Odťahové vozidlo

MAN 18.290 BL Baumaschinentransporter 7,30m NL 8,8to

Stav: použitý, najazdené kilometre: 24 510 km, výkon: 213 kW (289,60 k), prvá registrácia: 03/2022, celková hmotnosť: 18 000 kg, typ paliva: nafta, farba: červená, konfigurácia náprav: 2 nápravy, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, Nearly new and exceptionally well-maintained 18-ton MAN TGM 18.290 construction machinery carrier TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction machinery transport; single owner; operated under a MAN maintenance comfort contract; only 24,510 km. Truck Specifications: - Short CC cab Djdpfxexhat Dj Afajcn - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - MAN TipMatic 12.12. OD automatic transmission - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program - Front axle leaf-sprung, rear axle air-suspended - Rear axle differential lock - Front axle 7,500 kg; rear axle 11,500 kg; technical capacity rear axle 12,000 kg - Stabilizer bars front and rear - Shock absorbers front and rear - Axle ratio i = 4.11 - Full brake assist - Disc brakes on front and rear axles - Emergency brake assist (EBA) - Lane departure warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill hold system - Lane departure warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacons on the cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED contour lights - Electrically adjustable and heated exterior mirrors - Electric windows - Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment - MAN Media System 7-inch - German vehicle from first owner - Excellent, well-maintained condition - Operated under MAN maintenance comfort contract - Regular service documentation available Möller Transport System Specifications: - Construction machine transport platform approx. 7.30 m long x 2.48 m wide - Aluminum dropsides approx. 0.40 m high - Dropside length approx. 5,600 mm to the ramp - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for loading - Outer frame with slanted design, continuous hole pattern for securing loads – usable as lashing points, tested according to DIN-EN 12640 and up to 2,000 kg - 8 additional Thiele lashing rings integrated into the outer frame - Aluminum side forklift impact guard, bolted - Grating floor for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - "Igel" set on the front wall for securing load equipment - 8 mm phenolic plywood plate in front of front wall as wear protection - Stake system - Kinnegripp - Fixed corner stanchions at the front - 2 removable and foldable center stanchions per side (right and left) - 2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm - 2 LED work lights in the front wall, protected installation with switch in cab - 2 support feet with carrying straps in individual holders - Plastic half-shell mudguards for 2nd axle with mud flaps - Constant pump 40 L/min - Aluminum hydraulic tank 60–80 liters - 1 pair of hydraulic folding ramps mounted at the rear, 2-part, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulically foldable, grating design - Ramp operation via separate control block at the right rear of the vehicle in a protected design - 2 pairs of foldable auxiliary supports at rear - Ball head coupling + 12 volts Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available on request. All details without guarantee. Subject to errors and interim sale.

