Kužeľový drvič Svedala

Stav: pripravené na použitie (použité), Bubnové motory Dedpji A Apuefx Afmskg použité bubnové motory veľké zásoby na šírku pásu 300-1400 mm

Rok výroby: 1982, Stav: dobrý (použitý), číslo stroja/vozidla: 14320, lis na balíky / lis na papier Dedpsiuky Ijfx Afmokg

Stav: použitý, Pipe bending machine, mandrel bending machine, tube and profile bending machine Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Bending tool driven by AC servo motor and Alpha spur gear unit, planetary gearbox Dksdpjd E A I Iofx Afmsg - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, Art. 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg In good condition Removed from a fully functional special purpose machine, was tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = M₀: 6.4 Nm Rated current = I₀: 6.1 A Max. speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units available in right-hand design. 5 units available in left-hand design. The price quoted is per bending unit with servo motor. On request, we also sell individual subassemblies of the bending unit. We also offer the electrical components for servo motor control. Hydraulic power units are also available.

Stav: veľmi dobrý (použitý), Rok výroby: 2015, prevádzkové hodiny: 14 900 h, Funkcionalita: plne funkčný, celková hmotnosť: 33 000 kg, výkon: 264 kW (358,94 k), otáčky (min.): 70 ot./min, vstupné napätie: 400 V, Pomalobežný robustný jednohriadeľový drvič Vhodný na predbežné drvenie rôznych materiálov bez masívnych rušivých prímesí. Použitie: Drvenie priemyselného a komunálneho odpadu, fólií, obalových materiálov, textílií, papiera, gumy, demolačného dreva, paliet, papierových rolí, káblových bubnov, zmiešaných plastov na energetické či materiálové zhodnotenie, voľne alebo lisovaných v balíkoch. Dksdpfx Aov S Hyvsfmsg Lindner Jupiter 2200 Výkon pohonu: 2 x 132 kW (ABB motory) Veľkosť otvorov sita: podľa želania zákazníka, mm Rozvádzač: kompletný s (frekvenčným meničom ABB) Pracovný otvor: 2135 x 1750 mm Objem násypky: cca 5,5 m³ Dĺžka rotora: 2200 mm Obvod rotora: 745 mm Otáčky rotora: 87 ot./min (pri 50 Hz) Počet nožov na rotore: 84 ks Rozmery noža: 172 x 57 x 28 mm Spodné protiostrie: 6 ks Horný stierací hrebeň: 6 ks Hydraulický podávač: 11 kW Celková hmotnosť: cca 33 t Rozmery (D x Š x V): 5500 x 3050 x 3100 mm, s násypkou výška = 4880 mm Dodanie: ihneď Dve vykladacie pásy k dispozícii ako voliteľná výbava.

Stav: dielensky repasované (použité), Rok výroby: 2012, prevádzkové hodiny: 25 895 h, Funkcionalita: plne funkčný, lisovacia sila: 78 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 500 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 600 kg, celková hmotnosť: 24 000 kg, kapacita olejovej nádrže: 1 000 l, výkon: 55 kW (74,78 k), objemový prietok: 930 m³/h, Technical Data - Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 units (as of July 2025) Main press force: 78.5 t Specific press force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Filling chute dimensions: 1,500 x 1,100 mm Theoretical throughput capacity: 930 m³/hour Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at a bulk density of 30 kg/m³: approx. 9 to 12 t/hour, depending on material 50 kg/m³: approx. 14 to 17 t/hour, depending on material 100 kg/m³: approx. 16 to 25 t/hour, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, depending on material Bale weight: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the Baler: The machine has been partially overhauled and serviced in our workshop. Following completion, it was tested in ongoing operation, both in manual and automatic mode. The following refurbishment work was carried out: - Machine cleaned, partially derusted, and partially repainted - Hydraulic oil tank drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with diverter pulleys for lower wire cleaned and made operational - Press ram side guides removed, smoothed, remounted, and newly adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder barrel honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of the main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire direction pulleys serviced - Chain cleaned, lubricated, and tension readjusted - Drillomat cleaned, wire cutters, driller shafts and driller fingers checked, tightened to the specified torque and serviced - Door contact switch checked and partially replaced - Emergency stop switch tested - Complete electrical wiring checked and partially renewed - Bearings of the wire guide rollers under the baler replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and tested in both manual and automatic modes Scope of delivery: Only the baler itself is offered for sale. Remarks: Dksdpfx Asvwlqqofmsg All documentation (operation manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Stav: použitý, Rok výroby: 2003, prevádzkové hodiny: 23 000 h, Výbava: pohon všetkých kolies, Liebherr 924 !!! SPECIÁLNY BAGER PRE LES/HOLZ !!! Rok výroby: 2003 Dkedpfxovm N Dte Afmog 23 000 mth Nové čerpadlo s faktúrou 16 200 € Nový motor s faktúrou 17 700 € 16-tonový navijak s diaľkovým ovládaním Balónové pneumatiky Drevochytič Hiab, rok výroby 2016 Tel: Pomôžeme s financovaním alebo leasingom Predaj v rámci EÚ: netto po predložení firemných dokumentov a IČ DPH Predaj mimo EÚ: Kaucia 500 € Hovoríme anglicky Hovoríme srbsko-chorvátsky Naše služby pre vás: * Exportné doklady a EUR1 * Colná značka * Preprava po celom svete * Možnosť prenocovania * Transfer z letiska Mníchov alebo z vlakovej stanice Passau Tel:

Stav: neskontrolované (použité), Hydraulický lis na lisovanie papiera a iných materiálov. Zariadenie bolo plne funkčné pred demontážou. Rozmery lisu: dĺžka 4850 mm, šírka 1370 mm, výška 3000 mm (možnosť zníženia na 2300 mm). Hmotnosť približne 3500 – 4000 kg. V prípade otázok ma prosím kontaktujte na čísle 539 660 495. Dkedpfx Afoh Nyfyomsg

Stav: dobrý (použitý), 10,000 units Insert Grids/Wire Mesh Decks for Pallet Racking, galvanized Insert grids available in various sizes, mesh dimensions, load bars, and load capacities: Negotiable price: from €15.00 net per m² ex works Larger quantities available upon request! Specifications: Insert Grid Mesh Size Load Bar Load Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used goods, very good condition, see pictures. Stock available. Transport upon request. Inspection possible at any time by appointment. Further information upon request. Dsdpfx Afod Hvvgsmskg Constant supply of over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to change and error in technical specifications, information, and prices - as well as prior sale! Refer to our terms and conditions, all prices excluding VAT, ex works) Purchase / Sales We are looking for and/or constantly offer a wide range of products from various sectors. - Broom-clean business clearances - Company closures - Fast – Flexible – Efficient! We can also clear or dispose of inventory for liquidators. Write to us with a few keywords and we will get back to you immediately. To visit our website, please click on our logo!

Stav: pripravené na použitie (použité), Čeľusťový drvič Kleemann Dsdpou S Tqvsfx Afmjkg Značka: Kleemann Typ: SSTR 1250 Vstupný otvor: 1250 x 950 mm Vrátane: Elektromotor Hmotnosť cca 38 ton

Stav: dobrý (použitý), Rok výroby: 2002, prevádzkové hodiny: 11 245 h, číslo stroja/vozidla: CCC00513, 239 kW Dkodpfx Afslhqhmemeg Hmotnosť: 50,5 t Motor kompletne repasovaný podvozok ako nový šírka pásu: 600 mm nové tesnenie valcov