Jowat lepidlo EVA hotmelt

JOWATHERM JOWAT 280.30/ 280.31

EVA Hotmelt ohne Füllstoff 280.30/31

Application Examples:
Edge Bonding
Suitable for bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with/without fleece lamination), and solid wood edging.
In principle, the bonding characteristics and the substrates’ surfaces to be bonded (including rear-side primers or other surface pre-treatments) must be evaluated for suitability prior to use.

Processing Instructions:
Automatic feed systems can be used to process the adhesive granules. Ensure that the ambient temperature does not exceed 30°C.
Different types of hotmelt adhesives may be incompatible with each other depending on the formulation. Therefore, we recommend thoroughly cleaning the application equipment when switching products. Additional information is available upon request.
Processing properties may vary depending on the application technology used and with different feed speeds, potentially affecting the bonding process.
Customer trials are required!

Typical Technical Data:
Processing temperature [°C]: 180 – 200
Feed speed [m/min]: 10 – 40
Appearance: final digit 0 = yellow, opaque; final digit 1 = white
Density at 20°C [g/cm³]: approx. 1.03 ± 0.03
Softening range [°C]: approx. 90 ± 5 (Kofler heating bench)
Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000
Heat resistance [°C]: approx. 80 ± 5
Open time at 190°C [s]*: approx. 6 ± 2
Setting time: not applicable
* measured on a 200 μm film
Kwedjx Sqnvspfx Af Rst
Technical data determined according to Jowat testing methods

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.