Otvorený náves s plachtou

KÖGEL 3-Achs-Cargo-Coil-Pritschensattelanhänger

You will find our complete vehicle stock of immediately and short-term available vehicles on our website.

Excerpt from the equipment. Full equipment details upon request.

Chassis
* Coil trough, length inside approx. 9,000 mm (shape according to VDI guideline 2700), for accommodating coils with a minimum diameter of 900 mm and a maximum diameter of 2,100 mm

Running Gear
* Axle lift mechanism on axle 1
* Three-axle SAF INTRADISC unit with disc brakes, Ø approx. 430 mm, ET 120
* Air suspension with approx. 180 mm travel
* Tyres I 6 x 385/65 R 22.5, 160J – brand of our choice
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)
* Brake/air suspension system
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS connection ISO 7638 (without connecting cables)
* Spring-actuated parking brake, external pneumatic connections, and external EBS diagnostic connection via ISO 7638 plug
* WABCO EBS system
* Air suspension system incl. 1 raise/lower valve, mounted on the left in driving direction behind the axle group
Prodpfx Afexvgqlepsd
* Driving position automatically resets

Floor
* Mounted execution on both sides
* Pallet stop strips made from steel with VarioFix hole pattern (bolted), left and right in driving direction, for width inside approx. 2,468 mm (loading height inside under external beam is reduced by approx. 20 mm)
* Floor approx. 30 mm thick, plywood, multiple bonded, cut-out in coil well area
* Coil well sidewalls clad with plywood panels approx. 18 mm thick
* Circumferentially sealed floor
* Full wooden coil trough cover, panel floor approx. 27 mm thick

* Stake pockets for square plug-in stanchions approx. 80 x 80 mm
* Arrangement as per drawing A2:
* 2 pairs on the longitudinal beam at positions 1 and 2
* 8 pairs on the outer frame

* 8 pairs of stake pockets in the coil trough for square plug-in stanchions approx. 80 x 80 mm
* Arrangement: 1st pair at the front start of the trough
* 2nd–7th pairs as per series drawing
* 8th pair at the end of the trough

Body
* Body strength compliant with EN 12642 XL (VDI 2700)
* Certified for a payload of approx. 27,000 kg
* Front wall at body height with aluminium corner stanchions
* Riveted aluminium hollow profiles, bolted/riveted to frame
* 1 pair of lashing rings according to EN 12640
* Inside of the front wall reinforced with approx. 12 mm plywood with phenolic resin surface, approx. 1,250 mm high
* Double-wing rear portal door made of aluminium, approx. 2,630 mm internal height
* 4 integrated locking bars (2 left, 2 right)
* Bolted rear corner stanchions made of steel at portal height with additional impact protection up to the first door hinge
* Corner stanchions on both sides can be mechanically swung out sideways by approx. 500 mm for loading/unloading
* Operation requires sliding the roof forward and opening the rear doors
* 5 pairs of mounting slots for load securing on the rear corner stanchions
Side wall
* 3 pairs of KÖGEL sliding stanchions with approx. 600 mm high pockets for stacking up to 5 drop-in slats above floor; fixed to the outer frame
* 5 rows of slat holders consisting of plug-in pockets on the sliding stanchions and variable supports on the corner stanchions
* Variable support as spacer for drop-in slats (16 pieces), located in the slat depot of the sliding and corner stanchions (height approx. 100 mm above floor)
* 4 rows of V-aluminium drop-in slats on the sides
* VarioFix steel perforated outer frame with 3 pairs of stanchion holders
* 2 additional pairs

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.