Ohrievacia a sušiaca rúra TRW, model II

Rok výroby: 2003, Stav: pripravené na použitie (použité), There are seven Arburg injection moulding machines available: 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365 h, clamping force: 600 kN, screw diameter: 30 mm, injection weight: 97 g, max. injection pressure: 2,470 bar, shot volume: 106 cm³, centering: 125 mm/125 mm, max. opening stroke: 550 mm, daylight between platens: 550 mm, platen dimensions X/Y: 446 mm/446 mm, tie bar spacing: 320 mm/320 mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4,000 mm/2,300 mm. Multilift handling unit included. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769 h, clamping force: 1,000 kN, screw diameter: 30 mm, injection weight: 97 g, max. injection pressure: 2,470 bar, shot volume: 106 cm³, centering: 125 mm/125 mm, max. opening stroke: 750 mm, daylight between platens: 750 mm, platen dimensions X/Y: 570 mm/570 mm, tie bar spacing: 420 mm/420 mm, core pulls: 2, machine dimensions X/Y: approx. 4,700 mm/2,350 mm. Multilift handling unit included. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784 h, clamping force: 300 kN, screw diameter: 20 mm, injection weight: 28 g, max. injection pressure: 2,500 bar, shot volume: 31 cm³, centering: 110 mm/110 mm, max. opening stroke: 550 mm, daylight between platens: 550 mm, platen dimensions X/Y: 446 mm/446 mm, tie bar spacing: 270 mm/270 mm, core pulls: 1, temperature control units: 6. Geiger handling unit included. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784 h, clamping force: 300 kN, screw diameter: 20 mm, injection weight: 28 g, max. injection pressure: 2,500 bar, shot volume: 31 cm³, centering: 125 mm/110 mm, max. opening stroke: 350 mm, daylight between platens: 350 mm, platen dimensions X/Y: 446 mm/446 mm, tie bar spacing: 320 mm/320 mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595 h, clamping force: 250 kN, screw diameter: 22 mm, injection weight: 27 g, max. injection pressure: 2,340 bar, shot volume: 30 cm³, centering: 110 mm/110 mm, max. opening stroke: 425 mm, daylight between platens: 425 mm, platen dimensions X/Y: 400 mm/400 mm, tie bar spacing: 221 mm/221 mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885 h, clamping force: 300 kN, screw diameter: 20 mm, injection weight: 28 g, max. injection pressure: 2,500 bar, shot volume: 31 cm³, centering: 110 mm/110 mm, max. opening stroke: 550 mm, daylight between platens: 550 mm, platen dimensions X/Y: 446 mm/446 mm, tie bar spacing: 270 mm/270 mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3,750 mm/2,400 mm. Multilift handling unit included. Gedpfx Astyyn Hjftjil 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504 h, clamping force: 250 kN, screw diameter: 18 mm/22 mm, injection weight: 18 g/27 g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20 cm³/30 cm³, centering: 110 mm/110 mm, max. opening stroke: 425 mm, daylight between platens: 425 mm, platen dimensions X/Y: 400 mm/400 mm, tie bar spacing: 221 mm/221 mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3,300 mm/1,100 mm. Documentation available. An on-site inspection is possible.

Rok výroby: 2017, Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Kombinovaná pec Wiesheu EBO 60x80, rok výroby 2017 - Euromat 64 L 2600-A-FBBBCBAA Gisdpfx Aep Sr N Rjftsl - Ebo 68 M X1625-A-BBADA

Stav: použitý, Rok výroby: 1988, prevádzkové hodiny: 30 000 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 20992, Vážený pán / Vážená pani, Gijdpfxewah R Rs Aftjl máme pre Vás možnosť ponúknuť vákuovú pec IPSEN VTTC-324 z roku 1988. Charakteristika vákuovej pece: Sn = 165 kVA Un = 400 V, 50 Hz In = 240 A Využiteľné rozmery: 450 mm x 600 mm x 900 mm Výkon ohrievačov = 120 kW Napätie ohrievačov = 43 V, 50 Hz Prúd ohrievačov = 1613 A Teplotný rozsah = 350 - 1320°C Absolútne vákuum = 1 x 10^-5 (difúzna výveva) Absolútny tlak = 5 bar Súčasťou pece je aj veľké množstvo náhradných dielov a príslušenstva na tepelné spracovanie (zásobník na plyn, ohrievače, množstvo regulátorov, nabíjačky a ďalšie príslušenstvo). V prípade záujmu alebo akýchkoľvek otázok ma prosím kontaktujte.

