Misa vibrátory

KAYAKOCVIB KVM 220

Stav: použitý, Rok výroby: 2013, Technical Details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm Control unit: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 positions Table size: 900 x 410 mm Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 DC V Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Fjdpfx Acjvhbpdoxopd Cooler dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions approx. LxWxH: 1.9 x 2.3 x 2.45 m TNC620 (contouring control with up to 5 controlled axes, especially suitable for universal milling), network integration possible Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal cooling unit on the control cabinet Work area interior lighting Handheld control device *

Stav: nový, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – AVAILABLE FOR VIEWING UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the top and bottom edges of metal parts from a minimum size of 150 mm up to 1100 mm in length IN A SINGLE PASS. The first station processes the products from below using two counter-rotating cross belts, while the second station processes the products from above, also using two counter-rotating cross belts. With these cross belts, both the inner and outer edges of the parts are rounded in one go. Sharp edges are removed from steel, stainless steel, and aluminum parts produced by laser, punching, or shearing processes. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is that the machine can also process small parts starting at 50 mm. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed and the gap in the first processing station is bridged, so that the parts go directly into the second processing station. This means small products from 50 mm up to 150 mm can be processed from one side only. A further benefit of this machine is its ability to round parts with a protective surface film without damaging the film. Simple, tool-free change of the cross belts. Program for automatic positioning of the upper and lower belts, for easy accessibility and reduced changeover times. Easy operation via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210 Fedpfxjd Ev Upe Acxopd

Stav: ako nová (výstavný stroj), Rok výroby: 2025, Ultrazvuková čistiaca linka ULTRA200 Využiteľné rozmery platformy: 850 x 450 mm max. využiteľná výška: 400 mm max. zaťažiteľnosť: 100 kg Objem: 380 litrov + 55 litrov (odlučovač oleja) Vyhrievanie: 2 x 4 kW Kompletne vyhotovené z nehrdzavejúcej ocele Tepelne a zvukovo izolované Vonkajšie rozmery cca: Dĺžka 1.500 x Šírka 950 x Výška 1.750 mm Riadiaca jednotka značka Fatek, HMI značka Weintek Celkový elektrický príkon: 10,55 kW vrátane: - automatického pneumatického zdvihu na tovar - povrchového oplachu/odlučovača oleja na údržbu kúpeľa - ultrazvukového ponorného meniča so zvukom z 2 strán - Výkon: 2.000 W efektívne / 4.000 W špičkové - Multifrekvencia: 20 kHz / 40 kHz - manuálnej ofukovacej pištole Fedsv U A Izopfx Acxspd Predvádzací stroj z technologického centra Glogar, okamžite k dispozícii

Stav: veľmi dobrý (použitý), Rok výroby: 1967, Vybavenie: Fsdpfol D N Hvsx Acxopd 1 čeľusťový podávač vpravo 1 excentrický lis 90 kN 2 úzke sane agregáty 3 bežné sane agregáty Pracovný rozsah: Rozsah priemeru drôtu: 0,5 - 3,5 mm Šírka pásky: max. 32 mm Dĺžka podávania: max. 170 mm Výkon: max. 250/min

Stav: nový, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 450 mm Cutting capacity at 90 degrees: rectangular 650x450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Required space approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-column double mitre bandsaw K-tech DG 62/45 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation due to angled cutting, feed regulator + cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (cleaning/disinfection) - Energy-efficient and low vibration due to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15–100 m/min - Hydraulic cutting pressure control valve Fedpfx Acod Iipmsxspd - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned drive wheels (520 mm) each - Easy-to-read mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material start, or cut directly for series cuts 4. Switch off saw blade 5. Raise frame just above material 6. Vice opens

Stav: veľmi dobrý (použitý), Rok výroby: 2015, Ovládanie Heidenhain TNC 620 V2 Posuvová dráha X/Y/Z: 760/480/480 mm Fpsdpfxov Rr Hxo Acxjd Otáčky: 12 000 ot./min. Zásobník nástrojov pre 24 nástrojov SK40 Veľkosť stola: 900 x 410 mm Dopravník triesok Automatizácia / robot

