Fréza

KUNZMANN WF 4/3

Stav: použitý, Rok výroby: 1995, - Heidenhain position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic clamping system - Rigid angle table - Electric central lubrication - Coolant system - Workspace lighting - Machine feet - Year of manufacture: 1995 Kdodovhfqrspfx Afdsw Specifications Milling table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 - Slot spacing: 63 mm - Max. load: 250 kg Working area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle centre: 140 - 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: - Feed longitudinal & cross: 0 - 1000 mm/min - Rapid traverse longitudinal & cross: 4000 mm/min - Feed vertical: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stav: veľmi dobrý (použitý), Rok výroby: 1994, Funkcionalita: plne funkčný, Tool milling machine Kunzmann WF4/3 with Heidenhain digital display, year of manufacture 1994, in excellent condition! Technical data: >> Year of manufacture: 1994 >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed in X, Y, Z axes from 0 to 2000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Approximate weight: 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital readout >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Kdedpfxsvyr R Ne Afdow For sale is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very easy thanks to the swiveling vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our premises.

Stav: použitý, Univ. NC Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travels X: 400 mm Y: 320 mm Z: 400 mm Table size: 650 x 350 mm Spindle taper: SK 40 Spindle speed: 40 - 2500 rpm Feeds X, Y and Z axes: 0 - 1000 mm/min infinitely variable Ksdpjlvyrbefx Afdjdw Rapid traverse X, Y axes: 4000 mm/min Rapid traverse Z axis: 3000 mm/min Quill stroke vertical: 60 mm Spindle motor power: 3 kW Power supply: 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angular table - Control cabinet mounted to the machine - Coolant tank with pump adjacent - Central lubrication - Lighting Space requirements (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg In good condition

Stav: takmer ako nový (použitý), Stroj ako nový, pochádza z laboratória x-pojezd 400 mm y-pojezd 320 mm z-pojezd 400 mm Ovládanie: Heidenhain TNC124 Kdedju Nnaiopfx Afdew Rozmer stola: 650 x 350 mm Upínanie nástrojov: SK 40 Otáčky vretena: 0–4 000 ot./min Výsun pinoly: 60 mm Vertikálna hlava otočná o 90 stupňov Celkový príkon: 5,0 kW Hmotnosť stroja cca 1,3 t Priestorové nároky cca 2,00 × 2,00 × 2,00 m

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant, From Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347283 - Fixed-angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed rate in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min; Z axis: 4,000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg Kdedsxuppuopfx Afdow - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic drawbar system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Power rating: 15 kVA Accessories and Equipment: - Heidenhain TNC 320 CNC control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, operator manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 toolroom milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. The machine features hydraulic clamping for both vertical and horizontal operations. Conversion from vertical to horizontal is very straightforward by simply swivelling the vertical head aside. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected in-house. Take the opportunity to view and test the Kunzmann on-site under power. There are 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 CNC available. The machines are available immediately.

Stav: veľmi dobrý (použitý), Rok výroby: 2002, Kunzmann WF4/3 Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent CONDITION CE-Compliant! Technical Data: - Year of manufacture: 2002 - Fixed angle table - Speed: infinitely variable up to 4000 rpm - Feed rate, infinitely variable on 3 axes from 0 to 2000 mm/min - Travel paths X/Y/Z: 400/350/400 mm - Rapid traverse x/y/z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic drawbar system - Weight approx. 1700 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Features: - Heidenhain TNC 124 control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual for the control, and programming examples - Handwheels - Coolant system About the Machine: Ksdpfxow U Exyo Afdedw For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only sparingly for training purposes. The control is very easy to operate. In addition, the machine features hydraulic clamping for both vertical and horizontal operations. Conversion from vertical to horizontal is straightforward thanks to the swiveling vertical head. The guides are lubricated regularly via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live under power at our facility. Further milling machines from renowned manufacturers can be found on our website.

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, Universal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 contouring control, in very good condition, CE compliant, from a training workshop! Technical Data: >> Year of manufacture: 2010, Machine no. 347281 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill travel vertical: 60 mm >> Vertical and horizontal quill - ISO 40 (SK40) >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Equipment and features: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: For sale is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 320 control. This universal milling machine is in very good condition and has only low operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine is equipped with hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power at our premises. Kdedpfx Afsxupd Ssdow There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines available. The machines are available immediately.

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, Universal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control, excellent condition, CE-compliant, from training workshop! Technical data: - Year of manufacture: 2010, Machine no. 347284 - Fixed angle table - Infinitely variable speed up to 4,500 rpm - Stepless feed in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal spindle - SK40 taper - Hydraulic drawbar system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and accessories: - Heidenhain TNC 320 CNC control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 Kdedsxupdlopfx Afdsw About the machine: Offered is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with only low operating hours. It comes from a workshop where it was used exclusively for training purposes. The control is very user-friendly. The machine features hydraulic clamping on both the vertical and horizontal positions. Conversion from vertical to horizontal operation is very simple by swiveling away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 control are available. Immediate delivery possible.

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, CNC vertical/horizontal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 contouring control – excellent condition, CE compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, machine no. 347247 - Rigid angular table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min; Z axis: 4,000 mm/min - Travels X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill taper: SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirements approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Features and Equipment: - Heidenhain TNC 320 contouring control - Hydraulic clamping, both vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Ksdpfx Asxupc Usfdedw For sale is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 320 contouring control. The machine is in excellent condition, with very few operating hours. It comes from a facility where it was used solely for training purposes. The control system is easy to operate. The machine features hydraulic clamping in both vertical and horizontal positions. Conversion from vertical to horizontal is very simple by swiveling away the vertical head. The guides are regularly lubricated via the central lubrication system. Both mechanical and electrical systems have been checked by us. You are welcome to inspect and test the Kunzmann under power at our facility. There are 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available for sale.

Stav: veľmi dobrý (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE compliant, from a Training Workshop! Technical data: >> Year of manufacture: 2010, Machine No. 347285 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Footprint approx.: 2.3 x 2 x 2 m >> Drive power: 15 kVA Equipment & Features: Ksdpfxexupczj Afdsdw >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with only minimal operating hours. It comes from an operation where it was used exclusively for training purposes. The control unit is very easy to use. Additionally, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is straightforward, thanks to the tilting vertical head. The ways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically checked in our facility. You are welcome to inspect and test the Kunzmann under power on-site. There are 7 Kunzmann WF4/3 machines with TNC 320 Heidenhain controls available. The machines are available immediately.