Olepička hrán Homag OPTIMAT KDF 450 C EDGETEQ S-3

Homag OPTIMAT KDF 450 C EDGETEQ S-300

Stav: použitý, Rok výroby: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit including DIA tools; jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station with radius R 2.5 mm. Technical Description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF cross-cutting station (16,000 rpm) for front and rear edge overhangs - HF milling station (16,000 rpm) with replaceable cutter heads (combination execution) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller pressure beam - Aggregate inspection windows from both the rear and operator side - PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic milling cutter adjustment, 1 pc; switching between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is manual via the stop flap inside the machine. Psdpfx Afjxfh Tmjpsrd Polishing station (buffing wheel) 1 pc. Corner rounding cutter 1 pc including combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper 1 pc including pneumatic lift-off device radius R 2.0 mm. Flat scraper 1 pc with pneumatic control. Glue station quick-change system including 2nd glue pot and bottom glue discharge, for rapid color change (1 pc.) Grooving saw unit, horizontal, into the edge (1 pc) including pneumatic lift-off and grooving tool. Separate extraction for jointing unit (1 pc), directly on the jointing unit, vertically upwards, d=80 mm for optimal extraction performance; strongly recommended from AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm (1 pc) Ball bearing for corner rounding cutter 24.2 mm (1 pc) Exchangeable motor 0.37 kW for corner rounding cutter (1 pc) with quick-change device including radius cutter R 1 Change spindles, 1 set = 2 pieces, 1 pc 1 set of quick-change motors for longitudinal processing top and bottom, incl. tool R 1 Compressed air requirement: 100 - 150 l/h Location: Nattheim

Stav: použitý, číslo stroja/vozidla: 007793, Typ pripevnenej hrany: tenká hrana, hrubá hrana, dyha Lepiaci systém: EVA Zarovnávanie frézovaním: áno Prsdpfx Afsv Tfydepod Multifunkčné agregát: áno Max. posuvová rýchlosť: 11 m/min Maximálna hrúbka dosky: 60 mm

Stav: veľmi dobrý (použitý), Jednostranná olepovačka hrán (ĽAVÁ) Hrúbka hrany v rolkách (min/max) mm 0,3 - 3 Hrúbka hrany v lištách / pásoch (min/max) mm 3 - 12 Prodpfx Afjd Nuu Hsped Hrúbka dosky (min/max) mm 8 - 60 Ovládanie: ICOS open TS Posuvná rýchlosť m/min (plynule nastaviteľná) 4 - 20 Horný prítlak poháňaný klinovým remeňom Sprejovacie zariadenie (na kvapalné antiadhézne prostriedky) Predfrézovacie zariadenie 08.376 (2 x 3 kW) Lepiaca jednotka (horúci tavný lepidlo) 283.1513 Tlaková zóna na hrany Zásobník na hrany v rolkách (počet komôr) 1 Kapovacie zariadenie 08.415 (2 x 0,66 kW) Frézovacie zariadenie 08.055 (2 x 1 kW) 0°-30° Multifunkčné zariadenie (frézovanie polomeru a tvarové frézovanie) 08.342 (2 x 0,66 kW) servo Profilové stieracie nože 08.519 Ploché stieracie nože 08.50 Leštiace zariadenie 08.612 (2 x 0,25 kW)

Stav: veľmi dobrý (použitý), Rok výroby: 1993, OTT model JU 2513 Hydraulický dýhovací lis s elektrickými vyhřívacími deskami Podválcové provedení BUSSE elektrické topné desky Centrální ovládací panel se všemi ovládacími prvky Analogový ukazatel teploty pro obě topné desky Lisovací tlak plynule nastavitelný pomocí tlakového spínače Psdpfoxgpaqsx Afperd Hlavní vypínač dvoustupňové hydraulické čerpadlo s automatickým přepínacím ventilem z nízkého na vysoký tlak Bezpečnostní trhací lanko Vyrovnávání ozubené tyče Omezení zdvihu CE Lisovací plocha: 2500 x 1300 mm Počet lisovacích válců: 4 Celková lisovací síla: 70 t Provozní napětí: 3 x 400 V + N, 50 Hz. Celkový příkon: cca 20,3 kW Půdorysná plocha (D x Š x V): cca 2900 x 1250 x 1900 mm Hmotnost: cca 3200 kg

Stav: použitý, číslo stroja/vozidla: 007134, Typ priloženej hrany: tenká hrana, silná hrana, masívne drevo Lepiaci systém: EVA, horúci vzduch Spájacie frézovanie: áno Multifunkčný agregát: áno Horný frézovací agregát: áno Max. posuvná rýchlosť: 25 m/min Maximálna hrúbka dosky: 60 mm Predpfot Hmtzsx Afpjd Pracovné agregáty: 10 ks

Stav: použitý, číslo stroja/vozidla: 008018, Typ pripevnenej hrany: tenká hrana, hrubá hrana, masívne drevo Lepiaci systém: EVA, PUR Frézovanie spojov: áno Prsdpfx Afjwv Dfcopjd Multifunkčné agregáty: áno Max. posuvná rýchlosť: 20 m/min Maximálna hrúbka dosky: 60 mm Pracovné agregáty: 7 ks

