Stroje na ozubenie Karl Klink RW 10 1963

Karl Klink RW 10

Rok výroby: 1951, stav: dobrý (použitý), číslo stroja/vozidla: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine no.: 1133 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Broaching stroke: 1,500 mm Broaching positions: 1 piece Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Through hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Lrodsdcdrpopfx Afgok Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant / cutting fluid system • The machine features an oil and chip tray with a tool feed carriage Remarks: The machine is ideal for manufacturing keyways and profiles. The machine runs smoothly and is clean in the guidance and cylinder areas. Broaching needles and broaching mandrels can be supplied upon request. The machine is available for inspection, powered, and ready for demonstration at our warehouse.

Stav: použitý, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Maximum pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS Ledpfeuhbv Sox Afgjrk - Footprint: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE OPERATING HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct path measuring systems - Synchronized tapping - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * with enclosure washing - Chip conveyor: Rear - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Stav: pripravené na použitie (použité), Rok výroby: 1998, celková hmotnosť: 2 900 kg, výkon: 8 kW (10,88 k), vstupné napätie: 380 V, počet broachovacích poloh: 1, celková šírka: 6 100 mm, celková výška: 1 900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in ready-to-use condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm width Through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Lrodpfx Aextcz Ijfgjk Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / Rated power: 380V 50Hz / 8.0 kW Accessories / Special features: • Machine features manual-hydraulic control for broaching stroke movement • Integrated coolant and cutting fluid system • Simple, external oil drip tray on the machine bed, without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching needles as well as broaching mandrels and pull heads can be supplied.

Stav: použitý, Wheel diameter – max. 180 mm Wheel width: 45 mm Module – max. 4 Module – min. 0.5 Stroke length max.: 0 – 52 mm Spindle mount (internal): MK 4 Table diameter: 160 mm Table bore diameter: 75 mm Strokes per minute: 355 – 630 spm Feed range: 0.008 – 0.4 mm/stroke Space requirement: approx. 2.30 x 1.50 x 2.36 m Drive power: 6 kW Machine weight: approx. 2,500 kg With rack shaper attachment Lrjdpfjtycg Sjx Afgsk Change gear set Year of manufacture: approx. 1981

Stav: pripravené na použitie (použité), Rok výroby: 2020, prevádzkové hodiny: 11 574 h, pojazdová vzdialenosť osi X: 1 525 mm, zdvih osi Y: 762 mm, zdvih osi Z: 625 mm, celková výška: 3 235 mm, celková hmotnosť: 13 500 kg, maximálna dĺžka produktu: 5 000 mm, Toto 3-osé vertikálne obrábacie centrum DOOSAN MYNX 7500 II bolo vyrobené v roku 2020 a je vybavené riadiacim systémom Heidenhain TNC 620 a meracím dotykovým snímačom TS 460. Stôl má rozmer 1600 mm x 750 mm a maximálne otáčky vretena sú 12 000 ot/min. Pri rozmeroch 5000 × 4050 × 3235 mm a hmotnosti 13 500 kg by ste nemali premeškať príležitosť na kúpu tohto vertikálneho obrábacieho centra DOOSAN MYNX 7500 II. Kontaktujte nás pre viac informácií. • Dĺžka stola: 1600 mm • Šírka stola: 750 mm • Kužeľ vretena: ISO 40 dvojitý kontakt Ljdox U Dtwopfx Afgerk • Maximálne otáčky vretena: 12 000 ot/min Rozmery Hĺbka stroja: 4050 mm

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Priemer brúsneho kotúča max. 110 mm Šírka brúsneho kotúča max. 15 mm Modul - max. 0,5 - 10 Uhol záberu 15 - 25° Otáčky 2800 ot./min Celkový príkon 0,4 kW Hmotnosť stroja cca 0,02 t Potrebný priestor cca 0,4 x 0,2 x 0,2 m Určené na profilovanie brúsnych šnekov (šnekových kotúčov) pre stroje na brúsenie bokov zubov. Profilovanie a opravné profilovanie možné na nasledujúcich modeloch: Lrodpevibc Hofx Afgok NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM, ... Registračná doska vpravo s mikrometrickým nastavovaním v osi (axiálne) Registračná doska vľavo s mikrometrickým nastavovaním v radiálnom smere 2 presné motorové vretená na upnutie diamantových kotúčov.

Stav: použitý, Rok výroby: 1997, Technické detaily: Modul - max.: 7 Hmotnosť stroja cca: 5 t Priemer brúsneho závitníka: 280-350 mm Šírka brúsneho závitníka: 84-104 mm Počet zubov - min.: 6 Počet zubov - max.: 600 Lodex Aq Egepfx Afgjrk Maximálny povolený priemer vonkajšieho kruhu: 360 mm Maximálna hmotnosť obrobku: 60 kg bez filtra s hydraulickým chladením oleja a spätným vedením brúsneho oleja

Stav: takmer ako nový (použitý), Gilotína na mrazené mäsové bloky 2 ks nožov na priečne rezanie 2 ks nožov na pozdĺžne rezanie Prierez bloku: 520 x 300 mm Teplota spracovania: > -25 °C Maximálny prietok: 5 000 kg/h Hydraulické zdvíhacie zariadenie Rozmery stroja v cm: Šírka: 110,0 Ljdeug Uqtjpfx Afgerk Dĺžka: 240,0 Výška: 190,0 Inštalovaný výkon: 6,0 kW Napätie: 400 V, 50 Hz

Rok výroby: 1965, stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Ljdstuuvzjpfx Afgork Broaching stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Acceptance in the pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Workpiece diameter: max. approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Oil capacity: Hydraulic approx. 450 L / Coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (without work area) Power supply: 380 Volt 50 Hz Connected load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine includes an integrated coolant and cutting fluid system • The machine is equipped with a manually operated tool feeder • The broaching slide with draw head mount is guided flat on both sides • The machine is fitted with adjustable pull force limitation • Pull force display Accessories: • 1 universal draw head for flat shanks up to max. approx. 40 mm width • Indexing device (see pictures) • Various special arbors and clamping devices • Machine documentation Remarks: The machine is designed for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and the robust broaching tool feeder, it is very well suited for heavy-duty profile broaching tools. The machine is used and in condition appropriate to its age. The machine is available for inspection at our warehouse. It is newly added to our stock and has not yet been refurbished technically or visually. Draw heads for profile broaching are available upon request, depending on DIN standard, dimension, and stock availability.

Stav: pripravené na použitie (použité), Rok výroby: 2008, Sústruh CNC Ernault Somua 1400x8000 CNC systém Fanuc 21i TB Maximálny sústružený priemer 1400 mm Maximálna dĺžka obrobku 8000 mm Maximálny priemer sústruženia nad priečnym suportom 1100 mm Ledpfxoyly Nbj Afgork Priemer vretena 235 mm Maximálna hmotnosť obrobku 25 000 kg Výkon motora 75 kW Video stroja v prevádzke k dispozícii!