Chladiaci stroj

KKT vboxX 18 (art.4067)

Stav: dobrý (použitý), Rok výroby: 1998, Pressing force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight Table - Ram (stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Hjdpfxev Rwu Ue Agmsni Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE norm With oil-hydraulic drive, control dependent on pressure/time and stroke length, front light barrier (Sick), Two-hand operation

Stav: použitý, Rok výroby: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table area: 1200 x 815 mm Table height above floor: 800 mm Hsdsvzxphopfx Agmjni Ram area: 1100 x 700 mm Down speed: from 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirements (LxWxH): approx. 2.4 x 2.8 x 4.0 m Approved for manual loading operations in accordance with CE standards with oil-hydraulic drive, pressure/time and stroke-dependent control, front light curtain (Sick), two-hand control operation

Stav: použitý, Single-column hydraulic press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 t Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table surface: 1000 x 500 mm Table bore: Ø 210 mm Ram plate area: 400 x 360 mm Clamping pin bore: Ø 40 mm Table height above floor: 855 mm Rapid traverse speed: 280 mm/sec Pressing speed: 3.5 mm/sec to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Power supply: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control system - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer Hsdpfx Agohrakvsmsni - Pressing force steplessly adjustable manually via pressure regulator - Short-stroke device - Mechanical tool clamping on the ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot control - Control prepared for electric tool monitoring - Hydraulic and electrical circuit diagrams available Required floor space (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 t In good condition

Rok výroby: 1998, stav: pripravené na použitie (použité), Pressing force: 1600 kN, installation height: 750 mm, max. ram stroke: 500 mm, clamping surface X/Y: 700 mm/600 mm, frame passage: 800 mm, side frame opening: approx. 450 mm. Distance between clamping plates to floor: 680 mm, ram bore diameter H7: 60 mm, rapid traverse down/up: 500/400 mm/s, max. working speed: 35 mm/s. Dimensions X/Y/Z: 2000 mm/1500 mm/3600 mm, weight: approx. 16,000 kg, control system: Panelware. Documentation available. On-site inspection is possible. Hedpsttbd Tofx Agmjni

Stav: generálne opravený (použitý), Rok výroby: 1995, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4290, celková výška: 2 750 mm, inštalačná výška: 500 mm, lisovacia sila: 30 t, šírka stola: 440 mm, dĺžka stola: 320 mm, zdvih: 300 mm, generálne opravený dvojstĺpový lis Schoen, rok výroby 1997/2024 Lisovacia sila: 300 kN Svetlosť medzi stolom a beranom: 500 mm Zdvih: 300 mm Hsdpfju Hyx Sex Agmsni Stôl (Š x H): 440 x 320 mm Stroj bude generálne opravený: - nová riadiaca jednotka - nová svetelná závora - repasovaná hydraulika

Stav: použitý, Rok výroby: 1991, Pressure 30 t Column gap 1200 mm Stroke 500 mm Table area 1200x1000 mm Ram area 600x400 mm Table height 850 mm Pin hole in ram Ø 40 mm Machine weight approx. 4 t Hnjdpfswt Durex Agmoi Space requirement approx. WxDxH 2400x2200x3400 mm BWS for protective and cycle operation Stroke and pressure shut-off