Stav: použitý, Rok výroby: 2009, HOLZ-HER Edge Banding Machine CONTRIGA 1366 Edge Thickness: 0.4-30 mm (depending on configuration) Edge Height: 51/66 mm (depending on configuration) Panel Thickness: 6-45/60 mm (depending on configuration) Edge Material Types: Edge banding from rolls or strips Feed Rates: Infinitely variable feed from 12-30 m/min (depending on configuration) - Adjustable infeed table in the magazine area (max. adjustment range: 30 mm) - Height-adjustable magazine plate to vary the lower edge overhang - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - With transport chain including automatic central lubrication - Motor-driven, position-controlled bridge height adjustment - Pneumatic stop roller for the shortest possible workpiece sequence - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically operated sliding covers along the entire machine (variations possible at individual units) - Motorized infeed guide - Injection oiler for all joints and bolts (including operating hour counter) - Central connection for extraction (2x Ø 200 mm) - Integrated chip collection box at end of machine (when radius scraper unit is installed) Control System PPC 231 - Power PC for efficient set-up and changeovers - 15" SVGA touchscreen - 128 MB CF memory card - On-board USB port - Ethernet network port - On-board keyboard port - Windows-like operating interface - All information in plain text and/or graphics - Swivel and tilt control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of units with basic settings for setpoints, reference points, and tool corrections, as well as fixed reference points - Central and clear fine adjustment for set-up processes for units and axis settings (depending on configuration) - Interval display for minimum workpiece distance - Integrated track control - Reference points are generally and program-specifically controlled - Clear and complete acquisition of all operating data - Service notifications in plain text - Diagnostic system - Integrated synchronous bus system for high accuracy in unit control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine Pjdpfx Afsvvkfdopjrd Spraying unit 1856 for infeed and outfeed areas For the infeed area: Electronically controlled release agent spray device, Release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray device, Cleaning agent Riepe-LP163/93 (only in combination with jointing unit 1961 and flat scraper 1964) Jointing Unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating Plunge depth: 5 mm With static frequency converter 200 Hz Without milling tool With ProLock insert clamp for fast tool change Tooling for 1803 (workpiece height up to 60 mm) 2 diamond cutters PRO UT (front and rear), incl. safety hoods Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-handed, 1x right-handed Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max. 2 mm at 60

Stav: takmer ako nový (použitý), Rok výroby: 2019, Predám olepovačku hrán Biesse JADE 240 Rok výroby: 2019. Špeciálna ponuka: Stroj prakticky NOVÝ!!! Konfigurácia: - Vstupná zóna manuálne nastaviteľná - Predfrézovacia jednotka pneumaticky nastaviteľná - Jednotka na olepovanie manuálne nastaviteľná - 2 lepiace nádrže pre EVA lepidlo - Lisovacia zóna manuálne nastaviteľná - Kapovacia píla pneumaticky nastaviteľná - Rádiusové frézovanie manuálne nastaviteľné - Oblúková jednotka s 2 motormi manuálne nastaviteľná - Rádiusová stieracia čepeľ manuálne nastaviteľná - Plošná stieracia čepeľ pneumaticky nastaviteľná - Leštiace kefy - Sprej na separátor vpredu - Centrálne mazanie - Horné podávacie valce - Manuálne nastavenie výšky Výška materiálu: 10-60 mm Hrúbka hrany: 0,4-8,0 mm Podávacia rýchlosť: 12 m/min Nalepených iba 9 250 m. Stroj prakticky NOVÝ!!! Prjdpfx Ajxncrvsfpjd CE značenie. Vrátane kompletnej dokumentácie a CD. Vo veľmi dobrom stave! Ihneď k dispozícii!

Stav: použitý, No. 3248 Prjdexrglnopfx Afped Horizontal Panel Saw HOLZMA Optimat HPP 380/38/38 Used, year of manufacture 2003 Machine still in operation, expected to be available from 19.01.2026 Cutting length: 3800 mm Cutting width: 3700 mm Saw blade projection: 95 mm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Main saw blade: 380 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 - 5.8 x 45 mm 7 grippers 3 air cushion tables, 1 with angle stop 3 roller elements at the front of the air cushion table Control software: Schnitt Profi(t) 9.0 / CADmatic V3.0 15" monitor (replaced January 2025) V-program carriage: up to 80 m/min V-saw carriage: up to 130 m/min Machine dimensions: 7205 x 6100 mm (L x W) Sale on behalf of customer, ex location near 90471 Nuremberg, without dismantling, transport or assembly Dismantling, loading, and transport by us available as an option Subject to errors in description and pricing To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale in current condition Technical data, condition descriptions, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Images and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stav: použitý, Holz Her STREAMER 1054 FÜ + PU Edge Thickness: 0.4 - 6 mm Modern control system with toggle switch for adjusting processing units Pre-milling unit for material preparation in front of glue section Fully automatic edge magazine for coil and strip materials Adhesive application station GLU-JET with cartridge + PU gluing Adhesive application via nozzle technology Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motor-powered Pneumatic end trimming unit for coil and strip materials up to 6 mm edge thickness With pneumatic adjustment for 0-10° inclination of end saws Pneumatic milling unit, flush trimming up to 6 mm, radius milling - chamfer milling - 15°, adjustable pneumatically via control panel Scraper unit for bevels and radii with 2 scraper holders Pneumatic infeed and withdrawal Flat scraper unit - finish PU spray system Prsdpfx Asxu E Nwsfpjd Machine is WORKSHOP-REFURBISHED and in TOP CONDITION