Sústruh (veľká vretenová diera)

KMS CS6266C/2000

Stav: dobrý (použitý), Rok výroby: 1992, Automatic band saw manufacturer: JAESPA, model: W400 AZ Control: Minipos 807, year of manufacture: 1992 Cutting diameter (round material): max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Gtsdpfogf H Saox Aftet Accessories: 2 x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder Gedpfsrtd Uwox Aftett - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: nový, Bernardo Universal Lathe Master 360 Pro Centre distance: 1000 mm Centre height: 180 mm Swing over bed: 360 mm Swing over gap*: 502 mm Swing over cross slide: 220 mm Bed width: 185 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Speed range (8 steps): 70 - 2000 rpm Longitudinal feed range (32 steps): 0.052 - 1.392 mm/rev Cross feed range (32 steps): 0.014 - 0.380 mm/rev Metric threads (26): 0.4 - 7.0 mm Inch threads (34): 4 - 56 TPI Quill diameter: 42 mm Quill travel: 100 mm Quill taper: MT 3 Motor output (S1 100%): 1.5 kW (400 V) Motor input (S6 40%): 2.2 kW (400 V) Machine dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable bed section length: 205 mm Scope of delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, to DIN 55029 Godpfxod I H Ize Aftjtt • Fixed steady rest – through-hole diam. max. 70 mm • Travelling steady rest – through-hole diam. max. 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 280 mm • Four-way tool holder • Safety cover for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine light • Reducing sleeve • Change gears • 2 dead centres • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE standard) • Machine base with drawers • Service tools

Stav: použitý, Rok výroby: 1955, Technické údaje: Maximálny priemer sústruženia nad lôžkom: 420 mm Gedpfxju Ix D Ae Aftott Maximálny priemer sústruženia nad suportom: 240 mm Maximálna dĺžka sústruženia: 1100 mm Maximálny priemer sústruženia v vybratí: 600 mm Rozsah otáčok: 24 - 900 ot./min, 8 stupňov Priemer vretenového otvoru: 41 mm Rozsah posuvu v smere X: 0,0120 - 0,1000 mm/ot. Rozsah posuvu v smere Y: 0,0062 - 0,0302 mm/ot. Upínanie pinoly koníka: MK 3 Posuv pinoly koníka: 220 mm Celkový príkon: cca 4,0 kW (bez záruky) Hmotnosť stroja: cca 1,2 t Rozmery stroja (D x Š x V): cca 2,3 x 0,9 x 1,3 m Výbava: 3-čeľusťové skľučovadlo Röhm Ø 200 mm 4-polohový držiak nástrojov, otočný o 30° vpravo/vľavo 2x upínacia drážka pre kopírovacie zariadenie Otočný hrot

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: Gsdethd Shepfx Aftjtt - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Rok výroby: 1988, Stav: použitý, Voest Alpine DA 160 sústruh, rok výroby 1988, s trojčeľusťovým skľučovadlom a systémom Multifix. Po dohode je možné predviesť v chode pod prúdom. Gtjdpfx Asma Snxsftot

Stav: veľmi dobrý (použitý), Bore diameter: 1.5 – 165 mm Stroke: 80 – 160 mm Gtedpowva Rnjfx Aftet Spindle speeds: 200 – 2500 rpm Stroke speed under load: 80 – 310 strokes/min Total power requirement: 0.9 kW Machine weight: approx. 0.6 t Space requirement: approx. 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measuring control Includes: Holders, small measuring table, digital dial gauge, tool accessories,

