Vaňa vyrobená z nehrdzavejúcej ocele 304 - 1789L

ARSILAC

Stav: takmer ako nový (použitý), Rok výroby: 2020, Funkcionalita: plne funkčný, vstupné napätie: 400 V, typ vstupného prúdu: trojfázový, celková výška: 3 000 mm, celková šírka: 2 400 mm, celková dĺžka: 6 000 mm, spotreba energie: 35 kWh, Výbava: dokumentácia / manuál, Vacuum Evaporator – 57,000 L/day | Industrial Wastewater and Process Water Treatment General Description The offered vacuum evaporator (57,000 L/day) comes from a project for the treatment of process water and digestate at a biogas producers’ cooperative in southern France. The plant was fully installed but never commissioned. It is in like-new, factory-preserved condition and available immediately. The evaporator is designed as a thermally efficient vacuum system and is used for volume reduction, concentration, and recovery of water-based liquid wastes. In combination with a downstream reverse osmosis unit, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Technical Data (Evaporator 57 000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum operation) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on raw water) Condition: As-new, factory-preserved, unused Areas of Application Knsdpfx Afewnbxdozsd - Biogas and digestate processing – recovery of nitrogen concentrates - Landfill leachate treatment – reduction of wastewater volume - Chemical & pharmaceutical industry – process water purification - Food industry – cleaning and reuse of rinse and process water - ZLD systems (Zero Liquid Discharge) – final stage for concentrate evaporation Advantages - High thermal efficiency via vacuum operation - Robust stainless steel construction (AISI 316) for aggressive media - Fully automatic control system (Siemens S7 + Touch HMI) - Low maintenance requirements, durable components - Ideally combinable with RO systems (double pass integration) - Immediately available – refurbishment, commissioning & 1-year warranty on request Special Features - Plant was part of a combined system with SIMPEC RO 8000 44 8 - Never used, fully documented and preserved - Location: Southern France (dismantling & transport can be organized by RIEFILT GmbH) Price & Scope of Supply Price: On request Scope of supply: Evaporator 57 000 + control system + documentation Optional: Refurbishment / factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Stav: použitý, Reverse osmosis system with Grünbeck GENO fine filter FS 1 1/4, Jansen GmbH AQUATRON + Grundfos CR5-24 A-FGJ-A-E-HQQE pump. For further details and scope of delivery, please refer to the photo. Technical data as per nameplate. Length: approx. 3.40 m / Width: 0.70 m / Height: 1.60 m Item condition: used, untested Knsdpfetzw R Tox Afzsd An inspection in Wettringen is possible! For further questions you can contact us by email. Sale is exclusively to commercial buyers for business purposes, and without any warranty for material or legal defects! By purchasing, you confirm that you are acting commercially or as a freelancer. Otherwise, you are violating our terms and conditions! Wettringen

Stav: takmer ako nový (použitý), Rok výroby: 2021, Funkcionalita: plne funkčný, vstupné napätie: 400 V, typ vstupného prúdu: trojfázový, tlak: 75 lišta, celková výška: 2 250 mm, celková šírka: 2 200 mm, celková dĺžka: 7 000 mm, teplota: 40 °C, hladina hluku: 87 dB, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, Technical Short Description Industrial Water Treatment System – SIMPEC RO Double Pass 8000 44 8 The system is a fully automated, two-stage reverse osmosis unit designed for industrial applications requiring high-purity water. It is purpose-built for process water recycling, landfill leachate treatment, biogas and agricultural operations, as well as the food and chemical industries. The system is pre-assembled on a stainless steel skid and incorporates all key components for water treatment, including chemical dosing, filtration, high-pressure pumps, and automation. Main Features - Two RO stages (36 + 8 membranes) - Pre-filtration with multimedia and cartridge filters - Automatic pH adjustment (acid / caustic) - Dosing system with 3 dosing pumps - Siemens S7 control with TP700 HMI panel - Integrated CIP (Clean-In-Place) system - Fully piped and wired (Plug & Play) - Premium materials (AISI 304 / 316, FRP) - Pressure sensors, conductivity probes, flow meters Process Description Feed & Pre-Filtration Raw water is delivered via a stainless steel pump to a multimedia filter (MMF) for removal of suspended solids, followed by fine filtration with cartridge filters. First RO Stage (High Pressure) The pre-treated water is supplied by a 44 kW high-pressure pump to six RO pressure vessels holding a total of 36 membranes. Result: Permeate with conductivity < 1000 µS/cm. Second RO Stage (Polishing) Kjdpfxjw Uf Ihe Afzend Permeate from stage 1 undergoes further treatment in two RO vessels with 8 membranes. Result: Ultra-pure water with conductivity < 100 µS/cm. Chemical Dosing Three metering pumps regulate: - Antiscalant / acid on the feed side - NaOH for concentrate pH correction Automated Control All operating parameters (pressure, conductivity, flow, pH, temperature) are measured via sensors and visualized on the Siemens HMI. Fully automatic operation with start/stop cycles and alarm management. Typical Applications - Biogas and agricultural operations (digestate and wash water) - Landfill leachate treatment - Process water recycling in industrial plants - Food and beverage industry - Pre-treatment for evaporators/distillation units Technical Highlights - High water recovery rate (up to 90%) - Low operating costs due to energy-efficient pumps - Robust and low-maintenance - CE-certified, IP55 protection rating - Low-noise design (

