Zariadenie na meranie drsnosti Meracie zariadenie

Mahr MarSurf M400 SD26

Stav: pripravené na použitie (použité), Rok výroby: 2012, MarSurf M400 MarSurf SD 26 Mahr Surface Roughness Measuring Instrument with Evaluation Unit Brand: MAHR Model: MarSurf M 400 Probing System: Free probing system Measuring range (roughness): +/- 250 µm, +/- 750 µm Minimum tracing length: 1.75 mm Maximum tracing length: 17.5 mm Cut-off wavelengths: 0.25 mm, 0.8 mm, 2.5 mm Profile memory (number of single values): 40,000 pcs Profile memory (number of profiles): 30 pcs Original price: €11,190 net - Bluetooth connectivity between the drive unit and the display unit. - Measurement possible in all directions: horizontal, vertical, and overhead. You are welcome to arrange an appointment for viewing. You will receive an official invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Kdsdpfeq Nl Ewjx Afdjw All company names and trademarks mentioned are property of their respective holders and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Stav: nový, Brúsny rozsah: 3 - 28 mm Uhol nastaviteľný horizontálne: 0–180° Uhol nastaviteľný vertikálne: 0–45° Uhol nastaviteľný negatívne: 0–52° Upínací rozsah: 3 - 28 mm Otáčky: 5 200 ot./min Príkon: 230/250 Volt / Watt Priemer kotúča: 100 x 50 x 20 mm Hmotnosť stroja: cca 45 kg Rozmery (D x Š x V): 0,5 x 0,4 x 0,4 m Kdjdpsvn U Adsfx Afdew Táto brúska je ideálna na prebrusovanie náradia ako sú čelné frézy, vrtáky, WIG zváracie ihly a mnoho ďalších. Štandardné príslušenstvo: - Príslušenstvo na sústružnícke nástroje - Príslušenstvo na vrtáky - Príslušenstvo na frézovanie - Upínacia objímka 5C (4-6-8-10-12 mm) - Spojkový kľúč 38–42 - Kľúč na brúsny kotúč - Imbusové kľúče M3–M8 - Skrutkovač - Diamantový brúsny kotúč Ø 100 x 50 x 20 mm - Brúsny kotúč Ø 100 x 50 x 20 mm - Diamantový hrot - Upínacia objímka: 3/16" - 5/16" - 3/8" - 1/2"

Stav: pripravené na použitie (použité), Mahr MarSurf M 400 SD26 Surface Roughness Measuring Device Evaluation Unit Brand: MAHR Model: MarSurf M 400 Probe System: Free probe system Roughness measuring range: +/- 250 µm, +/- 750 µm Minimum traverse length: 1.75 mm Maximum traverse length: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Profile memory (number of single values): 40,000 pcs Profile memory (number of profiles): 30 pcs Original price: €11,190 net Calibration standard is not included in the scope of supply. - Bluetooth connection between drive unit and display unit. - Measurement possible in all directions: horizontal, vertical, and overhead. You are welcome to come and inspect the device. We are happy to arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Kjdpfevclcwex Afdjdw Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Stav: nový, Rok výroby: 2024, Pracovná šírka: 380 mm Pracovná výška: 150 mm 1. Agregát, rotorová skupina: Skupina 5 oscilačných rotačných kief, Ø 115 mm, každý s motorom 3 kW Kjdpfxstnf Rro Afdodw 2. Agregát, kefa: Scotch Brite Hard / priemer 210 mm, variabilný pohon Nastavenie výšky: ručné koliesko Zobrazenie výšky: mechanický počítadlo Posuvná rýchlosť: 4 - 12 m/min Výkon motora posuvu: 0,37 kW Vákuový koberec: áno Dĺžka stroja: 1400 mm Šírka stroja: 900 mm Hmotnosť: 500 kg

Stav: použitý, Rok výroby: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 - 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Front spindle bearing diameter: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret - Number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% = 11 kW) Electrical design - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. (LxWxH): 3.0 x 2.0 x 2.1 m Kjdpfju Ixwijx Afdsdw The CNC lathe is equipped with a C-axis. Distance between main spindle and tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are mounted in the magazine, 4 of which are equipped with collet chucks Coolant system, coolant supply through tool turret Control cabinet with cooling, Rittal model SK3393100 Workpiece catcher tray Machine lighting Accessories: 1x driven tool as per inventory.

