Odvíjač pásov Odvíjacia haspľa Odvíjač

Julius

Stav: dobrý (použitý), Maximálna šírka: 1300 mm Rjdoflvf Aepfx Ab Doch Počet valcov: 5 So strihacími nožnicami

Rok výroby: 1985, stav: dielensky repasované (použité), Technické údaje: Rozsah priemeru drôtu: 4–12 mm Gscxckebw Odkladací stôl (run out table): 4 m Rodpfxeh In The Ab Dsch Rýchlosť: 80 m/min Rekonštrukcia: 2022

Stav: pripravené na použitie (použité), Dobrý stav Maximálna šírka: 1300 mm Maximálny priemer: 1200 mm Rcjdpfx Ajflvfvob Doh

Stav: použitý, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range mm Total power requirement: 1 + 4 kW Machine weight approx. 1.8 t Space requirement approx. ... m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Rcedpfx Aofn Aqmsb Deh Non-braked decoiler with pressure roller Straightening machine MR 250/4: Strip infeed height: 1250 mm The system has been dismantled, inspected, and newly painted.

Stav: veľmi dobrý (použitý), Bodová zváracia stroj s jednoduchým zdvihovým valcom a prírubovými držiakmi elektród hore a dole. Značka DALEX, typ PMS 14-3. Výložník: 350 mm. Menovitý výkon pri 50 % ED: 80 kVA. Sekundárny skratový prúd: 54,5 kA. Sekundárne napätie naprázdno: 7-14 V. Sila elektród: 80-1.200 daN. Vybavené: 8-stupňovým prepínačom, hlavným vypínačom, prídavnou riadiacou skriňou HARMS+WENDE, synchronizačným zváracím riadením MPS 200, 8 zváracích programov, typovým štítkom AEG. Spustenie cez nožný pedál. Rcsdetuwz Ijpfx Ab Dsh

Stav: veľmi dobrý (použitý), Gear motor, electric motor, geared electric motor, helical gear motor - Condition: unused - Manufacturer: SEW-Eurodrive, helical gear motor - Model: RF97 DRN132S4/TF i 27.58 - Speed: 53 rpm - Power: 5.5 kW - Shaft: Ø 60 x 90 mm - Protection class: IP54 - Quantity: 2 units available - Price: per unit - Dimensions: 860/350/H410 mm Rcjdpfst Uluysx Ab Doh - Weight: 170 kg/unit

Stav: použitý, Strip Processing Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Premium equipment and feeding aids Space requirement for complete system (L x W): approx. 7,000 x 3,000 mm Weight of complete system: approx. 11 tons Condition: Good Straightening Machine HMS Type RS 47-04/1, Serial No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min. Number of straightening rollers: 7 pieces Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pieces Pinch roller diameter: Ø 80 mm Entry/Throughput height: 1,500 mm - Straightening rollers hardened, ground, and hard chrome-plated, with central support - Pinch rollers hardened, ground, and hard chrome-plated, with hydraulic ventilation - Manual roller gap adjustment - Feeding aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable lateral strip guide - All straightening rollers driven via distributor gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via gear motors - Straightener opening lift 250 mm for cleaning or for processing thicker material, lifting movement via trapezoidal screw spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Serial No. Coil weight: max. 8,000 kg Outer coil diameter: max. 1,600 mm (with loading carriage) Outer coil diameter: max. 2,000 mm (without loading carriage) Turntable diameter: Ø 1,700 mm Coil inside diameter, clamping range: 460–520 mm Coil width, nominal: max. 630 mm Spreader segment width: 750 mm Height of decoiler head above floor plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head, type TWINFLEX - Hydraulic expansion of decoiler head, central via wedge-slide system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lift capacity and 300 mm stroke - Decoiler on elevated base frame with motor-driven cross-travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic power unit, adjacent Tank capacity: 350 liters Rcjdpfeif Sg Sox Ab Doh Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Switchgear cabinet, adjacent - All cable connections with Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, celková hmotnosť: 3 200 kg, priemer vretena: 6 995 mm, typ vstupného prúdu: trojfázový, priemer valca: 210 mm, maximálna rýchlosť vretena: 20 ot./min, otáčky vretena (min.): 60 ot./min, celková výška: 1 900 mm, celková dĺžka: 2 700 mm, celková šírka: 1 600 mm, šírka valca: 175 mm, rok poslednej generálnej opravy: 2026, dĺžka záruky: 12 mesiace, Výbava: dokumentácia / manuál, Thread rolling machine - ORT RP18 2-roll thread rolling machine Refurbished - new Siemens PLC See video The machine is located in our warehouse in Gussago (BS), under power Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed either cold or hot, with the aim of improving the surface finish (and thus the fatigue strength). Rcjdpfovxa Dbjx Ab Deh

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, dĺžka brúsenia: 340 mm, šírka brúsenia: 170 mm, celková výška: 730 mm, celková dĺžka: 930 mm, celková šírka: 780 mm, The G115 surface grinder is a compact grinding machine designed for processing the periphery or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. The machine is ideal for small businesses, maintenance workshops, home workshops, laboratories, teaching demonstrations, etc. TECHNICAL DATA Maximum cutting depth: not greater than 0.03 mm Maximum peripheral speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm Worktable T-slot: 1-12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical handwheel feed increment: 0.025 mm Rodpexb Uq Dsfx Ab Dech Cross handwheel feed increment: 0.02 mm Net weight / Gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Package dimensions: 1100×760×860 mm The worktable can be moved forwards/backwards and left/right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. Grinding head runs smoothly. Compact design and low noise emission. Work enclosure available separately. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the lever. If you require any special accessories to increase working efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial runout of the taper hole axis is 0.01~0.02 mm at a distance of 100 mm.

Stav: použitý, Rok výroby: 1987, Funkcionalita: plne funkčný, dĺžka stola: 950 mm, šírka stola: 910 mm, lisovacia sila: 80 t, celková hmotnosť: 16 500 kg, dierovacia sila: 80 t, Max. pressing force: 80 tonnes / 800 kN Number of strokes: Max.: 1,000 rpm Min.: 100 rpm Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Clamping surface (table): L–R: 950 mm F–B: 910 mm Clamping surface (ram): L–R: 760 mm F–B: 510 mm Rcsdpfx Abjxzr Rus Doh Max. tool width (L–R): 970 mm Strip feeding height: Max.: 160 mm Min.: 70 mm Strip feeder (left) Bruderer BBV 202/120 Max. strip width: 202 mm Feed length: 0–120 mm Table opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2,834 mm Width: 1,742 mm Height: 3,460 mm Total weight with 1× BBV 202: approx. 17,500 kg Control cabinet dimensions: Length: 1,200 mm Width: 500 mm Height: 1,025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer but can be purchased separately. Our offer also includes a large selection of Bruderer, Schaal, Mabu, and Bihler presses, as well as decoilers and strip straighteners available from stock.