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, Plne automatický lineárny PET vyfukovací stroj Plne servopohon Knodpfx Afswrrcnozed 4 formy do 2000 ml Úplne nová vyfukovacia kapacita 4000 fliaš/hod Nízka spotreba energie

Stav: použitý, Funkcionalita: plne funkčný, celková výška: 5 500 mm, kapacita nádrže: 21 500 l, dĺžka záruky: 6 mesiace, vnútorný priemer: 2 500 mm, TECHNICAL DATA - Vertical cylinder on closed legs - Brand: CIDEC - Capacity: 21,500 liters - Material: Stainless steel 316 TOP - Off-center chimney at the front - Lifting lugs SHELL - Rectangular external door 300×420 mm - Level gauge tube - Partial discharge with butterfly valve DN 70 MÂCON - Sampling tap Knodpjwamb Isfx Afzod BOTTOM - Conical bottom with central discharge + curved outlet pipe at the front of the tank with butterfly valve DN 70 MÂCON - 4 legs, height 600 mm DIMENSIONS - Diameter: 2,500 mm - Height: 5,500 mm

Stav: nový, Funkcionalita: plne funkčný, TECHNICKÉ VLASTNOSTI - Efektivní kapacita: 1210 l - Válcovito-kuželové dno - Horní víko s rychlouzávěrem, průměr 400 mm - Bezpečnostní ventil z nerezové oceli dle DIN 50 - Výsuvný sloupek s: - Odnímatelnou mycí koulí - Motýlkový ventil 2" Tri-Clamp - Opěrka na žebřík - Chladicí plášť výšky 750 mm - Maximální tlak na pás typu voština: 3 bar - Teploměr - Nerezový vzorkovač dle DIN 15 - Čistý výpust na kuželu s nerezovým motýlkovým ventilem 2" Tri-Clamp - 4 nastavitelné nohy s výztužnými tyčemi - Úplné vyprazdňování se 90° kolenem + nerezový motýlkový ventil 2" Tri-Clamp - Přípojka pro sondu PT 100 - 2 zdvihací oka Knodpjwdffasfx Afzsd - Vnější povrch: kartáčovaný - Vnitřní povrch: BA, sváry leštěné, mořené, pasivované ROZMĚRY - Celková výška: 2510 mm - Průměr: 1084 mm

Stav: použitý, Výrobca: Then Typ: Kužeľový násypník na pojazdnom ráme Miešanie: Áno Užitočný objem: 150 litrov Manuálny vypúšťací ventil Knedpfx Ajw H Stnjfzod

Stav: použitý, Funkcionalita: plne funkčný, celková výška: 6 300 mm, kapacita nádrže: 22 500 l, vnútorný priemer: 3 020 mm, TECHNICKÉ ÚDAJE - Vertikálna valcová nádrž na nohách: C12/C22 . C13/C23 - Značka: Pierre Guerin - Nádrž s plochým dnom na nad sebou stojacich nohách - Kapacita: 134 hl + 91 hl - Materiál: 304 L - Vnútorné vyhotovenie: za studena valcované - Vonkajšie vyhotovenie: brúsené Horná komora: Strecha - Centrálne komínové výústie - Poklop Ø 500 s upínacími svorkami - 1 prípojka 50 Macon na komíne – vonkajší aj vnútorný závit - Držiak pochôdzneho roštu Plášť - Dvere 410 x 530 z nehrdzavejúcej ocele, otváracie smerom von, s odkvapovou hranou - Pri odpúšťaní, guľový ventil z nehrdzavejúcej ocele Ø 50 a výmenný oblúk - Degustačný ventil z nehrdzavejúcej ocele - 8-krát mušľovitý cirkulačný okruh Dno - Pri úplnom vyprázdnení, guľový ventil z nehrdzavejúcej ocele Ø 50 Spodná komora: Strecha - Decentálne komínové výústie - Poklop Ø 500 s upínacími sponami - 1 prípojka 50 Macon na komíne – vonkajší aj vnútorný závit Plášť - Dvere 410 x 530 z nehrdzavejúcej ocele, otváracie smerom von, s odkvapovou miskou - Pri čistom odpúšťaní, guľový ventil z nehrdzavejúcej ocele Ø 50 a oblúk na nádrž na usadeniny - Degustačný ventil z nehrdzavejúcej ocele - 5-krát mušľovitý cirkulačný okruh Dno - Pri úplnom vyprázdnení, guľový ventil z nehrdzavejúcej ocele Ø 50 - Nohy s nastavovacími skrutkami a platňami ROZMERY - Priemer: 3020 mm - Celková výška: cca 6300 mm Kedjw Uw Rzspfx Afzsnd