Stav: použitý, najazdené kilometre: 24 510 km, výkon: 213 kW (289,60 k), prvá registrácia: 03/2022, celková hmotnosť: 18 000 kg, typ paliva: nafta, farba: červená, konfigurácia náprav: 2 nápravy, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, Nearly new and exceptionally well-maintained 18-ton MAN TGM 18.290 construction machinery carrier TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction machinery transport; single owner; operated under a MAN maintenance comfort contract; only 24,510 km. Truck Specifications: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - MAN TipMatic 12.12. OD automatic transmission - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program - Front axle leaf-sprung, rear axle air-suspended - Rear axle differential lock - Front axle 7,500 kg; rear axle 11,500 kg; technical capacity rear axle 12,000 kg - Stabilizer bars front and rear - Shock absorbers front and rear - Axle ratio i = 4.11 - Full brake assist - Disc brakes on front and rear axles - Emergency brake assist (EBA) - Lane departure warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill hold system - Lane departure warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacons on the cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED contour lights - Electrically adjustable and heated exterior mirrors - Electric windows - Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment - MAN Media System 7-inch - German vehicle from first owner - Excellent, well-maintained condition - Operated under MAN maintenance comfort contract - Regular service documentation available Djdpfx Aexhatqsfascn Möller Transport System Specifications: - Construction machine transport platform approx. 7.30 m long x 2.48 m wide - Aluminum dropsides approx. 0.40 m high - Dropside length approx. 5,600 mm to the ramp - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for loading - Outer frame with slanted design, continuous hole pattern for securing loads – usable as lashing points, tested according to DIN-EN 12640 and up to 2,000 kg - 8 additional Thiele lashing rings integrated into the outer frame - Aluminum side forklift impact guard, bolted - Grating floor for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - "Igel" set on the front wall for securing load equipment - 8 mm phenolic plywood plate in front of front wall as wear protection - Stake system - Kinnegripp - Fixed corner stanchions at the front - 2 removable and foldable center stanchions per side (right and left) - 2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm - 2 LED work lights in the front wall, protected installation with switch in cab - 2 support feet with carrying straps in individual holders - Plastic half-shell mudguards for 2nd axle with mud flaps - Constant pump 40 L/min - Aluminum hydraulic tank 60–80 liters - 1 pair of hydraulic folding ramps mounted at the rear, 2-part, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulically foldable, grating design - Ramp operation via separate control block at the right rear of the vehicle in a protected design - 2 pairs of foldable auxiliary supports at rear - Ball head coupling + 12 volts Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available on request. All details without guarantee. Subject to errors and interim sale.

Stav: použitý, najazdené kilometre: 24 510 km, výkon: 213 kW (289,60 k), prvá registrácia: 03/2022, celková hmotnosť: 18 000 kg, typ paliva: nafta, farba: červená, konfigurácia náprav: 2 nápravy, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, Nearly new and exceptionally well-maintained 18-ton MAN TGM 18.290 construction machinery carrier TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction machinery transport; single owner; operated under a MAN maintenance comfort contract; only 24,510 km. Truck Specifications: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - MAN TipMatic 12.12. OD automatic transmission - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program - Front axle leaf-sprung, rear axle air-suspended - Rear axle differential lock - Front axle 7,500 kg; rear axle 11,500 kg; technical capacity rear axle 12,000 kg - Stabilizer bars front and rear - Shock absorbers front and rear - Axle ratio i = 4.11 - Full brake assist - Disc brakes on front and rear axles - Emergency brake assist (EBA) - Lane departure warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill hold system - Lane departure warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacons on the cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED contour lights - Electrically adjustable and heated exterior mirrors - Electric windows - Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment - MAN Media System 7-inch - German vehicle from first owner - Excellent, well-maintained condition - Operated under MAN maintenance comfort contract - Regular service documentation available Möller Transport System Specifications: - Construction machine transport platform approx. 7.30 m long x 2.48 m wide - Aluminum dropsides approx. 0.40 m high - Dropside length approx. 5,600 mm to the ramp - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for loading - Outer frame with slanted design, continuous hole pattern for securing loads – usable as lashing points, tested according to DIN-EN 12640 and up to 2,000 kg - 8 additional Thiele lashing rings integrated into the outer frame Dedexharyepfx Afaocn - Aluminum side forklift impact guard, bolted - Grating floor for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - "Igel" set on the front wall for securing load equipment - 8 mm phenolic plywood plate in front of front wall as wear protection - Stake system - Kinnegripp - Fixed corner stanchions at the front - 2 removable and foldable center stanchions per side (right and left) - 2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm - 2 LED work lights in the front wall, protected installation with switch in cab - 2 support feet with carrying straps in individual holders - Plastic half-shell mudguards for 2nd axle with mud flaps - Constant pump 40 L/min - Aluminum hydraulic tank 60–80 liters - 1 pair of hydraulic folding ramps mounted at the rear, 2-part, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulically foldable, grating design - Ramp operation via separate control block at the right rear of the vehicle in a protected design - 2 pairs of foldable auxiliary supports at rear - Ball head coupling + 12 volts Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available on request. All details without guarantee. Subject to errors and interim sale.