Rýchlobežná radiálna vŕtačka HSK40

Stav: dielensky repasované (použité), Rok výroby: 2008, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 2 500 mm, zdvih osi Y: 1 250 mm, zdvih osi Z: 1 000 mm, rýchloposuv os X: 25 000 m/min, rýchly posuv osi Y: 25 000 m/min, rok poslednej generálnej opravy: 2025, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! Technical Specifications of the Machine: Year of Manufacture: 2008 Control System: Heidenhain iTNC 530 Travel ranges: X-axis (mm): 2,500 Y-axis (mm): 1,250 Z-axis (mm): 1,000 Rotary Table Size: Length (mm): 1,000 Chsdpfx Asv Rw Uuofwsf Width (mm): 1,000 Spindle Speed Range (rpm): 15,000 Feed Rates X, Y & Z axes (mm/min): 10 - 10,000 Max. Rapid Traverse Speed X, Y & Z axes (mm/min): 25,000 Milling Head: Automatic vertical milling head Tool Interface: HSK 63 A Main Spindle Drive Power (100% duty cycle): 25 kW - Chip conveyor - Coolant and lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3 m spiral cable - INA linear guideway system RUE 45 on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven solution for a cost-effective entry into our product lines. Machines available in this series are acquired through a rigorous selection process and subjected to thorough inspection (Deep-Dive-Check). After intensive cleaning, any identified and apparent defects or faults are professionally repaired by our expert service team.

Stav: nový, Instead of €14,874 gross (RRP), now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% off the RRP! Straightening Press 150 tons with electric motor and additional manual operation via a hand lever pump, especially suitable for precision work. Available versions: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode via a lever for up and down movement. For precision tasks (e.g. pressing bearings, straightening, etc.), the press is also equipped with a hand pump, allowing fine manual control of the pressure. The pressure cylinder is mounted on a sliding carriage, so it can be shifted sideways, allowing you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge included - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable daylight opening - Lifting chains for easy adjustment of the opening height - Heavy-duty machine frame - Cylinder laterally adjustable (mounted on a sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses available in various designs, sizes, and with optional accessories! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us for professional and non-binding advice. The specified price is net plus 19% VAT. All information subject to change! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging portal), during which we first provide you with a non-binding offer and also inform you about our terms and conditions and the right of withdrawal, including our legal notice, before any purchase or contract is concluded. Codpfx Ajf Sqcksfwehf

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, číslo stroja/vozidla: 152362081, hĺbka hrdla: 2 700 mm, maximálna rýchlosť vretena: 1 800 ot./min, otáčky vretena (min.): 9 ot./min, max. hrúbka oceľového plechu: 100 mm, priemer vretena: 110 mm,

Stav: pripravené na použitie (použité), Rok výroby: 2009, Všeobecné údaje Hmotnosť stroja: 25 000 kg Ovládacia jednotka Značka: MAZATROL Model: MATRIX Hlavný pohon Rozsah otáčok vretena: 12 000 ot./min. Výkon motora vretena: 26 kW Upínanie nástroja: ISO 40 Posuvy Pohyb v osi X: 630 mm Pohyb v osi Y: 510 mm Pohyb v osi Z: 560 mm Stôl Vonkajšia dĺžka: 500 mm Vonkajšia šírka: 500 mm Maximálne zaťaženie stola: 500 kg Médiá Odvádzač triesok: Áno Toto 5-osé obrábacie centrum Mazak Variaxis 630-5X T bolo vyrobené v roku 2009 a ponúka pokročilé možnosti pre zložité obrábacie operácie. Ideálne pre presné strojárstvo, toto vertikálne obrábacie centrum zaručuje spoľahlivý výkon. Využite možnosť kúpy Mazak Variaxis 630-5X T – vertikálneho obrábacieho centra. Pre viac informácií nás kontaktujte. Chedpfswbw A Esx Afwjf Aplikácie Frézovanie

Stav: dobrý (použitý), Rok výroby: 1962, Rýchlobežná radiálna vŕtačka, radiálna vŕtačka, vŕtačka, konzolová vŕtačka, rýchlobežná radiálna vŕtačka Cjdpfxoirax Uo Afwshf - Upínací stôl: 400 x 1100 mm - Vyloženie ramena: 930 mm - Kuželové uchytenie: MK4 - Výkon motora: 1,35/1,8 kW - Otáčky: 41-1700 ot./min - Stĺp: Ø 200 mm - Zdvih vretena: 125 mm - Závitovacie zariadenie: ÁNO - Posuv: 0,075 - 0,3 mm/ot. - Rozmery: 1800/1235/V2240 mm - Hmotnosť: 1500 kg

Stav: nový, Univerzálna frézka Značka: OPTimill Model: MT 50 Katalógové číslo: 3336005 Csdpfebnfxusx Afwjhf Stav: Nový stroj Pojazdy: - Os X 580 mm - Os Y 200 mm - Os Z 340 mm Štandardne vybavená: - 3-osý digitálny odpočet DPA 31 PLUS - Automatický posuv v osi X - Dlhý frézovací trn 16 mm - Dlhý frézovací trn 22 mm - Upínanie skľučovadla B 18 - Ozubené vrtacie skľučovadlo 3-16 mm/B 18 - Redukčná puzdro MK 2 s vyražacou štrbinou - Redukčná puzdro MK 3 s vyražacou štrbinou - Strojové svetlo - Zariadenie na chladenie - Ovládacie náradie - Návod na obsluhu

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Chodpfju Aa I Sex Afwef Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: takmer ako nový (použitý), Rok výroby: 2021, Technické údaje: Kónická ohýbačka Pracovná šírka: 1050 mm Max. ohýbací výkon pre bežnú oceľ St40: 4,0 mm Priemer kónického horného valca: 70 - 185 mm Priemer bočných a stredného spodného valca: 105 mm Kónické ohýbacie zariadenie Cjdpfsw An Uhox Afwohf Pojazdný ovládací panel s digitálnym displejom Hydraulické otočné ložisko CE značka Výkon motora: 5,5 kW Rozmery (dĺžka x šírka x výška): cca 3600 x 1200 x 1200 mm Vlastná hmotnosť: cca 3 tony Stav: veľmi málo používaný, stav ako nový Predávajúci nezodpovedá za chyby v písaní alebo prenose dát. Stroj je po vizuálnej, technickej stránke a opotrebovaní zodpovedajúci veku; použité stroje sa predávajú bez akejkoľvek záruky.

Stav: nový, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (Motors, Measuring Systems, and Electronic Handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (Cross Ram): 1,300 mm V-axis (Cross Rail): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. Load Capacity up to 15,000 kg Automatic Universal Swiveling Milling Head 1° x 1° (Optionally with fixed quill Ø 210 mm) Spindle Taper: SK50 DIN 69871/A Spindle Speed: 6,000 rpm (oil-cooled) Max. Spindle Motor Power: 53 kW ICS – internal coolant supply – 36 bar Rapid Traverse X,Y,V,Z: 30 m/min Positioning Accuracy: 0.020 mm Repeatability: 0.010 mm ATC – Tool Changer: 60 positions (vertical / horizontal change) Double Hinge-Belt Chip Conveyor (longitudinal) Chedpfxjq I Nkbe Afwjf Perimetric Enclosure (open top) Only inquiries from Germany will receive a response.

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm Chsdpfjrmkfnjx Afwsf • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB