Tlaková nádoba na stlačený vzduch

LOHENNER 2000 Liter

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: fully refurbished Warranty: 1 year warranty Technical features: Left side angle stop according to AGA 4383 Longitudinal panel saw FM 16-3100: - Hardened guides - Automatic forward and return travel of saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (infinitely variable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable externally (without opening safety hood) - Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slow retraction from cut - Including safety hood interlock, lamella curtain SZ 5008 Residual cut facility SP 5004 – residual cuts down to min. 5 mm Saw motor: 7.0 kW Scorer motor: 1.1 kW (can be switched off independently) Cutting length: 3100 mm Cutting height: 70 mm Dust tested: limit value of 2 mg/m³ significantly undershot CE compliant Angle pressure device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material feed table HP 5021 (mounted to rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed phenolic plates (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) Lsdjxhg Ibjpfx Akload - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (also Wireless LAN) - Optimize cutting plans in the office and send directly to the machine - Multitasking capable - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphic display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front side): - Machined steel angle, phenolic table surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Phenolic surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated in HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scorer saw)

Stav: veľmi dobrý (použitý), Rok výroby: 2017, Funkcionalita: plne funkčný, Na predaj použitý olepovač hrán BRANDT KDF 440 C od skupiny HOMAG. Rok výroby: 2017 Jednotka na zrovnávanie hrán Lepiaca jednotka Lajdpfozc D D Dsx Akljd Tlaková zóna Kapovacia jednotka (2-motorová) Viacstupňová frézovacia jednotka Formovacie/obliehovacie jednotka na rohy (1-motorová) Profilový a plochý orezávací nôž Leštiaca jednotka Posuv: 14 m/min Možnosť EVA a PUR Riadenie PoweTouch PU horné prítlačné valce Málo prevádzkových hodín Dostupné od júna 2026 Veľmi dobrý stav.

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, Arol Closys Eagle VP uzatvárací stroj je nepostrádateľným zariadením pre firmy, ktoré chcú optimalizovať svoj proces vákuového balenia. Ponúka efektívne riešenie pre hermetické uzatváranie pohárov s priemerom 84 mm, čím zabezpečuje optimálnu konzerváciu produktov. Vďaka pokročilej technológii umožňuje dokonalé vákuum vo vnútri obalov, čo vedie k predĺženiu trvanlivosti potravín a zachovaniu ich kvality. Uzatváračka je navyše vybavená žirafou na automatické podávanie viečok, čo zjednodušuje proces a zvyšuje produktivitu. Arol uzatváračka sa vyznačuje spoľahlivosťou a robustnosťou, čo zaručuje dlhodobú prevádzku. Zariadenie sa ľahko integruje do existujúcich výrobných liniek a umožňuje plynulý prechod. Jej obsluha je jednoduchá a intuitívna, čo skracuje čas potrebný na zaškolenie personálu. Zároveň prispieva k zvýšeniu výkonu bez kompromisov na kvalite výsledného produktu, čo podnikom umožňuje zvýšiť ich konkurencieschopnosť na trhu. Zvolením strojov Arol získate osvedčené riešenie používané v mnohých odvetviach od roku 2011. Splňuje prísne požiadavky na hygienu a bezpečnosť potravín. Táto uzatváračka je ideálnym nástrojom na zvýšenie efektivity baliacej linky a zabezpečenie spokojnosti vašich zákazníkov. Technické údaje: Priemer pohárov: 84 mm Vákuová uzatváračka Automatické podávanie viečok Rok výroby: 2011 Laedpsu Nwiysfx Akled

Stav: generálne opravený (použitý), Rok výroby: 2007, Funkcionalita: plne funkčný, OTT Tornado FÜ + PU PLC-controlled system with 7" TFT touch color display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Flush milling – up to 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof enclosure with central extraction unit Cleaning kit with 4-way spray system, fine buffing unit, and lubricant spraying device First delivered in 2006 Machine is WORKSHOP-TESTED and in EXCELLENT CONDITION Lajdev Sm Hcspfx Aklsd The gluing unit was recently fully adjusted and all wear parts replaced Technical Data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 high-frequency motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 high-frequency motors, 0.3 kW, 12,000 rpm Flush milling unit: with 2 high-frequency motors, 0.7 kW, 12,000 rpm Fine milling unit: with 2 high-frequency motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper Buffing unit 3-way spray system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Immediately available -

Stav: použitý, Technické údaje: Max. uhol ohybu: 180 ° Pracovná výška: 350-550 mm Prevádzkové napätie: 380 V Otáčky za minútu: 10-20 ot./min Maximálny počet tyčí: 1-4 mm Celkový požadovaný výkon: 1,3/2,1 kW Hmotnosť stroja cca: 690 kg Rozmery stroja cca DxŠxV: 1,2 x 0,87 x 1,2 m - Dve rýchlosti otáčania taniera - Prepínač prevádzkových režimov pre automatickú prevádzku, impulznú prevádzku a nepretržitú prevádzku - Štyri plynulo nastaviteľné protiľahlé upínacie lišty Lodpfx Aksxu Dxqjlead Bez príslušenstva!

