Horizontálna pásová píla

Kaltenbach KBS 750 DG

Kaltenbach KBS750 DG Bandsaw Line with T14 Transport System

Kaltenbach KBS 750 Double Miter Horizontal Bandsaw with LS270 NC Length Stop and T14 Transport System, steel trade specification – operation and programming are performed at the control panel.

This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful band saw, ideally suited for cutting structural steel profiles such as horizontal H-beams, L- and U-sections, flat material, and rectangular tubing.

Semi-automatic twin-column bandsaw for cutting profiles up to 16 m in length, featuring a double miter swivel device.

Technical Data

Cutting capacity at 90°: 750 mm × 500 mm

+70°: 730 × 500 mm
–70°: 710 × 500 mm
+60°: 670 × 500 mm
–60°: 650 × 500 mm
+45°: 550 × 500 mm
–45°: 520 × 500 mm
+40°: 500 × 500 mm
+30°: 390 × 500 mm

Min. profile cross-section: 10 × 10 mm
Saw blade dimensions: 6990 × 41 × 1.3 mm, Type Bimetal M42, Z3/4
Drive power: Saw with frequency control: 5.5 kW
Hydraulic unit (4.9 l/min): 1.5 kW
Cutting speed: 15–100 m/min, infinitely adjustable from the control panel
Feed rate: Working feed: 0–300 mm/min
Rapid approach and return: 2500 mm/min
Working height: 640 mm
Compressed air connection: 6–8 bar
Air consumption: 500 NL/min (according to DIN 1342)
Saw weight: approx. 3200 kg
Saw dimensions: 3230 × 1160 × 2420 mm
Electrical: conforms to EN 60204-1
Power connection: 3 phases + N + PE / 50 Hz
Power consumption: 17 kVA
Fuse protection: 35 A

Machine equipment Kaltenbach KBS 750 DG

Very robust twin-column guide for maximum precision
Angled saw bow for higher performance and accuracy
Automatic table lowering during material feed
Infinitely variable speed control via frequency inverter
Hydraulic saw feed, adjustable manually
NC-controlled miter angle adjustment with absolute encoder
Automatic cycle: clamping – cutting – unclamping
Nedpfxsy Rimue An Uswh
Horizontal clamping device:
Fixed front stop, opposite clamping jaw via hydraulic cylinder
Manually adjustable pressure reduction
Vertical clamping device:
Directly beside the band; pressure manually adjustable
Play-free linear guides
Automatic adjustment of the blade guides
Automatic cutting pressure control
Remote diagnosis possible (telephone connection required from customer side)
Hydraulic blade tensioning with electronic monitoring
Automatic blade relaxation when at standstill
Automatic stop in case of blade breakage
Micro-spray system for clean operation and long tool life
Integrated chip container
Separately driven chip brush
Electronic slip monitoring
Hydraulic system heating

Inzerát bol automaticky preložený. Chyby v preklade sú možné.