Brúska na povrch

Mikromat SFW 200 PA 2

Stav: vyžaduje opravu (použité), Machine number: 1464 Iedpfx Aced Hl Stj Hsik Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed rate longitudinal: 6.3 to 1,250 mm/min Feed rate cross: 6.3 to 1,250 mm/min Connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stav: použitý, Rok výroby: 1996, Grinding length: 600 mm Iiodpfxst Tqrnj Ac Hok Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Max. table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter.

Stav: použitý, Olejom mazaná rotačná lamelová vákuová pumpa Výrobca: Busch Typ: RC 1000 B Iodpfx Acscu Tirj Hsik Stav: Generálne opravená Záruka: 12 mesiacov Sací výkon: cca 1000 m³/h Konečný tlak: cca 20 mbar Prevádzková náplň: minerálny olej (v cene) Dodacia lehota: 2 týždne

Stav: použitý, Rok výroby: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total power requirement 5.5 kW Machine weight approx. 2,500 kg Space requirement approx. m J U N G Horizontal precision surface and profile grinding machine Type HF 50 RD Year of manufacture approx. 1969 Machine no. 4082 _____ Max. grinding length 500 mm Max. grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel dimensions 225 x 25 x 51 mm Grinding wheel speed stepless 1,000 – 4,500 rpm Vertical feed 0.001 – 0.01 mm/stroke Stepless grinding spindle drive GS 0.5 – 1.5 kW Isdpfx Acst Hwzis Hoik Total drive approx. 6 kW – 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special equipment • This design is particularly suitable for grinding high-alloy tool steels due to the stepless speed range. • Automatic feed of the grinding slide in surface and profile grinding operations with automatic infeed shutoff via a contact dial gauge, including dial gauge holder and dial gauge for height control. • Machine adjustable for conventional grinding operations with or without infeed, with continuous cross feed or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and belt filter • Separate converter cabinet for stepless speed control and with cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid traverse grinding head Condition: good – ready for demonstration under power, partially overhauled by specialist (piston rods, lubrication, feed, dresser, bellows, etc.) Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Stav: pripravené na použitie (použité), X-axis: 500 mm, Y-axis: 400 mm, Z-axis: 350 mm, quill stroke: 50 mm, spindle speed: 20–5000 rpm, connected load: 10 kVA, control: Maho CNC 432, length: 2,022 mm, width: 3,030 mm, height: 1,915 mm, weight: 2.1 t, operating hours: 29,578 h, with documentation, without spare parts. Mechanically and electrically the machine operates flawlessly. The control elements were recently overhauled. Iedpfx Askn R Dhsc Hoik

Stav: dobrý (použitý), x-pojezd 410 mm Iijdpfx Asi Elydsc Hok y-pojezd 310 mm z-pojezd 400 mm Upínací kužel hlavního vřetena SK 40 Upínací plocha stolu 700 x 280 mm Otáčky 45 - 2000 ot/min Výsuv pinoly 63 mm Celkový příkon 2,2 kW Hmotnost stroje cca 1300 kg Prostorové nároky cca 2,1 x 2,1 x 1,7 m Napětí 400 V Tříosý digitální odměřovací systém Heidenhain Pevný úhlový stůl Zařízení na chlazení Vertikální frézovací hlava výkyvná

Stav: použitý, Rok výroby: 2007, Brúsna plocha 600 x 450 mm Veľkosť magnetickej platne 600 x 400 mm Iiodpfxevy Ip Io Ac Hjk Rozmery brúsneho kotúča 300 x 50 x 76,2 mm Celkový požadovaný príkon 11 kW Hmotnosť stroja cca 2,1 t Stroj je podľa nášho posúdenia vo veľmi dobrom použitom stave a je možné si ho po dohovore pozrieť pod napätím. Príslušenstvo, zobrazené náradie a upínacie zariadenia patria k dodávke len v prípade, že sú uvedené v doplňujúcich informáciách. Zmeny a omyly v technických údajoch a informáciách, ako aj predaj s výhradou medzičasného predaja!

Stav: dobrý (použitý), Rok výroby: 1985, číslo stroja/vozidla: 1076-85, Ponuka číslo 24303 Technické údaje: - Veľkosť stola cca 630 x 340 mm Iodpot Dxwgjfx Ac Hjik - Pracovný rozsah osí: - X (pozdĺžna) cca 400 mm - Y (priečna) cca 220 mm - Z (zvislá) cca 400 mm - Maximálna vzdialenosť medzi frézovacím vretenom a plochou stola 400 mm - Upínanie nástrojov SK 40 - Otáčky pracovného vretena regulovateľné v 16 stupňoch 45 - 2240 min⁻¹ - Pracovné posuvy stola X; Y; Z 6,3 - 1250 mm/min - Pohon 400 V / 8,5 kW - Potrebný priestor cca Š 1450 x V 1900 x H 1450 mm - Hmotnosť cca 1 600 kg Výbava: - 3-osý digitálny odpočet HEIDENHAIN - Vertikálna frézovacia hlava otočná - Protiľahlý držiak pre horizontálne vreteno - Strojový zverák

Stav: použitý, Rok výroby: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Type JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement max. 230 mm): 200 mm Max. grinding height under wheel approx.: 230 mm Table to spindle center distance max.: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Creep feed speed (grinding): 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Grinding head vertical speed max.: 500 mm/min Grinding wheel dimensions: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speeds, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Equipment • Microprocessor program control (SIEMENS) with simple screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: Plunge grinding with/without cross positioning, surface grinding with stepped crossfeed or continuous crossfeed, creep feed grinding in up- or down-cut mode with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic return. • Automatic straight dressing device AF 65 S with automatic compensation of dressing value and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – profile dresser for grinding wheels mounted above the wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Separate swivelling, fine-pole sine magnetic chuck 350 x 175 mm with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG service engineer! Please click here for a video of the machine: Isdpfx Acswd Tx Uo Hoik Delivery: Ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice

Stav: použitý, TECHNICKÉ ÚDAJE Iiedpfsuhb Uhex Ac Hok - max. výkon: 40 [t] - max. priemer obrobku: 40 [mm] - priemer vretena: 80 [mm] - dĺžka vretena: 120 [mm] - max. priemer nástroja: 250 [mm] - rozmery (DxŠxV): 2400 x 2100 x 2200 [mm] - hmotnosť: 7100 [kg] PRÍSLUŠENSTVO - CNC riadenie (základ Siemens) - protiprístroj (koník) - nádrž na chladiacu kvapalinu s čerpadlom - 2 vyvrtávacie kolieska 80, priemer: 260 [mm]