Dokončovacia kefa brúsky

Jakob Löwer Inh. Löwer mm lz32 bb150

Stav: použitý, Thread Rolling Machine - ORT RP18 2-Roll Thread Rolling Machine Giodpfx Abot Apugexor Shaft diameter: 69.95 mm See video The machine is located at our warehouse in Gussago (BS), powered and under electricity. Test run possible. Mimu Machine Tools Thread rolling is a mechanical, chipless process which can be performed cold or hot. Its purpose is to improve surface finish (and therefore fatigue resistance).

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, číslo stroja/vozidla: CDE:D09C236, CORIS /HERMES 9600 plniaca linka na fľaštičky a čistička fliaš, vyrobená vo Francúzsku. Skladá sa z: - stroja na vyfukovanie fliaš s dvoma formátmi (60 ml a 30 ml), - plniaceho stroja HERMES 2009 s dvoma hnacími krúžkami, 10 miest, - dávkovača viečok, - laminárneho prúdenia, - náhradných dielov, - pásového dopravníka 2200 mm x 40 mm, Gsdpfx Abertnlaoxeir predáva sa bez peristaltického čerpadla. Rok výroby 2010 VÝBORNÝ STAV

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, Löser centerless tube grinding machine – belt grinding machine – centerless tube polishing machine – cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and underwent a complete overhaul in 2012. During the overhaul, it was converted for polishing operations and has since polished approximately 10,000 parts. Afterward, the machine was no longer used. As part of the overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing tasks. Gsdpfjpugwiox Abxsir A wastewater treatment system including pumps is not currently installed. We can retrofit this upon customer request. The transport systems (roller conveyors) between the grinding stations also need to be adapted to suit your workpieces and can be retrofitted as well. The machine can process tube diameters from 10 mm up to 160 mm. The grinding/polishing motors deliver 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Stav: veľmi dobrý (použitý), Rok výroby: 2004, prevádzkové hodiny: 18 990 620 h, Funkcionalita: plne funkčný, šírka papiera (max.): 520 mm, maximálna výška papiera: 360 mm, typ vstupného prúdu: trojfázový, Výbava: dokumentácia / manuál, Heidelberg Printmaster 52-2 S vybavením: - Oboustranný tisk (1+1) - Konzole - Chladicí jednotka - 19 000 000 tiskových otisků - Rok výroby 2004 Giodpfewa Ulzsx Abxjr

Stav: nový, Rok výroby: 2023, Funkcionalita: plne funkčný, číslo stroja/vozidla: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Max. spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool mounting system Incl. chamfering unit Separate motor for each spindle Electronic feed, incl. brake, steplessly adjustable from 5 to 40 m/min. Durofer pointed-tooth feed rollers Godpfx Aberq Ebfjxsir Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set WEINIG MEMORY PLUS-SYSTEM control CE mark Declaration of conformity

Stav: nový, Rok výroby: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 3rd unit, brush: Scotch-Brite Hard / diameter 220 mm, variable drive 4th unit, brush: Scotch-Brite Hard / diameter 220 mm, variable drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Gijdpfxoug Ty He Abxjr Machine length: Machine width: Weight:

Stav: použitý, číslo stroja/vozidla: 008381, Pracovný rozsah os X: 4250 mm Godpsx Swc Hsfx Abxjir Pracovný rozsah os Y: 2280 mm Pracovná plocha: nestingový stôl Výkon hlavného vretena: 12 kW Počet riadených osí: 5 osí Počet vrtacích vretien: 11 Počet pozícií na nástroje: 24

Stav: dobrý (použitý), Rok výroby: 1992, Single-piece wood sanding machine Sanding from above and below Electric height adjustment with digital display Steplessly adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finishing brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Minimum workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller table L = 1600 mm, non-driven Note on used machines: Gisdpfx Aowyda Usbxsr • Errors in technical specifications and prior sale excepted. • Prices stated are ex location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty. The buyer is free to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stav: použitý, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport Godpfjvu Hgbsx Abxeir - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: použitý, Rok výroby: 2014, Použitý stroj Rok výroby: 2014 Vybavenie a technické údaje: - Pracovná oblasť X: 3 740 mm - Pracovná oblasť Y: 1 570 mm - Pracovná oblasť Z: 350 mm - 4. os: prítomná - 5. os: 5-osé vreteno, motor 12 kW - s dodatočným uzamykaním osi C - Počet miest na výmenu nástrojov: 24 s tanierovým meničom; 10 na ľavej strane stroja - Vertikálne vŕtacie vretená: 12 - Stôl stroja: konzolový stôl - Automatické polohovanie stola: prítomné - 6 opôr na obrobky typ e-motion - Špeciálny aretačný systém pre rámy - Softvér: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 pracovné polia pre kyvadlovú prevádzku - s automatickým centrálnym mazacím systémom - s mobilným ovládacím panelom a PC monitorom - s klimatizáciou pre riadiacu skriňu - s vákuovou pumpou 90 m³/h - s ručným ovládačom - Vrátane: 12 rámových upínačov, 8 veľkých a 4 stredné prísavky Gisdjx Hllxjpfx Abxer Dostupnosť: okamžite Miesto: Röllbach