Bezhrotová brúska na valcové kotúče

Nomoco M40

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, Löser centerless tube grinding machine – belt grinding machine – centerless tube polishing machine – cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and underwent a complete overhaul in 2012. During the overhaul, it was converted for polishing operations and has since polished approximately 10,000 parts. Afterward, the machine was no longer used. As part of the overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing tasks. A wastewater treatment system including pumps is not currently installed. We can retrofit this upon customer request. The transport systems (roller conveyors) between the grinding stations also need to be adapted to suit your workpieces and can be retrofitted as well. Cgsdpfjpugwijx Alyet The machine can process tube diameters from 10 mm up to 160 mm. The grinding/polishing motors deliver 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Stav: použitý, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swivel range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Min. indexing increment: 2.5 [degrees] - Internal grinding: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLE - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Min. C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill stroke: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 20 [kVA] WEIGHT AND DIMENSIONS - Required space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] EQUIPMENT - Control: FANUC Oi-TD - Electronic handwheel - 3-color status lamp - Oil mist extraction unit - Direct position feedback system axes: X / Z - Dynamic balancing for grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Fixed dressing device Cgodpfxsylc R Uj Alyst - Workpiece probe system - Coolant tank: 375 [l] * with paper filter

Stav: dobrý (použitý), Rok výroby: 1994, Funkcionalita: plne funkčný, dĺžka posuvu os X: 1 050 mm, dĺžka posuvu osi Y: 360 mm, dĺžka posuvu osi Z: 500 mm, pojazdová vzdialenosť osi X: 1 050 mm, zdvih osi Y: 360 mm, zdvih osi Z: 500 mm, celková hmotnosť: 3 000 kg, Výbava: dokumentácia / manuál, Tiger FO 135 univerzálna frézka Popis Stroj bol zakúpený ako nový v roku 1994 a má za sebou len veľmi málo prevádzkových hodín. Frézka je plne funkčná. Pohyby osí sú plynulé a vedenia sú vo veľmi dobrom stave. Disponujú automatickým mazacím systémom. Stôl je v dobrom stave a vykazuje minimálne známky opotrebovania. Stroj je vybavený digitálnym odmeriavacím zariadením (DRO) pre všetky tri osi, čo umožňuje prácu s kompenzáciou frézy a opakovanými meracími operáciami. Ku stroju aj digitálnemu odmeriavaniu je priložený návod na obsluhu. Technické špecifikácie • Rozmery stola: 1 400 x 340 mm, 4 T-drážky • Automatické pojazdy: ➢ Pozdĺžny smer X: 1 050 mm ➢ Priečny smer Y: 360 mm ➢ Vertikálny smer Z: 500 mm • Uchytenie vretienového kužeľa: ➢ Vertikálna os ISO 40, automatické aretovanie ➢ Horizontálna os ISO 40, manuálne aretovanie • Rozsah otáčok vretena: ➢ Vertikálna os: 33 ÷ 1 560 ot./min, 12 rýchlostí ➢ Horizontálna os: 35 ÷ 1 550 ot./min, 12 rýchlostí • Inštalované výkony: ➢ Vertikálne vreteno: 5 kW ➢ Horizontálne vreteno: 7,5 kW ➢ DC motor: 15 Nm • Plynulá regulácia rýchlosti posuvu 0 ÷ 1 500 mm/min • Rýchloposuv: ➢ Pozdĺžny a priečny smer: 3 000 mm/min ➢ Vertikálny smer: 1 500 mm/min • Univerzálna hlava s manuálnym spustením vretena o 80 mm • Automatické mazanie s čerpadlom • Elektrické ovládanie nízkeho napätia na tlačidlovom paneli bočného ramena • Spúšťanie hviezda-trojuholník • Magnetická tepelná ochrana Siemens • Čistá hmotnosť 3 000 kg • Rozmery stroja (pre transport): Cgsdpfxorqwbio Alyot ➢ Šírka 2 300 mm ➢ Hĺbka 2 900 mm ➢ Výška 2 400 mm Príslušenstvo • Protisúporty pre rezný hriadeľ • Rezný hriadeľ ø32 mm