Rok výroby: 2020, Stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Giodpjflk Awsfx Aftel Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2010, Stav: veľmi dobrý (použitý), Komora vnútri 2000 x 1250 x 1250 mm Vnútorný objem 2344 litrov Teplota až 400 °C (Výkon 33 kW) Predohrev / sušenie na ručné, cyklické a CNC spracovanie až po interaktívne kontúrové programovanie Gedpfx Ajuqkwfoftjil Kryté vodiace dráhy (DGP) pre vysokú dlhodobú presnosť Priamy pohon z motora na hlavné vreteno pre vysokú plynulosť chodu Obehové mazanie olejom s filtráciou pre mazanie presného ložiska hlavného vretena Kombinovaná riadiaca jednotka pre ekonomicky výhodné programovanie a prevádzku stroja, ako aj optimálny prístup k pracovnej oblasti Dĺžka: 2500 mm Šírka: 2015 mm Výška: 2900 mm Hmotnosť: 4000 kg

Stav: takmer ako nový (použitý), Rok výroby: 2013, Funkcionalita: plne funkčný, Universal milling machine Deckel FP2, repowered by FPS, year of manufacture 2013, equipped with 3-axis digital readout Heidenhain ND 780—like new!! Technical data: >> Machine No. 2202-7020, FPS No. 3364, year of manufacture 2013 >> Rigid angular table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Configuration: vertical & horizontal spindle >> Vertically and horizontally extendable quill – SK 40 >> Drawbar system S20x2 >> Weight approx. 1,100 kg Accessories and features: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication system >> 2 x emergency stop >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP2 repowered by FPS, in like-new condition. The machine is fitted with a brake motor for immediate spindle stop. Electrical central lubrication system is installed. For safety, the machine features two emergency stop switches. Year of build: 2013. Mechanically and electrically tested. The Heidenhain digital readout facilitates easier and even more precise operation. You are welcome to inspect and test the Deckel on site under power. The machine is available immediately. Gisdpfx Afjvbifgetjl

Stav: použitý, Rok výroby: 1986, Autokláv Steriflow Barriquand 1351 predstavuje nepostrádateľné riešenie pre sterilizáciu a pasterizáciu v priemyselných prevádzkach. Vďaka využitiu prehriatej vody zabezpečuje maximálnu účinnosť pri uchovávaní vašich potravinárskych a farmaceutických produktov. Tento model z roku 1986 je stále vo výbornom technickom stave a naďalej spĺňa vysoké požiadavky moderného výrobného procesu. Autokláv je vybavený šiestimi košmi, čo umožňuje spracovanie veľkého objemu. Je teda ideálny pre potreby objemovej výroby a zároveň ponúka vynikajúcu optimalizáciu energetickej spotreby. Typ B okruh zabezpečuje spoľahlivý výkon a rovnomernosť spracovania produktov. Giodpfeu Dimyex Aftel Steriflow, uznávaný výrobca profesionálneho vybavenia, navrhol tento autokláv tak, aby poskytoval nielen mimoriadnu životnosť, ale aj flexibilitu prispôsobenú rôznym procesom. Ak sa chcete dozvedieť, ako Autokláv Steriflow Barriquand 1351 môže zlepšiť vaše operácie, navštívte našu webovú stránku, kde nájdete podrobné informácie o jeho výhodách a fungovaní.

Stav: dobrý (použitý), JBT FMC Foodtech autokláv / retorta v dobrom stave s modernizovaným riadením. Prístroj pochádza priamo od európskeho výrobcu paštét. Jednodverový model, priemer 1,4 m, kapacita 6 vozíkov. Máme tiež 2 kusy štvorkolesového modelu A144 s kapacitou 4 vozíky z tej istej továrne. Gjdpfx Asrzbfceftjil

Stav: dielensky repasované (použité), Rok výroby: 1976, Universal tool milling machine Brand: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanics overhauled by us. Electrical and electronic components are excluded as they have only undergone a functionality check. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout (DRO) FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Gisdpfx Asmhfrrsftel Used as inspected The machine conforms technically to the standards of its year of manufacture.

Stav: veľmi dobrý (použitý), Glasbeek Finish Gas Powder Wall Chamber Furnace 250°C Glasbeek Finish Gas Powder Wall Chamber Furnace Maximum temperature: 250°C Electrical connection: 8 kW 51 kW 3x400V Year of manufacture: 2003 Approximate internal dimensions (W x D x H): 120 cm x 300 cm x 139 cm Including loading trolley (L 280 x W 102 cm) Gijdpod Szzgsfx Aftel Approximate external dimensions (L x W x H): approx. 380 x 220 x 305 cm Transport on request You can find more items – both new and used – in our shop! International shipping costs on request!