, použitý stav, rok výroby 2003, Iaedovx Ep Nepfx Agmep

Stav: veľmi dobrý (použitý), JEDNOSTRANNÁ OLEPOVAČKA HRÁN (ľavá) Hrúbka hrán (páska v roliach) (min/max) mm 0,3 / 3 Hrúbka hrán v pásikoch / lištách (min/max) mm 0,4 / 20 Hrúbka panelov (min/max) mm 8 / 60 NOVÉ (v roku 2024) Číselné riadenie EDGETEQ MOD – Power Touch (WoodCommander) Nastaviteľná posuvná rýchlosť až do 25 m/min Vstupný podávací systém EZ 14 Zariadenie na rozprašovanie (antipadací roztok) Prítlačné oplotenie, nastaviteľné cez CNC Predfrézovacia jednotka (vertikálne frézky na spoje) 2 x Kw 3 Lepiaca jednotka (P.U.R. lepidlo + systém rýchleho tavenia) Oblasť prítlaku pásky, nastaviteľná cez CNC Podpora cievok hrán (s 2 bubnami) Isdpfeyt Izbsx Agmsap Rezacia jednotka koncov (skracovanie) HL 84 (2 x Kw 0,5 cca.) Pneumatické naklápanie a nastavovanie Hrubovacia orezávacia jednotka BF 20 (2 x Kw 1,5 cca.) Multifunkčná jednotka (profilové orezávanie) FK 11 (2 x Kw 0,4 cca.) Jednotka na orezávanie profilu hrán Jemná dokončovacia jednotka (stierač lepidla + leštiaca jednotka) FA 11 Systém návratu panelov "LIGMATECH" Mod. ZHR 541/L/095 (s portálovým mostom a 360° otočnou vákuovou hlavou)

Stav: veľmi dobrý (použitý), Rok výroby: 2017, Funkcionalita: plne funkčný, výkon: 7 kW (9,52 k), vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, Výbava: dokumentácia / manuál, OPTIMAT BHX055 Ijdpfx Agsyvh Dpjmeap