Automatická pásová píla, rok výroby 2008, MEBA

MEBA eco 335 A

Stav: dobrý (použitý), Rok výroby: 2000, číslo stroja/vozidla: 6535, Offer 25230 Hydraulic Two-Column Guided Automatic Bandsaw Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, manual miter adjustment with hydraulic clamping - Automatic material feed unit, motorized miter adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed: steplessly adjustable, 15–150 m/min - Cutting pressure regulation: stepless, 10–15 bar - Descent speed: 0–300 m/min - Cutting capacity: at 90° - Round: 335 mm - Square/flat: 500 x 335 mm Hsdpow I Scfefx Ahmjnn - Material feed length: 5–2300 mm - Drive: 400 V / 6.5 kW - Space requirements: approx. W 2400 x H 1950 x D 2200 mm - Weight: approx. 1800 kg

Stav: dobrý (použitý), Rok výroby: 2018, číslo stroja/vozidla: 68892, Offer 26014 Hydraulic Two-Column Guided Mitre Bandsaw Automatic Technical Data: - Automatic cutting cycle, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping Hnjdpfoytn Diox Ahmjn - Automatic material feed, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed, steplessly adjustable: 15 - 150 m/min - Cutting pressure regulation, stepless: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: 30° - 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Floor space requirement (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Stav: použitý, Rok výroby: 2006, Minimálna výška pásu: 80 mm, maximálna 1220 mm. Výška pásnic: min. 42 mm, max. 600 mm. U-profily: min. 80 mm, max. 1200 mm. Výška pásnic pri U-profiloch: min. 45 mm, max. 300 mm. L-profily (uhly): min. 80 x 80 x 8 mm, max. 300 x 300 x 50 mm. Ploché materiály: min. 100 mm, max. 1220 mm. Štvorcové rúry: min. 80 x 80 mm, max. 600 x 600 mm. Obdĺžnikové rúry: min. 80 x 40 mm, max. 1200 x 600 mm. Maximálna hmotnosť polohovaného kusu: 15 000 kg. Maximálna lineárna hmotnosť profilu: 750 kg/m. Maximálna rýchlosť saní: 30 m/min. Počet vŕtacích hláv: 3 - Dve horizontálne vŕtacie hlavy s jednovretennom - Jedna vertikálna vŕtacia hlava s jednovretennom Maximálny priemer vŕtania: 50 mm - s kužeľovým adaptérom č. 4 Hnedex N Iclopfx Ahmon Maximálna hrúbka vŕtania: 75 mm Motor vretena na každú hlavu (AC): 15 kW Otáčky vretena (plynulé ovládanie programom): 180 – 3000 ot./min. Posuvný zdvih podľa osovej linky: vertikálna jednotka 20 až 1200 mm, horizontálne jednotky 10 až 600 mm VÝMENA NÁSTROJOV: - Počet zásobníkov nástrojov: 3 - Počet meniteľných nástrojov: 6 - Veľkosť adaptéra: ISO 45 Model 1260 BH pre delenie profilov za studena: - Kapacita rezu pri 90°: min. 80 x 10 mm, max. 1250 x 600 mm - Kapacita rezu pri 45°: 800 x 600 mm - Kapacita rezu pri 60°: 500 x 500 mm - Motor pásovej píly: 11 kW - Rýchlosť pílenia: 20 – 100 m/min - Rozmer pílového pásu: 67 x 1,6 mm

Stav: pripravené na použitie (použité), Rok výroby: 1993, Funkcionalita: plne funkčný, vstupné napätie: 400 V, pohotovostná hmotnosť: 6 000 kg, výkon čerpadla chladiacej kvapaliny: 180 W, dĺžka pílového pásu: 7 600 mm, šírka pásovej píly: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Bandsaw Metalworking | Series Production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic, horizontal CNC bandsaw designed for metalworking, tailored for heavy industrial applications and series production. Its robust construction with a machine weight of 6,000 kg and proven AMADA technology ensure stable, precise, and repeatable cutting results. Main advantages: ● Fully automatic CNC bandsaw for metal ● AMADA – Industrial quality ● Heavy-duty construction, machine weight 6,000 kg ● Rigid machine frame for vibration minimization ● Saw motor 7.5 kW ● Hydraulic band tensioning ● Industrial saw blade 7600 × 50 × 1.6 mm ● Modern CNC control with automatic cutting cycles ● Ideal for series and continuous operation ● Suitable for solid material, profiles, and material bundles Technical data ● Control: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush: 200 W ● Saw blade dimensions: 7600 × 50 × 1.6 mm ● Band tension: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6,000 kg Condition: used, fully functional, ready for operation 📩 Contact us for price and further technical information. Hsdpfx Aheyc H H Ujmenn

Stav: dobrý (použitý), Rok výroby: 2016, Funkcionalita: plne funkčný, Automatická CNC pásová píla s pojazdom vozíka 500 mm Hsdporqgrdsfx Ahmenn

