Jednostojanová páková lis, excentrický pákový lis, excentrický lis, C-rámová raziaca lis

MAY - MAYPRES - KOMATSU MKN 1-63/6

Stav: takmer ako nový (použitý), Rok výroby: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Max. working area square: 170x170 mm Max. working area flat: 300x150 mm Max. working area round: 200 mm Saw feed rate: 0 – 40 mm/s, steplessly adjustable Cut-off length: 5-950 mm (9999 mm with multiple stroke) Max. feed speed: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After completion of the retrofit, the machine is in an as-new condition, both technically and visually. Thanks to its equipment and design, the machine is highly efficient and suitable for a wide range of applications. The programmed HMI control ensures simple and very cost-effective operation. The soundproof cabin reduces noise emissions to a minimum. The machine is fully overhauled in our workshop upon customer request. The following components, among others, are renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator interface - Replacement of ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve block - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine features: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all systems for all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Multi-piece clamping device for parallel sawing of multiple workpieces Nedpfsuiy Hrex Alcslg - Flat magazine for automatic feeding of pre-materials up to 6 m in length - Roller conveyors for pre-material - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your staff

Stav: generálne opravený (použitý), Rok výroby: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Max. saw blade diameter: 500 mm Motor power: 4.0 kW Saw blade feed: 0-40 mm/s, infinitely adjustable Electronic saw height control Working area, square at 90° max.: 130 x 130 mm Working area, flat at 90° max.: 190 x 130 mm Working area, round at 90° max.: 170 mm The machine has been completely overhauled in our workshop and is in like-new condition. Among other things, the following work was performed: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Retrofit to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Extraction performance optimized New minimal quantity lubrication system Replacement of general wear and tear parts Overhaul of the enclosure Nlsdpfxjuiy Nge Alcsg The machine is additionally equipped with: Minimal quantity lubrication Spacer extension (for high-quality cut surfaces without return marks) Preload magazine for careful handling of painted/anodized surfaces Scrap piece ejection integrated in the pusher Folding scrap piece tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of multiple workpieces Online support connection Delivery and installation at your facility Staff training

Stav: použitý, Rok výroby: 1988, číslo stroja/vozidla: 724306, Pressure: 63 t Stroke rate: 400 strokes/min Sheet width: 180 mm Stroke: 10 - 80 mm Feed length: 150 mm Strip width: 180 mm Control: KAISER Voltage: 380 V Space requirements approx.: 1.85 x 2.70 x 3.00 m Nledpscxxt Tofx Alcsg + Original Kaiser gripper feeder model ZR 18 D

Stav: použitý, Pressure 55 t Outreach 250 mm Stroke 10-90 mm Table size 640 x 495 mm Stroke rate 120 strokes/min Ram adjustment 55 mm Ram surface 290 x 210 mm Ram bore 40 H7 mm Drop-through opening in table 220 x 190 mm T-slots 22 mm Nlsdpfx Ajcp Apyelcog Clamping plate 620 x 485 x 65 mm Total power requirement 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Electrically adjustable table height - Mechanical overload protection in the ram (shear pin) - Control cabinet with touchscreen - Foot switch

Stav: použitý, Rok výroby: 1996, Pressure 80 t Outreach 320 mm Stroke 6 - 118 mm Strokes per minute 30 - 80 Ram adjustment 70 mm Table surface 830 x 610 mm Ram surface 650 x 400 mm Frame gap (to the rear) 630 mm Total power requirement kW Machine weight approx. 8.1 t Space requirements approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for through-hole - stepless speed control via frequency inverter Nledpfxjtycdkj Alcjg - The machine is technically inspected and overhauled in our workshop and will be equipped with a new control cabinet featuring safety controls and touchscreen - Current UVV inspection with brake time measurement

Stav: pripravené na použitie (použité), K dispozícii je stroj na rovnanie a strihanie drôtu Wafios s rovnacím nadstavcom dĺžky 1000 mm. Rozsah priemeru drôtu: 1,5 mm–7 mm, rozsah dĺžky strihu: 20 mm–3000 mm, otáčky rovnacieho telesa: 6800 ot./min, delenie: 71/69, počet strihov: 270/min, rozmery stroja (X/Y/Z): cca 3300 mm/1200 mm/1800 mm, hmotnosť: cca 1400 kg. Možná je obhliadka na mieste. Nljdpfeyvuuzjx Alcog

Rok výroby: 1981, stav: použitý, Pressure: 63 t Njdpfx Aolp U R Iolcslg Stroke: 6–60 mm Stroke rate: 90–550 strokes/min Installation height (below), ram adjustment (above): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram bore diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight: approx. 8 t Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Stav: generálne opravený (použitý), Rok výroby: 2023, SACMA SP22 PROGRESÍVNY STUDENÝ LIS 2 MATRICE, 2 RAZNÍKY Kompletne repasovaný - Ako nový (v súlade s normami CE) S nainštalovanou polopriebežnou skupinou ROZSAH PRODUKCIE: Priemer: 10x100 Nodpepgw Ugefx Alcolg Typ stroja: 2 matrice – 2 údery transferový header Rozsah priemerov: 10 mm Počet matíc: 2 Počet staníc (vrátane odrezávania): 3 Dĺžka strihu: 110 mm Dĺžka drieku pod hlavou: 100 mm Výkon – kusov/min: 170

Rok výroby: 2007, stav: pripravené na použitie (použité), K dispozícii je CNC obrábacie centrum na ohýbanie drôtov a rúr značky Wafios. Osy: 9, rozsah priemerov drôtu: 1,5 mm – 8 mm, rozsah priemerov rúr: 3 mm – 10 mm, nástroje na drôt: 2,5 mm/4 mm/5 mm, nástroje na rúry: 6 × 1 mm, rýchlosť posuvu: 120 m/min, páry valcov na posuv: 3, minimálny/maximálny priečny zdvih ohýbacieho hlavu: -200 mm/200 mm, minimálny/maximálny zdvih ohýbacieho hlavu: -120 mm/25 mm, orientácia ohýbacieho hlavu: 0°/30°, rozsah dĺžok spätného pohybu: 400 mm – 1300 mm, ohybový moment: 520 Nm, deformačná sila: 10 kN. Rozmery stroja X/Y/Z: približne 3500 mm/1800 mm/2300 mm, hmotnosť: približne 5800 kg. Dokumentácia je k dispozícii. Je možná obhliadka priamo na mieste. Nledszka Nwjpfx Alceg

Stav: použitý, Rok výroby: 2014, Vhodné na odsávanie olejovej hmly. Njdpfxjwnprxs Alcolg Menovitý objemový prietok: 950 m³/h Hladina hluku: 71 dB(A) Otáčky: 2850 ot/min Rozmery (Š x H x V) cca: 525 x 592 x 781 mm Hmotnosť cca: 55 kg Príkon cca: 0,75 kW (400 V / 50 Hz) Farba: Sivá