Stav: dobrý (použitý), Rok výroby: 2007, Funkcionalita: plne funkčný, Na predaj je olepovačka hrán typu Brandt KDF 660. Lajdpfxeyhqa Ns Aklod

Stav: dobrý (použitý), Rok výroby: 2011, Single-sided edge banding machine, right-hand version, with workpiece return, for hot-melt adhesive and/or PUR bonding, used, year 2011; approx. 8,700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Minimum width: 70 mm; Minimum height: 8 mm Maximum height: 60 mm; Minimum length: 150 mm Feed speed: 14 – 20 m/min, steplessly adjustable Glue application: glue application roller with Vario-melt dosing system Working height: 900 mm Machine dimensions: Height: 1,600 mm; Width: 1,100 mm; Length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double roller top pressure with electronic positioning - Pneumatic control of all units from central touch-screen operation via Beckhoff industrial PC - CM – CombiMelt bonding system Processing units: - FK – JOINING UNIT for processing chipboard edges with 2 HF motors 2.2 kW, 200 Hz, 12,000 rpm, operating in both directions, stroke-controlled. Tool: DIA jointing cutter set Ø 85 x 45 x 30, z 3, for panel thicknesses up to 42 mm - AKM – Edge magazine for automatic feeding of strip edges, with spiked roller feed and pneum. pressure beam. Includes optical edge monitoring - M4+1 – Fourfold magazine, automatic edge roll retraction. For holding four edge rolls. With variable edge slot for changing edge materials. With automatic selection menu - K 13 – DOUBLE END TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically swiveling 0/5° - K 160 – 2 HM SAW BLADES 140 x 3.2 x 16 mm, Z 36 - BFC – FLUSH MILLING UNIT for pre-milling glued edges, working counter-rotationally. One-sided sensing, adjustment via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, z 4 (HF70) Ledpezb Iuqofx Akload - HFt – FINE MILLING UNIT for radius milling of glued edges, counter-rotational operation. Dual-sided sensing, automatic adjustment via program control based on edge thickness. With 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, Z 4 (HF70), optionally also equipped with radius tools - HFt – FINE MILLING UNIT for radius milling of glued edges, counter-rotational operation. Dual-sided sensing, automatically program-controlled setting to the edge thickness. With 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 HM radius reversible knife cutter heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible knives R 1 – R 3 - AKF – AUTOMATED PROFILE COPYING MILLING UNIT with two independent spindles for top and bottom 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction - AZK 4 – automatic scraper blade change unit - ZKf – SURFACE SCRAPER UNIT with fine adjustment for removal of residual hot-melt adhesive in the joint area – with extraction Additional equipment: - AS – Antistatic spray unit, dual, for glue line - GS – Glide agent spray unit, for application of antistatic glide agent on the edge surface, electronically controlled - RS – Cleaning set with 4-way spray unit and fine polisher for surface cleaning - KEO-c – EDGE POLISHING, oscillating and automatic adjustment 2 motors 0.2 kW, with 2 cloth discs - WE – Angle feed guide, as a push sled, foldable. For narrow parts. Interface for workpiece return system Ligmatech ZHR 05 or equivalent

Stav: použitý, Rok výroby: 2010, Funkcionalita: plne funkčný, One-sided edge banding machine in full configuration, with a total of 3 interchangeable glue pots, 1 of which is for PUR adhesive. Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Ljdpjybbaysfx Aklsad Machine equipment: Infeed fence, automatic adjustment via program Release agent application Jointing unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll / strip magazine 1 main pressure roller and 3 subsequent pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors, 660 W, swivels 0 to 8 degrees Copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. working speed 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control: ICOS open TS, PC-based

Stav: nový, Rok výroby: 2013, Hrúbka hrany: od 0,4 do 15 mm Hrúbka obrobku: od 10 do 60 mm Posuvová rýchlosť: 18 m/min. Nový stroj, ešte nie je v prevádzke. Špeciálna cena! - Zosadzovacia frézovacia jednotka Ljdpfox Dng Rsx Aklsad - Podávacia jednotka pre nekonečný materiál alebo masívne drevené lišty - Lepiaca jednotka - Prerezávacia jednotka na odrezávanie hrany z kotúča - Zrovnávacia jednotka na zarovnanie hrany na obrobku - Frézovacia jednotka na predfrézovanie / zarovnanie - Jemná frézovacia jednotka pre úkosy alebo zaoblenia - Jednotka na zaobľovanie rohov (s dvoma motormi) - Stieracia čepeľ - Leštiaca jednotka