Stav: použitý, Výrobca: CINCINNATI Codpfswrpykjx Alyjgt

Stav: použitý, Rok výroby: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m D I S K U S Vertical double-sided surface grinding machine in C-frame design and with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 Serial no.: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x grinding width approx.: 60 x 120 mm Vertical adjustment of quills, each approx.: 150 mm Hydraulic infeed pulses for depth feed: 0.0025 – 0.05 mm Outer diameter of the transport disc approx.: 810 mm Rotary table feed, continuously variable: 14 – 145 mm/s Grinding wheel speed each approx.: (24 m/s) / 765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Total weight approx.: 7,000 kg Accessories / Special Equipment • Workpiece rotary device for round workpiece transport discs with corresponding slots for loading parts and with automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring the ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Continuous speed control of the rotary device according to grinding dimension and workpiece. • Manual grinding wheel infeed via corresponding buttons • Hydraulically swiveling dressing unit (RA) between the two grinding wheels for simultaneous dressing of both grinding wheels with corresponding compensation and automatic repositioning to the effective workpiece thickness after dressing = high time savings, can be manually triggered as well as via a timer. • Ampere meters for both grinding spindle drives * Central lubrication Cgedpfx Aot Hw N Hjlyjt • Mechanical height control of the workpieces with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series. For example: washers, piston rings, hydraulic parts, clock parts, stamped parts, etc. Condition: good – will be ready for demonstration soon Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stav: pripravené na použitie (použité), Rok výroby: 2008, Výrobca: MAZAK Typ: INTEGREX 300-4ST Rok výroby: 2008 Ovládanie: Mazatrol Matrix Hmotnosť stroja cca: 13 900 kg Upínanie nástrojov: Capto C6 X-dráha: 530 mm Y-dráha: 200 mm Z-dráha: 1 065 mm Rozsah otáčok: 4 000 ot./min. Priemer sústruženia: 300 mm Dĺžka sústruženia: 1 000 mm Priestorová náročnosť cca: 6 500 × 3 000 × 3 200 mm Cjdpoyh I Tdofx Alyegt Revolver na nástroje - pozície: 80 poz.

Stav: takmer ako nový (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, MORI SEIKI SL-600B/2000 CNC SÚSTRUH Kategória: CNC sústružnícke centrá Cgjdpfx Aox Nv Shelyjt Referenčné č.: 400212 Kapacita: Ø900 x 2000 mm Rok výroby: 1999 Technická špecifikácia: CNC Riadenie: Fanuc 18iT PRACOVNÉ PARAMETRE Maximálny priemer sústruženia: 900 mm Maximálna dĺžka sústruženia: 2000 mm Obežný priemer nad lôžkom: 994 mm Vzdialenosť medzi hrotmi: 2300 mm Obežný priemer nad suportom: 733 mm Posuvy (X): 485 mm (440 + 45) mm Posuvy (Z): 2150 mm REVOLVEROVÁ HLAVA Revolverová hlava: 12 pozícií Prierez upnutého noža: 32 mm Priemer upnutia vyvrtávacej tyče: 65 mm KONÍK Koník: MT5 Vysunutie pinoly koníka: 150 mm Priemer pinoly koníka: 150 mm VRETENO Maximálne otáčky: 1500 ot./min. Upínacia plocha hlavného vretena: JIS A2-15 Priemer otvoru hlavného vretena: 185 mm Typ vretena: 3-stupňová prevodovka Vnútorný priemer ložiska vretena: 260 mm ROZMERY STROJA Hmotnosť: 16 t Doplňujúce informácie: Všetky parametre boli čerpané z verejne dostupných zdrojov, ich správnosť je potrebné si overiť kupujúcim.

Stav: dobrý (použitý), Rok výroby: 2000, prevádzkové hodiny: 53 776 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 500 mm, zdvih osi Y: 400 mm, zdvih osi Z: 380 mm, priemer otočného stola: 500 mm, otáčky (max.): 18 000 ot./min, For sale is a Deckel Maho DMU 50 eVolution 5-axis simultaneous milling machine. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control system: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 380 mm B-axis: 0-180° C-axis: 360° Clamping area: Ø 500 mm Max. table load: 200 kg Cgsdpfowxd Agox Alyjt Spindle taper: SK40 Max. spindle speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg On request, loading and transport can be organized throughout Europe for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or contact options, please visit our website.

Stav: dobrý (použitý), Rok výroby: 1998, Diely ukazované rukou nie sú súčasťou dodávky. Technické údaje sú zobrazené na obrázku. Cgedjwb Aqnepfx Alyst

Rok výroby: 1992, stav: použitý, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg Cgjdpfot Hw Naox Alyst D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Spindle vertical adjustment (each): approx. 150 mm CNC-controlled grinding wheel infeed: 0.0001 mm Workpiece transport device feed rate, stepless: 40 - 235 mm/sec Grinding wheel speed (each, 30 m/s): 191-955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total power: approx. 85 kW/380 V/50 Hz Weight: approx. 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (upper and lower infeed, dressing unit, and workpiece rotation), direct input of all grinding parameters, plus • IONIC measuring control No. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers appropriate infeed of the grinding wheels, continuous measurement results on monitor for statistics, workpiece counting, etc. • Digital display of power consumption (amperes) for drive motors and grinding wheel speed • Portal design for greater stability and increased grinding accuracy • Rotary workpiece transport with stepless rotational speed adjustment as the 4th axis • Position monitoring unit to supervise the vertical position of the lower grinding wheel • 2 adjustable workpiece hold-downs at infeed and outfeed, each with height monitoring, simple stacker for raw parts, and outfeed of finished parts via conveyor belt • Semi-inclined, laterally mounted grinding wheel dressing device with pre-programmable dressing cycle, integrated as a CNC axis in the control, with safety shut-off • Large separate electrical cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, several table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large-scale production, such as stamped parts, piston rings, hydraulic components, etc. Condition: Good to very good – ready for demonstration soon Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. If you require a different grinding machine – especially from DISKUS – please contact us with your inquiry.