Obrábacie centrum - vertikálne

HWACHEON VESTA - 1000 + Ind. Device

Stav: použitý, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 – 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 – 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 – 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 stages: 1.5 – 150 rpm Maximum torque at rated speed: 220,000 Nm Giedoxddvnspfx Aftel Main motor drive power: 185 kW Flange centre tip angle: 70° Carriages Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 – 300 mm/min Infinitely variable feeds, cross: 0.3 – 120 mm/min Maximum cutting force at carriage: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange centre tip angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first carriage - Copying length: 8500 mm - Max. copying depth in a single pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 – 1000 mm - Max. boring depth in a single pass: 2700 mm At Ks of 200 kp/mm² – max. s = 1.5 mm/rev a = max. chip cross-section 30 mm² at overhang of 1000 mm Chip cross-section decreases with increasing boring depth A taper turning attachment with setting angle up to 8° and max. taper length (in one pass) of 2000 mm, setting accuracy ± 5 minutes. A taper turning attachment with setting angle up to 15° and max. taper length (in one pass) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on spindle head.

Stav: takmer ako nový (použitý), Rok výroby: 2022, prevádzkové hodiny: 13 116 h, Max. bar capacity mm: 20 Max. Z-axis travel, sliding/fixed head mm: 1) 205 / 80 Max. spindle speed rpm: 10,000 Drive power at 100%/40% duty cycle kW: 3.0 / 5.5 Torque at 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations (top turret): 8 Driven tool stations (top turret): 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder ø mm: 45 Drive power at 100%/40% duty cycle (tools) kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Gjdpfx Aewuddveftjil Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tool stations: 8 Max. tool speed rpm: 12,000 Tool holder ø mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working station: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder ø mm: 25 Sub-spindle: Max. spindle bore mm: 20 Max. speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant System (Basic Unit): Pump pressure bar: 3 / 8 Tank capacity l: 250 Delivery rate at 3 / 8 bar l/min: 80 / 120 Filtration fineness µm: 200 Machine dimensions: Length x width x height mm: see layout plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Stav: použitý, Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 124, Cena na požiadanie Giodpfx Aowl An Ieftol Použitý CNC vertikálny sústruh Výrobca: MORI SEIKI Typ: VL 55 Rok výroby: 2001 S CNC riadením MSC 518, 12-polohovým revolverom a dopravníkom triesok Dĺžka sústruženia: 653 mm Priemer sústruženia: 550 mm Os X: 350 mm Os Z: 660 mm Otáčky: až 2000 ot./min. Výkon vretena: 30 kW Hmotnosť cca: 12,5 t

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 1 500 mm, zdvih osi Y: 700 mm, zdvih osi Z: 610 mm, menovitý (zdanlivý) výkon: 37 kVA, krútiaci moment: 236 Nm, výrobca ovládačov: Heidenhain iTNC530, model regulátora: iTNC530, šírka stola: 700 mm, dĺžka stola: 1 700 mm, zaťaženie stola: 700 kg, otáčky (max.): 12 000 ot./min, celková hmotnosť: 9 000 kg, maximálna rýchlosť vretena: 12 000 ot./min, prevádzkové hodiny vretena: 16 580 h, výkon motora vretena: 37 W, počet vretien: 1, počet pozícií v zásobníku nástrojov: 48, Výbava: dokumentácia / manuál, dopravník triesok, 3-osové CNC obrábacie centrum Heidenhain iTNC530 Pojezd v osi X: 1500 mm Pojezd v osi Y: 700 mm Pojezd v osi Z: 610 mm Rozmery stola: 1700x700 mm Gsdpfxevz Tyus Aftjil Držiak nástrojov: SK40 Zásobník na 48 nástrojov Rýchloposuv: 36 m/min Nosnosť stola: 700 kg Chladenie cez vreteno: 20 bar Dopravník triesok Ručné koliesko

Stav: dobrý (použitý), Rok výroby: 2004, Comm. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 operator panel - Oil circulation lubrication Technical Data Pressing force max.: 500 kN Strokes per minute: 30 to 900 min⁻¹ Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Upright gap: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Godpfxoip Uqme Aftjil Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roll feeder VAMCO SP 150 Year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm

Stav: použitý, Technické detaily: Maximálny zdvih berana: 250 mm Maximálny priemer obrobku: 80 mm Maximálna dĺžka obrobku: 900 mm Celkový príkon: 1,5 kW Gisdpfsw Au I Isx Aftjl Hmotnosť stroja cca: 2,1 t rôzne príslušenstvo

Stav: dobrý (použitý), Rok výroby: 2014, 900 mm točný priemer, 650 mm maximálny obrábací priemer, 992 mm maximálna dĺžka sústruženia, vreteno 1000 ot./min, vrtanie vretena 275 mm, revolverová hlava s 10 pozíciami, vretenový motor 45 kW, Godewwtrbjpfx Aftsil riadenie FANUC Series 32i, 3-čeľusťové hydraulické skľučovadlo, koník, dopravník triesok, chladiace zariadenie,

Stav: veľmi dobrý (použitý), Rok výroby: 2012, Technical specifications: Giedpfxowl U Rhj Aftol Working length: 4300 mm Distance between uprights: 3230 mm Pressing force: 400 t CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat depth: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tonnes Condition: Very good condition, around 30,000 operating hours The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, Vertical Machining Center / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and in operation by appointment. Well-maintained, very well-preserved, fully functional condition. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and tailstock (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/Axis drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input resolution: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69871-A: SK40 - Tool clamping force: 12,000 N Tool magazine/changer: - Tool change system: Pick-up - Number of magazine positions: 24 stations - Max. tool Ø with adjacent spaces free: 80/140 mm - Max. tool length: 300 mm Gijdov Nxbyspfx Aftel - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. loading weight for the tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (built-up weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and tailstock (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness or accuracy of technical data and equipment. - Subject to prior sale -

Stav: dobrý (použitý), Rok výroby: 2003, Hlavné vreteno: Rozsah otáčok hlavného vretena: max. 6 000 ot./min Výkon pohonu hlavného vretena: 16 kW Maximálny krútiaci moment: 155 Nm C-os: 360° Revolverová hlava: Počet pozícií náradia: 12 pozícií Gisdpfev Drigjx Aftol Počet poháňaných staníc: 12 pozícií Rozsah otáčok poháňaných nástrojov: max. 5 000 ot./min Výkon pohonu poháňaných nástrojov: 10 kW Upnutie nástroja: (VDI 30) Driek nástroja: 20 x 20 mm Pohybové osy: X-os: 160 mm Z-os: 450 mm Posuvy: Rýchloposuv X: 60 m/min Rýchloposuv Z: 45 m/min Posuvová sila X: 2,5 kN Posuvová sila Z: 4 kN Rýchloposuv C: 200 ot./min Maximálny krútiaci moment C: 155 Nm Celkový príkon Hmotnosť stroja cca: 3,7 t Potrebný priestor cca: 4,5 x 2,5 x 2,5 m Ovládanie Heidenhain Dutý upínací valec C-os a pohon nástroja Dopravník triesok Odlučovač olejovej a emulznej hmly s elektrostatickým filtrom