Vertikálne obrábacie centrum

Matsuura MAM72-25V PC 2

Used 5-axis vertical machining center, year of manufacture 2007 / SN17224 / Control ON-time: 66,963 hours

Control System
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travel
X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: Ø250 x height 250 mm
Max. pallet load: 40 kg
Pallet interface: Capto C6

Spindle
Speed range (standard): 50 – 15,000 rpm
Spindle taper with face contact: BT 40 JIS B 6339 Big+
Spindle motor power with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Feed and Positioning Speeds
Rapid traverse:
Rapid traverse X, Y, and Z-axes: 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Feed rates:
X, Y, and Z-axes: 1 - 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter with all positions filled: Ø96 mm
Max. tool diameter with adjacent positions free: Ø150 mm
Max. tool length: 300 mm

Guides
Axes guides: Roller guides
Lubrication: Permanent grease lubrication
Ball screws
Ball screw diameter X, Y, and Z-axes: Ø36 mm
Pitch: 16 mm

Axis Drives
Power X, Y, and Z-axes: 4.5/4.5/5.5 kW
Power B- and C-axes: 4.5/2.5 kW
Axial force X, Y, and Z-axes: kN

Space Requirements* (Standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
*Dimensions may differ on the existing machine!

Machine Weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Connection Values
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Supply voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 - 9.5 bar
5-axis simultaneous control


Expansion of tool magazine capacity from standard 30 to 40 tool positions

Pallet changer with 2 pallets, 130 mm diameter

Direct measuring system (Heidenhain)
on X, Y, and Z-axes, supplied with purge air
Hfjdpowwk Dzefx Aguon

Coolant systems
KNOLL coolant system, consisting of*:

- 1 scraper belt or hinged belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010)
- 1 through-spindle coolant supply with coolant pump KTS25-50T, capacity 31 l/min at 70 bar, 5.5 kW, coolant pressure adjustable in 3 stages
- 1 external cooling with coolant pump, capacity 100 l/min at 1.4 bar
- 1 coolant shower with coolant pump, capacity 100 l/min at 1.4 bar
- 1 compact filter KF200, filtration capacity 200 l/min
- 2 spiral chip conveyors in the machine, standard option

Measuring Equipment in the Machine

- RENISHAW OMP 60 probe for automatic zero-point setting and workpiece measurement, can be inserted into the spindle via tool changer
- OMRON pressure gauge for tool length measurement and tool breakage monitoring

Subject to prior sale and technical data/description changes and errors!

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.