Zamestnanecký materiál Briketovací lis

mütek MAP 750

Used, good condition.
Technically inspected pre-owned machine

Base machine starting from: €139,750 net
*Options available at extra cost, see below
Delivery time approx. 16 weeks after order placement

Briquetting press, e.g., for wood dust, spelt husks, enrichment material (for example, for pigs to play and nibble), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced

Technical data:
Throughput capacity up to a maximum of 750 kg/h (material dependent)
(e.g., sawdust with a bulk density of 250 kg/m³)
An exact throughput rate can only be determined after testing with your material. Throughput may vary significantly depending on the bulk density of the input material.

Customs tariff number: 84793010
Fedpfx Agofmqq Ejqefw
Briquette Ø 65 mm
Includes 2 m press channel
Main drive motor 37 kW
Feed auger geared motor 2.2 kW
Compactor auger 5.5 kW
Hydraulic pump motor 0.37 kW
Total connected load: approx. 47 kW
Control panel with plain-text display for operational status and load display for main drive and feed augers
PLC control with operating hours counter in control cabinet
Machine has CE mark
Automatic start-stop function
Dimensions 3100 x 860 x 1800 mm (L x W x H)
Weight 3,800 kg

Options at extra cost:

Temperature control unit for press tools
To maintain optimal temperature for best briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch
Ready-wired for connection – mandatory for operation
Including corresponding control system + €7,850 net

Guillotine or tablet breaker
For cutting briquettes to length + €6,900 net
Compressed air connection required!

Silo for MAP series + €19,940 net
- Storage silo above the machine -
Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor.

Transport pipe/cooling section (nominal: 4x2 m)
Per 2 meters €990 net

Assembly/commissioning (nominally approx. 2–3 days on site)
Charged according to time and proven effort. The following rates apply:
Service technician/mechatronic per hour (assembly/travel): €129.00
Overtime: 25% surcharge
Saturday and night hours: 50% surcharge
Sunday and public holiday hours: 100% surcharge
Per diem allowance per technician per day: country-specific
Per car/van and travel kilometer: €0.98/km
Travel and accommodation charged to the client based on receipts or as flat-rate

Test with customer material (by arrangement, up to max. 750 kg): €1,970 net (lump sum)

Raw material requirements:
- The moisture content (atro) must be between 6% and 15%
- Maximum chip length 18 mm
- Installation temperature: heated room, minimum +5°C
- Feed material must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may result.

Inzerát bol automaticky preložený. Chyby v preklade sú možné.