Recirkulačný a filtračný systém tryskacích skríň

MM 2010 Druckstrahlkabine Integrierter Patronenfilter

Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and, thanks to the innovative abrasive recirculation system, is suitable for all types of blasting media.

Thanks to the bucket elevator, which is firmly connected to the blasting cabinet, even the heaviest types of abrasives—such as stainless steel shot, cast steel, and other metallic abrasives—can be used without issue. Compared to competitor systems, here the blasting media is not sucked back but rather conveyed via a flat conveyor system to the adjacent bucket elevator. The bucket elevator transports the material upwards and discharges it into the cyclone separator, where the abrasive is cleaned and then returned to the blasting process. Our specially developed abrasive recirculation and recycling system ensures continuous media supply at all times, regardless of the suction power of the extraction system.
Dsdpfjwc Nrnjx Afmeul

By utilizing the abrasive recirculation system and innovative fan technology, the blasting cabinet has a very low energy requirement (0.75 kW fan motor). Since the blasting media is not sucked back, no oversized extraction unit with high power consumption is necessary (as with many competitor systems).

To achieve maximum blasting performance, the "MM 2010" pressure blast cabinet is equipped with a pressure pot with a 60-liter capacity. It includes a pressure regulator to allow stepless adjustment of blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is also permanently installed on the blast pot, protecting the abrasive from moisture.

The pressure blast nozzle is made of highly wear-resistant boron carbide and enables service lives of up to 1,000 hours, depending on the abrasive used.

The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the cabinet itself from wear. An air blow-off gun is installed for cleaning blasted workpieces and blowing off the cabin walls.

The permanently mounted cartridge filter extraction unit ensures optimal visibility inside the blasting chamber and maximum abrasive lifespan. The dust extraction system features continuous cleaning of the filter cartridges using compressed air pulses. This guarantees long service life for the filter media and consistently stable extraction performance.

Loading the blast chamber is done via an angled front flap, which swings fully upwards. This allows for loading the sandblasting cabinet by forklift or crane. The robust work grate is loadable up to a maximum of 500 kg.

To ensure optimal visibility in the chamber, two powerful and energy-efficient LED lights are mounted on the cabin roof. Their roof-mounted location ensures they are protected from dust and wear.

The system is operated via a modern touch display. To ensure safe operation, the blasting cabinet is equipped with a door safety switch. The installed viewing panes are made of toughened safety glass (ESG) and feature a protective film against wear.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.