Infračervená vytvrdzovacia pec pre filmové kompozity

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.lnfraBioTech GmbH
Item No. 3200 0088

Technical Data
Condition: as new; lightly used for test series
Functionality: fully functional
Year of construction: 2018
Connected load: 58 kW
Cooling capacity, water connection (on-site): 30 kW
Conveyor length: 7,000 mm
Conveyor width: 310 mm
Infeed height: 55 mm
Infeed width: 308 mm

TECHNICAL DETAILS
Application: Continuous furnace for curing in film lamination technology
Component temperature: max. 100°C
Stainless steel housing (L x W x H): 7,300 x 1,100 x 1,680 mm
Total height without control cabinet: 2,000 mm
Control cabinet (W x D x H): 1,200 x 600 x 2,100 mm
Base frame made of stainless steel profile tubing, height adjustable: ± 30 mm

Conveyor System
Vacuum conveyor belt made of silicone, 310 mm wide
Transport speed: max. 5 m/min
Conveyor belt height: 950 mm ± 30 mm
Infeed/outfeed openings (W x H): 308 x 35 mm
Clear area, infeed: approx. 750 mm
Clear area, outfeed: approx. 750 mm

Conveyor Operation:
Continuous operation, adjustable up to max. 5 m/min,
Straight running alignment via guide rollers, with light barrier safety at infeed and outfeed. Loading and unloading are performed manually.

Intended Use
The curing oven is a conveyor system for continuous operation with a feed speed of max. 5 m/min. There is an open area at the infeed and outfeed for loading and unloading components. The enclosed heating section with 6 IR modules (height-adjustable) lies in between. The component temperature is max. 100°C and is used to heat solvent-free adhesive between film composites. The return section of the belt, the rear of the IR modules, and the space above the heating modules are water-cooled. Components are held on the conveyor belt via vacuum suction. The control cabinet is installed separately from the machine outside the cleanroom.

The system operates in a cleanroom in accordance with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is designed exclusively for heating film composites.

Equipment
- 6 adjustable infrared heating modules, each with 6 infrared emitters
- 6 pyrometers for precise temperature control
- PU conveyor belt for efficient material flow
Kodpfewnm Ukox Afzond
- Integrated control and regulation system
- Height-adjustable stainless steel base frame
- Vacuum conveyor belt
- Cooling water distribution in the base frame (G1")
- Water cooling for belt return and rear of IR modules
- Mechanically interlocked service doors
- Operator panel mounted on the left at the infeed
- Control cabinet cooling unit, water connection (on-site)

History
This oven was designed for use in a cleanroom environment and was only in operation for a limited number of test runs. The oven was used for curing solvent-free adhesives between film composites.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.