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula Ksdpfx Asuxfucjfdsdw

Stav: veľmi dobrý (použitý), Rok výroby: 2013, prevádzkové hodiny: 2 670 h, Funkcionalita: plne funkčný, dĺžka sústruženia: 406 mm, sústružnícky priemer: 305 mm, otvor vretena: 59 mm, maximálna rýchlosť vretena: 6 000 ot./min, výkon motora vretena: 11 200 W, priemer otáčania nad priečnym suportom: 419 mm, celková hmotnosť: 3 580 kg, prechod tyče: 44 mm, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, Popis CNC sústruh HAAS ST-10 – Rok výroby 2013 s iba 2 670 prevádzkovými hodinami. Stav: veľmi dobrý Prevádzkové hodiny: len 2 670 h Miesto uskladnenia: Graz Fotografie/videá: Fotografie a videá zariadenia budú na požiadanie radi zaslané Technické údaje: Výrobca: HAAS Model: ST-10 Kdsdpfoug H Svox Afdow Rok výroby: 2013 Ovládanie: HAAS CNC Priemer sústruženia: 305 mm Dĺžka sústruženia: 406 mm Max. priemer obrobku: 419 mm Veľkosť skľučovadla: 165 mm Priemer priechodu tyče: 44 mm Priemer vretena: 58,7 mm Upínacia plocha vretena: A2-5 Otáčky vretena: 6 000 ot/min Výkon pohonu: 11,2 kW Rýchlosť posuvu X/Z: 30,5 m/min Revolver: 12 pozícií nástrojov Kužeľ koníka: MT3 Celková hmotnosť: 3 580 kg Rozmery: 3 200 x 1 600 x 2 200 mm (D x Š x V) Zahrnuté vybavenie: Hydraulické skľučovadlo Dopravník triesok / odsávanie triesok HAAS riadenie s intuitívnym ovládacím rozhraním Stav stroja a oblasti využitia: Tento HAAS ST-10 ponúka vynikajúci pomer výkonu, presnosti a spoľahlivosti. Ideálny pre malé a stredne veľké série, výrobu prototypov a presné sústružnícke diely. Stroj je ihneď pripravený na nasadenie. Stroj sa nachádza v Grazi a je vo výbornom stave. Obhliadka stroja je možná priamo na mieste alebo prostredníctvom videohovoru po dohode.

Stav: použitý, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Kdjdpfxouwv H Ts Afdjw As the world’s leading company in the field of Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA grinding software - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B axis) Standard Equipment: - Workheadstock with Morse taper MK5, optional MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measurement system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at additional cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece headstock - Measurement control - Extraction unit - Paper band filter Control: Basic grinding cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Infeed sensor GAP - Dressing diamond measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stav: takmer ako nový (použitý), Rok výroby: 2018, prevádzkové hodiny: 2 350 h, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, dopravník triesok, otáčky plynule nastaviteľné, Použitý vertikálny obrábací stroj so 4 osami QUASER MV 184 C je stredne veľký vertikálny CNC obrábací stroj s liatinovou konštrukciou a valčekovými lineárnymi vedeniami pre stôl. Zdvihy: X 1020 mm, Y 610 mm, Z 610 mm; rozmery stola 1200×600 mm, max. zaťaženie stola 500 kg. Je vybavený 4. kontinuálnou osou TJR HR 255N s príslušným lunetovým oporníkom a frézovaným stolom s T-drážkami. Vreteno ISO-40 (DIN 69871) s otáčkami 10 000 rpm (maximálny výkon 18 kW), chladené špeciálnym chladiacim zariadením, vysokotlakové chladenie cez vreteno, náhodne radený menič nástrojov s výmenným ramenom pre 30 pozícií, prednastavovač nástrojov RENISHAW TS 27, bezdrôtová dotyková sonda na obrobok RENISHAW a pásový dopravník triesok. Rok výroby jún 2017 (inštalácia 2018), s CNC FANUC MILL I s farebným LCD, Manual Guide i, diaľkovo ovládaný elektronický ručný kolieskový ovládač, s USB portom, RS232 sériový port, slot na pamäťovú kartu a odsávanie hmly FILTERMIST. Stroj v PERFEKTNOM STAVE, iba 2 350 hodín rezania, možnosť rôznych prídavných zariadení. Kdedsxf Nbrepfx Afdow

Stav: nový, Rok výroby: 2025, celková dĺžka: 1 450 mm, celková šírka: 800 mm, celková výška: 1 800 mm, celková hmotnosť: 500 kg, výkon: 4,75 kW (6,46 k), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Kdjdpfxjt D D Nzj Afdsw Dimensions: 1450x800x1800 mm, Weight: 500 kg