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Rok výroby: 2006, celková hmotnosť: 11 000 kg, celková dĺžka: 18 800 mm, celková šírka: 4 310 mm, nosnosť: 20 000 kg, hlavná rýchlosť zdvihu: 4 mm/min, pracovná výška: 8 000 mm, Výbava: dokumentácia / manuál, Overhead Crane Konecranes – Type: double girder – Capacity: 20,000 kg – Lifting height: 8 m – Year of manufacture: 2006 Hnsdpfxjyrr D De Ahmen – Type of hoist: wire rope hoist – Brand: Konecranes Dimensions – Span: 18,800 mm center-to-center – Installation height: 840 mm – Total width: 4,310 mm – Wheelbase: 3,800 mm – Suitable for crane rail: A65 / 60×40 / 60×30 – Own weight: approx. 11,000 kg Speeds – Lifting: up to 4 m/min (stepless) – Trolley travel: up to 20 m/min (stepless) – Crane travel: up to 32 m/min (stepless) Features – Control: radio remote control – Crane documentation available: yes – Electrical diagrams available: yes – Condition: in good condition. – Dismantled: yes, immediately available Optional – Crane power supply – Transport to your location (unloaded or offloaded with truck-mounted crane) – Customization of crane by NEN-EN 1090 certified fabrication company

Stav: dobrý (použitý), Rok výroby: 1985, Funkcionalita: plne funkčný, rok poslednej generálnej opravy: 2012, BEHRINGER HBP650A pásová píla !PREDAJ NA MIESTE! !Stroj si môžete prezrieť na mieste pod prúdom! Hsdeylbf Repfx Ahmsnn Výrobca: BEHRINGER Model: HBP 650 A Rok výroby: 1985 / generálna oprava 2012 Technické údaje Rezací rozsah: 650 mm Minimálna dĺžka rezu: 10 mm Rezacia rýchlosť: 17 až 100 m/min Objem chladiacej kvapaliny: 200 l Tlak pásu/zařízení: 80 bar Výkon motora pohonu píly: 7,5 kW Výkon motora hydraulického čerpadla: 2,2 kW Výkon motora čerpadla chladiacej kvapaliny: 0,12 kW Výkon motora dopravníka triesok: 0,09 kW Celkový pripojovací výkon: 18 kW Rozmery pílového pásu: 8800 x 54 x 1,6 mm Rozmery Dĺžka x šírka x výška: 4320 x 2290 x 2740 mm Hmotnosť: 6500 kg

Stav: pripravené na použitie (použité), Rok výroby: 2006, Funkcionalita: plne funkčný, typ ovládania: CNC riadenie, celková hmotnosť: 6 300 kg, rok poslednej generálnej opravy: 2025, stupeň automatizácie: automatický, AMADA HFA 530 CNC – Fully Automatic CNC Bandsaw Overhauled in 2025 | Immediately Ready for Operation The AMADA HFA 530 CNC is a fully automatic CNC bandsaw designed for precise metal cutting, series production, and heavy-duty industrial applications. Thanks to its robust construction with a machine weight of 6.3 tons and state-of-the-art CNC control, this machine ensures stable, accurate, and repeatable cutting results. Main Features and Advantages: ● Fully automatic CNC bandsaw for metalworking ● Completely overhauled in 2025 – machine ready for immediate use ● Heavy, stable construction with a machine weight of 6.3 t and low center of gravity ● Rigid machine frame for minimized vibration and improved cut quality ● Large cutting capacity: - Round material up to Ø 530 mm - Square/rectangular material up to 530 × 530 mm ● Hydraulic blade tensioning ensures consistent cutting accuracy and long blade life ● Infinitely variable blade speed via frequency inverter (15–120 m/min) ● Table load capacity up to 4000 kg – ideal for heavy workpieces ● Minimum cut length of 10 mm, optimal for series and batch production ● Modern CNC control: ● Simple and quick programming ● Automatic sawing cycles ● High productivity and repeatability Technical Data: ● Cutting capacity: - Round material: 30–530 mm - Rectangular material (W × H): 30 × 30 – 530 × 530 mm ● Table load: 4000 kg ● Saw blade dimensions: 67 × 1.6 × 6670 mm ● Blade speed: 15–120 m/min, frequency-controlled ● Blade tensioning: hydraulic ● Power supply: 400 V ● Minimum cut length: 10 mm ● Control: CNC ● Connected load: 13 kW ● Machine weight: 6.3 t Condition & Availability: Hnodpfoyat Utex Ahmon ● Machine overhauled in 2025 ● Fully functional and tested ● Immediately available Contact us for pricing, inspection, or further technical details.

Stav: veľmi dobrý (použitý), Rok výroby: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC rezacia / vŕtacia linka – rok 2012. Rozdelený systém. 3 vretená. Automatická výmena nástrojov. 24 metrov vstupného posuvu. 18 metrov výstupného posuvu. Merací systém podávacieho uchopovača. Priečne transfery na vstupe a výstupe. Hnodpfxex Ruude Ahmen

Rok výroby: 2009, stav: použitý, číslo stroja/vozidla: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING-DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling system combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. Hnsdpfxoymy Ime Ahmen This drilling and sawing system is ideally suited for the efficient cutting, drilling, center punching, marking (scribing), and thread cutting of profiles and flat bars in steel construction and steel trade. The Kaltenbach KDX-S drilling unit is equipped with 3 drilling spindles, each with 26 kW drive power and a five-station tool changer per unit. The Kaltenbach M150 length measuring system (measuring trolley) is designed together with the T13 transport system for profile lengths up to 18 m. The comprehensive material handling system for profile steel also features infeed and outfeed cross conveyors for transverse profile transport. The CNC control together with Kaltenbach Profiline III software allows for data processing in DSTV and DXF formats. The complete system offers an ergonomic working height of 640 mm from material level to the top edge of the floor, providing the operator with excellent oversight. Removal of offcuts or further transport of the profile to the discharge area is performed by a gripper after the saw. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw and drilling system combination consists of: PROFILE STEEL DRILLING UNIT Kaltenbach KDX-S 1015 MITRE BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING SYSTEM Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13