Stav: použitý, Rok výroby: 2003, x-travel: 930 mm Gtsdpfjt U Rm Iex Aftjt y-travel: 400 mm z-travel: 406 mm Spindle speed: 9-6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19 - 890 (x) mm/min Spindle taper: SK 40 Column overhang: 200 - 680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive via a frequency inverter "made in Germany" and digital 3-axis position display DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity achievable by tapered roller bearings, less than 0.01 mm runout measured at the quill. Automatic quill feed. Forward/reverse for thread cutting. X and Y axes with adjustable dovetail guides. Coolant system. Y-axis with flat guideways. Large Y-axis travel of 400 mm. Motorised table elevation with rapid traverse (Z-axis). Features: - Frequency inverter quality Made in EU - Drilling-milling head, tiltable ± 45°, overhang 200 - 680 mm - Spindle speeds infinitely variable, exceptionally wide speed range - Adjustable drilling depth stop with millimetre scale, readable from the front - Adjustable, large protective screen - Cross table: robust, large dimensions, precisely surface-ground - Motorised Z-axis table height adjustment - Adjustable end stops - OPTI control panel: Integrated control panel; integrated digital position display DPA 21 including spindle speed display - X-axis: Motorised table feed, infinitely variable feed adjustment, rapid traverse, forward/reverse Technical Data: - Length (Product): 1,500 mm - Width/Depth (Product): 1,450 mm - Height (Product): 2,200 mm - Net weight: 1,150 kg - Total connected load: 4 kW - Electrical voltage: 400 V - Phases: 3-phase AC - Mains frequency: 50 Hz - Max. face mill diameter: 100 mm - Max. end mill diameter: 20 mm - Vertical spindle overhang: 200 - 680 mm - Vertical spindle mounting: ISO 40 DIN 2080 - Vertical spindle speed range: 8 steps, electronically adjustable - Horizontal milling table length: 1,370 mm - Horizontal milling table width: 254 mm - Distance vertical spindle – horizontal table min.: 40 mm - Distance vertical spindle – horizontal table max.: 446 mm - Horizontal table T-slot size: 16 mm - Horizontal table T-slots: 3 - Horizontal table T-slot spacing: 63 mm - Horizontal table max. load capacity: 275 kg - Vertical spindle drive motor: 3 kW - Coolant pump motor: 100 W - Manual X-axis travel: 930 mm - Manual Y-axis travel: 400 mm - Manual Z-axis travel: 406 mm - Automatic X-axis travel: 850 mm - Automatic Z-axis travel: 350 mm - Drilling capacity steel (S235JR): 32 mm - Continuous drilling capacity steel (S235JR): 28 mm - Milling head rotation range (Z to X plane): +/- 45 degrees - Quill stroke: 127 mm - Quill feed: 0.04/0.08/0.15 mm/rev

Rok výroby: 1993, Stav: dobrý (použitý), číslo stroja/vozidla: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mount diameter: 3 x Ø 80 mm Clearance between cylinders: max. 435 mm Cutting speed: hydraulically adjustable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically adjustable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Furthermore, it features an automatic workpiece feeding system for 2 workpieces. Clamping of shank and end piece holders is hydraulic. The machine has a coolant system with an integrated magnetic chip conveyor for use without a special foundation (pit). Remarks: Gtjdpfxecc D Ddj Aftjt This machine is designed for large series production. It is in very good condition, still in its original paint. The machine is powered and available for inspection at our warehouse.

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, sústružnícky priemer nad priečnym suportom: 330 mm, otvor vretena: 78 mm, sústružnícky priemer nad lôžkom suportu: 520 mm, výška stredu: 260 mm, dĺžka sústruženia: 1 000 mm, ťah perom: 127 mm, priemer pinoly: 68 mm, celková dĺžka: 2 160 mm, celková šírka: 810 mm, maximálna rýchlosť vretena: 2 000 ot./min, otáčky vretena (min.): 20 ot./min, šírka lôžka: 300 mm, celková hmotnosť: 1 810 kg, držiak pinoly: MK 4, Výbava: otáčky plynule nastaviteľné, Výška hrotu: 260 mm Vzdialenosť medzi hrotmi: 1000 mm Priemer vŕtania vretena: 78 mm Vretenová hlava podľa DIN 55029 Camlock D8 Rozsah otáčok vretena: 20-2000 ot./min Gjdpfx Afjh Rvxhotett Výkon pohonu: 7,5 kW Výbava okrem iného: - plynulá regulácia otáčok - kalené a presne brúsené vodiace dráhy osi Z - Turcite povrchová úprava (na protikuse) suportu a priečneho suportu - manuálne centrálne maznanie jedným čerpadlom pre pozdĺžny a priečny suport - kompletné chladiace zariadenie so zadným ochranným krytom proti striekaniu a krytom proti striekaniu na suportoch - kryt skľučovadla - ovládacia hriadeľ s tromi nastaviteľnými vačkami - pracovné osvetlenie stroja - pevný hrot - sada vyrovnávacích podložiek stroja