Dvojstĺpový ťažný lis - hydraulický

MÜLLER ZE 500 - 12/12.2.1 (UVV)

Stav: použitý, Rok výroby: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Maximum ram stroke: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor level: 810 mm Ledou Nfvuopfx Ah Dsrl Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. machine dimensions (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter as is.

Stav: nový, Rok výroby: 2024, Hackerova čepeľ 40 x 40 konkávna Čepeľ pre stroje Weima, Gross ... Pre takmer všetky bežné štiepkovače / drviče Lrjdobxu Dhspfx Ah Dol Skladom v Bitburgu Predbežný predaj vyhradený

Rok výroby: 1993, stav: použitý, TYP: DEA 400/2000 Typ ROK: n.d. Rok výroby MAXIMÁLNY LISOVACÍ TLAK: 400 t Lisovací kapacita ZDVIH BERANA: 1 100 mm Zdvih sane MAXIMÁLNA SVETLOSŤ: 1 600 mm Maximálna výška medzi beranom a stolom ROZMERY STOLA: 2 000 x 1 600 mm Rozmery stola RÝCHLOSTI RÝCHLOBEHU: 650 mm/s Ljdpfx Aeihf R Ujh Dsrl Rýchloposun KAPACITA VYSTREKOVACEJ PODLOŽKY: 160 t Kapacita vyhadzovacieho vankúša ZDVIH VYSTREKOVACEJ PODLOŽKY: 400 mm Zdvih vyhadzovacieho vankúša VÝŠKA NAD PODLAHOU: 5 800 mm Výška stroja nad podlahou PREDNÁ SVETLOSŤ: 3 400 mm Svetlosť medzi stojanmi BOČNÁ SVETLOSŤ: 1 600 mm Bočné okno

Stav: nový, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 (standard) Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Lsdpfx Ahsg Ezarj Dsrl Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Integrated 2-circuit pump system (INFO: Ensures rated performance even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metals free: optional) - All media-carrying components and pipelines insulated for low temperature applications - Water-cooled condenser (air-cooled available on request) *OPTIONS: - Flow control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test sample draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This equipment complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in the quotation and/or order confirmation.

Stav: použitý, Rok výroby: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between side frames: 1000 mm Shut height: 615 mm Table surface: 1400 x 880 mm Table through-hole: 450/500 mm Table height above floor: 800 mm Ram surface: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Lrjdpfxovut Ncj Ah Dsl Space requirements approx. 2.0 x 2.6 x 4.1 m Approved for manual feed operations in accordance with German accident prevention regulations (UVV) Equipped with pole-changeable motor, pneumatically actuated clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, centralized motor-driven lubrication, two-hand operation system. The machine can be inspected under power at our warehouse.

Rok výroby: 1980, stav: dobrý (použitý), A very well-maintained, cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of the gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose (DIN 55022): Size 8 Ljdpfx Aogyy I Ajh Dorl Number of spindle speeds: 18, Range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: - Tailstock - Pneumatic three-jaw chuck with changeable jaws, 315 mm - "MULTIFIX" quick-change tool post, size "C", in front of the centre - Four-way turret behind the centre - Tool holder - Coolant system - Pneumatic follow rest Technical data and dimensions: Subject to change. Video conference via WhatsApp possible by appointment.

Rok výroby: 2008, stav: veľmi dobrý (použitý), SMG HZPU 8000-3000/2100-S1 Hydraulický ťahový lis Značka: SMG Typ: HZPU 8000-3000/2100-S1 Rok výroby: 1995 Popis: Hydraulický ťahový lis typu H rám, hydraulický lis Lisovacia sila: 800 ton Lrsdpsn Awd Rsfx Ah Dol Upínacia plocha: cca 3 000 x 2 100 mm Montážna výška: max. 1 400 mm

Stav: použitý, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture: 1986 - Retrofit: 2000 Pressing force: 200 tons Clearance between uprights (front): 2050 mm Side opening (upright passage): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Max. installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Lrjdpfedzp Tcsx Ah Djl Control pump motor power: 11 kW Power supply: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at top dead center - Travel measuring system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Required floor space (upright position) L x W x H: 3700 x 2900 x 5900 mm Overall height incl. motor: 5900 mm Required space for horizontal transport L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 it was used as a tool try-out press in a toolmaking facility. Good condition.

Stav: dobrý (použitý), Rok výroby: 1998, Pressing force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight Table - Ram (stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Lodov Rwu Uopfx Ah Dorl Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE norm With oil-hydraulic drive, control dependent on pressure/time and stroke length, front light barrier (Sick), Two-hand operation

Stav: nový, Rok výroby: 2025, dĺžka pílového pásu: 4 420 mm, šírka pásovej píly: 34 mm, Dvojstĺpová pásová píla, plne automatická Everising H-360 HB Rezné rozpätie kruh: 0 – 360 mm Rezné rozpätie štvorec: 360 x 360 mm Upínanie zväzkov: šírka: 180 – 280 mm Upínanie zväzkov: výška: 50 – 160 mm Výkon pohonu: 3,7 kW Rozmery pílového pásu: 4420 x 34 x 1,1 mm Hmotnosť: 2310 kg Rozmery stroja: 2500 x 2200 mm Štandardná výbava stroja zahŕňa: • Robustná oceľová konštrukcia v dvojstĺpovom prevedení • NC posuvný systém • Frekvenčne riadená rezacia rýchlosť (plynule nastaviteľná, riadená meničom) • Digitálny ukazovateľ rezacej rýchlosti • Hydraulicky ovládané dvojité horizontálne upínače • Hydraulické napínanie pílového pásu • Vedenia pásu (vrátane zadného vedenia pásu) z karbidu • Hydraulicky predopnuté vedenia pásu • Presné PLC riadenie (SPS) pre všetky hydraulické a elektrické komponenty • Počítadlo rezov s automatickým vypnutím • Automatické vypnutie pri nedostatku materiálu • Multijob funkcia • Zariadenie na upínanie zväzkov • Poháňaná kefka na triesky • Automatická kontrola prasknutia pásu vrátane núdzového vypnutia Lsdpfx Ajq St U Njh Derl • Pištoľ na čistenie triesok • Flexibilné pracovné svetlo • 2 metre valčekovej dráhy • Skriňa na náradie • Funkcia tvrdokovu Špeciálne vybavenie zahŕňa: • Variabilné zníženie upínacieho tlaku • Kontrola vedenia rezu Obsiahla kompletná nemecká dokumentácia.