4-valcové hydraulické stroje na valcovanie plechov

KK-Industries CY4R-HHS 300-20/20

Stav: nový, Pre-bending: 13.0 mm Sheet length: 3100 mm Sheet thickness: 16.0 mm Total power requirement: 17.5 kW Approximate weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Fedpfx Asd Auacjfmjft Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment in accordance with CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stav: nový, Rok výroby: 2024, dĺžka valca: 3 000 mm, max. hrúbka plechu: 90 mm, max. hrúbka oceľového plechu: 90 mm, max. hrúbka hliníkového plechu: 90 mm,

Rok výroby: 2003, Stav: pripravené na použitie (použité), Použitý bubnový sušič značky SAFEM, demontovaný z linky na bezlepkové produkty. Médium: para Návrhový tlak: 12 bar Maximální provozní tlak: 9,5 bar Ffedjq Nmuwjpfx Afmot Zkušební tlak: 24 bar Maximální provozní teplota: 192 °C Objem: 4,55 m³ Tlak x objem: 54,6 bar x m³

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 1989, priemer horného valca: 200 mm, priemer bočného valca: 150 mm, max. hrúbka plechu: 6 mm, pracovná dĺžka: 3 000 mm, Pracovná dĺžka 3000 mm Ohýbací výkon 6 mm Výkon pre predohybovanie 4 mm Priemer horného valca 200 mm Ffodsuzm Ayepfx Afmet Priemer bočných valcov 150 mm Hydraulické odklopné ložisko

Rok výroby: 2002, Stav: použitý, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power required 65 kW Machine weight approx. 7,500 kg Space requirement approx. m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing sanding machine Type 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Workpiece height max. approx. 1 – 50 mm Feed speed stepless approx. 1 – 10 m/min Comprising the following units: Fjdpfx Aet Hw Shefmeft 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt, Belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive non-woven abrasive available in various qualities, specially designed for deburring and cleaning surfaces, and for rounding radii on workpieces. Also suitable for workpieces with differing heights. Drive approx. 7.5 kW, disc oscillates via motor (2.2 kW) across the full belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Belt speed approx. 11 m/sec. with fine height adjustment and pneumatic oscillation in cross direction, various sanding belts. 5.) Wet configuration = complete coolant system, comprising band filter unit with integrated pump in machine base, rotary feedthrough at the top of the deburring disc spindle, water return via the vacuum table, as well as water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc., as well as workpiece pressure rollers front and back, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: Good – can be inspected under power Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stav: nový, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate weight: 2,400 kg Total power requirement: 4 kW Pre-bending: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Fsdpfx Aod Ab Haofmeft Roller diameter: 170 mm Equipment • 3 rollers • Asymmetrical roller configuration – with pre-bending • Top roller swings out to the front • Motorized left-right control • Cone rolling via inclined rear roller • Operation via foot pedal • Hardened rollers • Digital display Catalogue available at the following link:

Stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 804, dĺžka valca: 2 550 mm, pracovná šírka: 2 500 mm, max. hrúbka plechu: 16 mm, max. hrúbka oceľového plechu: 16 mm, celková hmotnosť: 12 500 kg, 3-Roll Plate Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and was only operated in single-shift work. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Ffjdpfx Asvxbm Refmjt Hydraulic adjustment of rolls Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a stair platform around the machine can be purchased.

Stav: nový, Dĺžka plechu: 3100 mm Ffjdpjd Ab H Eefx Afmet Hrúbka plechu: 10,0 mm Predohnutie: 8,0 mm Celkový príkon: 11,0 kW Hmotnosť cca: 9,7 t Rozmery (DxŠxV): 4,88 x 1,16 x 1,18 m Ilustrácia podobná Ohýbací výkon: 10,0 mm » pri 3x horný valec Ø Predohnutie: 8,0 mm » pri 1,5x horný valec Ø Priemer horného valca: 270 mm Priemer spodného valca: 250 mm Priemer bočných valcov: 220 mm Max. otvorenie: 50 mm Pracovná výška: 825 mm • plne hydraulický pohon horného a spodného valca cez planétovú prevodovku • digitálny ukazovateľ polohy bočných valcov • hydraulické sklápacie ložisko • zariadenie na ohýbanie kužeľov • kalené valce • hydraulické prisúvanie bočných valcov synchronizované cez PLC • hydraulické prisúvanie spodného valca cez torznú hriadeľ • tlakovo nastaviteľný spodný valec • elektrická a hydraulická ochrana proti preťaženiu • mobilný ovládací pult • prevádzkový manuál v NEMČINE a ANGLIČTINE • stroj a vybavenie zodpovedajúce CE normám Dôležité body pri kužeľovom ohýbaní: • max. hrúbka plechu je 50 % menovitého výkonu • dĺžka kužeľa môže byť max. 30 % alebo musí byť viac ako 60 % dĺžky valca • odporúčajú sa kalené valce

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 2009, Možnosti: ACB, BendGuard na manuálne ohýbanie, vyhotovenie HQ, rozhranie pre druhý stroj Fodpfx Aswykccjfmjft

Stav: dobrý (použitý), Rok výroby: 1996, Pipe diameter: 6 - 28 mm Wall thickness: 2 mm Bending radius min.: 2 x D Control: IPU 20 Bending radius max.: 5.0 x D mm Max. bending angle: 190° Mandrel length: 3000 mm Fodpfx Asvtgn Nsfmjft Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space required: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display at the operator panel for angle specification, angle detection, and angle measurement via absolute value rotary encoder, automatic tool plate return, rotation device with digital indicator, hydraulic quick chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, advance/retract, mandrel advance/retract, bend advance/retract, lock advance/retract, mandrel lubrication, rotation device advance/retract, tool plate return, length stop advance, emergency stop. The machine comes from prototype production and was only used sparingly until 2000. Afterwards, the machines in this division were sold. However, the purchaser did not use the tube bending machine, and since then it has only been stored and not operated (original paint). Machine offered at a special low price! This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.