Stav: nový, zadný doraz: 750 mm, - Kapacita 1050 x 6 mm - NC elektrické zadní dorazy - Nožní spínač - Fotobuněčná ochrana zezadu - Opěrná ramena - Osvětlení linie řezu - Brzdový motor - Nouzové zastavení Fpodpfx Acegg N Hbsxsd - Dokumentace - Hmotnost 1800 kg - 400V

Stav: nový, POPIS DM100 Z2C - vykonáva zaoblovanie hrán a odstraňuje ostré otrepy na vnútorných aj vonkajších hranách oceľových, nerezových alebo hliníkových dielov po laserovom, strihacom alebo vysekávacom oddelení kovových dielcov od veľkosti 50 x 50 mm až do 1100 x 100 mm. Prvá stanica spracováva produkty pomocou kontaktného valca (cca 55° Shore) s brúsnym pásom a v prvom kroku odstraňuje silné otrepy. Fpsdpfjd Ixadsx Acxed Druhá stanica spracováva produkty pomocou dvoch vzájomne protibežných priečnych pásov zospodu aj zhora. Prostredníctvom priečnych pásov sú hrany opracovávaných dielov zaoblené z vnútornej aj vonkajšej strany. Veľkou výhodou je aj odstraňovanie otrepov z produktov s ochrannou fóliou povrchu, pretože sa opracovávajú iba hrany bez poškodenia fólie. Technické údaje – DM1100 Z2C: Pracovná kapacita (Ø mm): 1100x100 Počet pásových staníc (Z): 1 Počet priečnych pásových staníc: 2 Brúsny pás, rozmery (mm): 1100x2200 Rýchlosť brúsneho pásu (m/s): 8-22 Rýchlosť priečneho pásu (m/s): 2-8 Posuvná rýchlosť (m/s): 0,6-3,2 Motor brúsneho pásu na hlavu (kW): 18,5 Motor priečneho pásu (kW) (2x): 3 Motor posuvu (kW) (3x): 0,18 Celkový výkon (kW): 33 Spotreba prúdu (A): 62 Priemer odsávania na hlavu (Ø mm): 150+185 Rozmery (mm): 3600x2330x2350 Hmotnosť (kg): 5000

Rok výroby: 2000, stav: použitý, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Space requirement approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously maintained and calibrated by the manufacturer Y-axis as longitudinally traversing measuring portal: 1,600 mm X-axis as cross measuring slide: 1,000 mm Z-axis as vertical measuring quill approx.: 800 mm Max. workpiece weight/table load approx.: 2,250 kg Clearance under measuring portal approx.: 900/1000 mm Overall table size approx.: 2,600 x 1,250 mm Table height above floor approx.: 700 mm Table plate thickness: 380 mm Machine height approx.: 3,100 mm Weight approx.: 5,500 kg Special equipment/accessories: • Measuring table, crossbeam and quill made of dark natural granite, table with 6 x 9 threaded holes for fixing workpieces/fixtures • All axes are air bearing and therefore easy-moving and virtually wear-free, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC control unit type WPC 2040 / FW 31.351 installed in the workstation (control replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with probe model PH 10 M plus and probe TP 20 as well as various probe accessories Fpedpfst Hw Nyjx Acxsd • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also installed in the workstation • Automatic probe change possible, 6-position probe rack model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual movement of all 3 axes with continuously adjustable travel speeds • Certified balls for setup on the table, workstation, various clamping devices, etc. Condition: Very good – basically in stock under power for inspection, ready for demonstration, was dismantled by a coordinate measuring machine specialist at the previous owner and reassembled here. Delivery: Ex stock – in the condition as seen and inspected Payment: strictly net – upon receipt of invoice.

Rok výroby: 2009, stav: dielensky repasované (použité), číslo stroja/vozidla: FARO-PT08, Well-maintained Faro Platinum measuring arm with 7 axes Measuring arm length: 8ft (approx. 2.4m) Accuracy: 30 / 43µm Last calibration: 2012 Includes new Aberlink 3D software (free updates) Windows 10 HP notebook (used) Optionally available with Inca Premium software (+ €4,000) or other software packages (Polyworks, PcDmis, MCosmos, etc.) Measuring plate 1500x1000 available on request Fpedpfxslwktpe Acxed Software training available as required