Spätné vedenie panelov

MAHROS SPINNER

Stav: neskontrolované (použité), Rok výroby: 2016, Funkcionalita: neoverené, maximálna hrúbka hrany: 22 mm, otáčky (max.): 12 000 ot./min, Výbava: Označovanie CE, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 Dodpfxsyxndbj Ad Njur End trimming unit IN-801 Number of motors: 2 Top and bottom trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and radius unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Buffing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7673

Stav: neskontrolované (použité), Rok výroby: 2012, Funkcionalita: neoverené, šírka rezania (max.): 4 500 mm, posuv osi X: 140 m/min, dĺžka sekcie (max.): 2 200 mm, Výbava: Označovanie CE, dávkovač, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter of saw unit: 380 mm Maximum tool diameter of scoring unit: 200 mm Saw blade projection: 95 mm Number of longitudinal saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Connected load saw unit 1: 15 kW Connected load saw unit 2: 15 kW Connected load scoring unit 1: 2.2 kW Connected load scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking Djdpfx Adjyxn Ado Neur The machine is sold and delivered in its actual and legal condition ("as seen and approved"), on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and the use of the machine at the destination. External reference: 5711

Stav: neskontrolované (použité), Rok výroby: 2014, Funkcionalita: neoverené, výška obrobku (max.): 60 mm, maximálna hrúbka hrany: 20 mm, posuv osi X: 30 m/min, model regulátora: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner trimming unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Dujdpfxsyzy Iwo Ad Nsr Unit: Rounding unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for rolls Melt adhesive tank Pressure roller unit for the edge Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 6089

Stav: neskontrolované (použité), Rok výroby: 2006, Funkcionalita: neoverené, otáčky (max.): 2 970 ot./min, dĺžka obrobku (max.): 2 500 mm, šírka obrobku (max.): 1 000 mm, Výbava: Označovanie CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Dodpfxjyzy T Te Ad Nsur Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressing elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual technical and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the installation site. External reference: 6157

Stav: neskontrolované (použité), Rok výroby: 2006, Funkcionalita: neoverené, pojazdová vzdialenosť osi X: 4 400 mm, zdvih osi Y: 1 300 mm, posuv osi X: 40 m/min, posuvová rýchlosť osi Y: 45 m/min, Výbava: Označovanie CE, The machine has the following configuration: Drilling groups: Upper group with 30 vertical and 6 horizontal spindles Milling group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, located at the working head TECHNICAL DETAILS Travel distance X-axis: 4,400 mm Travel distance Y-axis: 1,300 mm Maximum workpiece through-feed height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Individual vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with suction bars Number of suction bars: 8 Vacuum clamping for workpiece CE safety standards Dodeyzy S Nepfx Ad Neur Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Stav: použitý, číslo stroja/vozidla: 007234, Max. šírka panelu: 900 mm Max. dĺžka panelu: 1200 mm Dĺžka dopravníka: 8000 mm Duodpfx Ajwlpnnod Njr Zariadenie na spätný chod dielcov pre olepovačku hrán: vľavo

Rok výroby: 2007, stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, dĺžka obrobku (max.): 2 000 mm, šírka obrobku (max.): 800 mm, dĺžka dopravného pásu: 5 700 mm, Výbava: Označovanie CE, Žiadna minimálna cena – zaručený predaj najvyššiemu záujemcovi! TECHNICKÉ ÚDAJE Max. šírka obrobku: 800 mm Min. dĺžka obrobku: 140 mm Max. dĺžka obrobku: 2 000 mm Dĺžka dopravníka: 5 700 mm DETAILY STROJA Rozmery (d x š): 5 700 x 1 000 mm VYBAVENIE Spätný tok dielov pre olepovačku hrán vľavo Vysun panela s lavicou s vzduchovou clonou Posuv panela s motorizovaným dopravníkom Dsdpfxoxxafbs Ad Njur Označenie CE