IMA ADVANTAGE 310

IMA ADVANTAGE 310

This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped to handle various materials, including chipboard and MDF, with melamine, paper, foil, or veneer edging. The equipment includes a gluing unit, a cutting unit, and a buffing unit to enhance the finishing process. Take advantage of the opportunity to purchase this IMA Advantage 310 edge bander. Contact us for further information on this machine.

Machine Advantages

Technical Machine Advantages

• Minimum workpiece length: 150 mm
• Minimum workpiece width: 65 mm (for a maximum thickness of 25 mm), 150 mm
• Workpiece thickness: min. 8 mm, 12 mm with profile scraping knives; max. 40 mm (mfa 08346), 60 mm (skf)
• Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm
• Machining allowance per edge: 0 - 5 mm
• Workpiece shape: rectangular
• Material: chipboard, MDF
• Surface material: direct coating (melamine paper), paper, foil, veneer

Additional Information

Edging Material
Roll Material without foil:
Paper and plastic edging: 0.3 - 3.0 mm
Veneer edging: 0.5 - 3.0 mm
Max. edge cross-section: 150 - 180 mm²
Pre-cut edge strips:
Solid strips: 3.0 - 8.0 mm
Max. strip cross-section: 520 mm²
Edge height: min. 12 mm, max. 65 mm
Max. upper edge overhang: 2 mm
Edge profiles:
Paper edge: approx. 0.4 mm, 15° bevel
Plastic edge up to 3.0 mm, depending on radius tool
Flush-milled strips up to 8 mm

Machine
Nodox U U Dtepfx Af Rjcl
Constant workpiece overhang from the chain track: 35 mm + edge thickness
Max. cutting cross-section: 520 mm²
Passage width: min. 65 mm (at 35 mm overhang)
Min. workpiece length in feed direction: 150 mm
Base height (top edge of chain track): 940 mm
Unit side: left in feed direction
Pneumatic connection: approx. 7 - 8 bar
Jointing unit 08.379 and air nozzle
2 motors, each 4 kW, 9000 rpm
Gluing unit 283.1513
Glue tank 0.8 l, 60 mm high
Suitable for hot-melt or PU adhesive
With single-roll/strip magazine, roll diameter 800 mm
3 primary pressure rollers and 3 hold-down rollers
Cutting unit 08.415
Pneumatically pivotable to 0° or 8°
2 motors, 12,000 rpm
2 HM saw blades
Profile trimming unit SKF-L
4 motors, 12,000 rpm
Profile length in feed direction: max. approx. 50 mm
Workpiece thickness: max. 60 mm
Working speed: max. approx. 20 m/min
Distance between 2 workpieces: min. approx. 400 mm
Profile pull scraper 08.519
For secondary scraping of upper and lower quarter-round profiles
Self-tracing pull scraper unit 08.521
For removing residual hot-melt adhesive from the edge area of the top and bottom of workpieces
Buffing unit 08.617-2
Upper and lower motors: 180 W, 1400 rpm
2 polishing wheels 50 x 160 x 19 mm

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.