Fréza

OPTIMUM OPTImill MT 60

Stav: ako nová (výstavný stroj), Rok výroby: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, residual dust content less than 0.1 mg/m³. High extraction capacity with minimal space requirements. Maximum performance in this class. Very quiet operation. Application Area Clean air extraction systems for wood chips and wood dust Designed for commercial operation Suitable for all woodworking machines with corresponding extraction nozzle diameter Can be used for multiple dust sources High-quality, well-thought-out construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be easily switched from left to right, for flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for immediate use Mobile Description of the Filter Ultra-compact with maximum filter surface Filter material made of polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic design, certified and approved to M-BIA category Filter resistance monitoring via differential pressure switch, adjustable, with warning light on control box The fan is installed downstream of the filter Features: Hjdpfx Aocnw U Djgtsfb With newly developed locking device for secure positioning of the container All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of Delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-configured for connection of machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure attenuator available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow: 1095 m³/h Max. air flow: Vacuum at nominal flow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of suction nozzle to floor: 850 mm Weight: 194 kg Location: Coming into stock at 54634 Bitburg

Stav: nový, Pásová píla Značka: METALLKRAFT Model: BMBS 230 x 280 H-DG Katalógové číslo: 3680013 Stav: Nový stroj Rezací rozsah (okrúhly): 230 mm Rezacia rýchlosť: 35/70 m/min Štandardné vybavenie: - Horizontálny upínací zverák - Doraz dĺžky (600 mm) - Monitorovanie napnutia pásu, elektromechanické Hjdpfxecuntzs Agtefb - Kefa na odstraňovanie triesok - Chladiace zariadenie - Návod na obsluhu

Stav: použitý, najazdené kilometre: 11 250 km, výkon: 85 kW (115,57 k), prvá registrácia: 10/2022, typ paliva: nafta, ďalšia kontrola (TÜV): 10/2022, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 6, počet sedadiel: 5, Výbava: ABS, centrálne zamykanie, imobilizačný systém, klimatizácia, navigačný systém, sadzový filter, záruka na ojazdené vozidlá, Special equipment: Vehicle without model designation, metallic paint, metallic paint Sunset Orange Additional equipment: Hfodpfx Aev A Nhqsgtsb Passenger airbag deactivatable, driver and passenger airbags, Trailer Stability Program (ASL), "Connected" equipment package, ConnectedDrive Services equipment package, electrically adjustable and heated exterior mirrors, BMW Live Cockpit, BMW Live Cockpit Professional, onboard computer, DAB tuner (digital radio reception), Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), electronic locking differential, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver assistance system: driving experience selector, driver assistance system: performance control, electric windows front and rear, Bluetooth hands-free system with USB/audio interface, velour floor mats, 7-speed dual-clutch transmission with Steptronic, urea tank (SCR): 20.5 liters, interior trim: Quartz silver matte grain, ISOFIX child seat mounts on rear seat, body: 5-door, head airbag system rear, head airbag system front, steering column (steering wheel) mechanically adjustable, headlight range control, engine 1.5 l - 85 kW 12V turbodiesel, electric parking brake, personalization system (personal profile), tire pressure monitoring system, split/folding rear seat backrest, low-emission according to Euro 6d standard, heated windscreen washer nozzles, front side airbags, service system: ConnectedDrive Services, service system: intelligent emergency call incl. TeleServices, seat cover/upholstery: Grid fabric, start-stop button, start/stop system (function), warning triangle, heat-insulating tinted glass.

Stav: použitý, Rok výroby: 2016, Technické detaily: Hsdpfx Agovav Sdetefb Maximálny priemer sústruženia nad lôžkom: 402 mm Maximálny priemer sústruženia nad suportom: 245 mm Sústružnícka dĺžka: 1000 mm Vzdialenosť medzi hrotmi: 1000 mm Výška hrotu: 200 mm Obežný priemer v výreze: 560 mm Šírka výrezu: 120 mm Otáčky vretena: 40 - 345 / 345 - 1015 / 1015 - 2800 ot./min Posuv: pozdĺžny: 0,05 - 0,752 mm/ot + priečny: 0,025 - 0,376 mm/ot Priemer vretena: Ø 42 mm Upínanie pinoly koníka ISO: MK4 Zdvih pinoly koníka: 180 mm Celkový príkon: 4,1 kW Hmotnosť stroja cca: 1,2 t Rozmery stroja (DxŠxV): cca 2,4 x 1,0 x 1,7 m Sústruh nemá rýchloposuv. Polohovanie v 2 osiach Zobrazovanie pomocou Pinacho Lathe Controller Rýchloupínací systém Multifix s nožom na sústruženie Chladiace zariadenie Nožný pedál Možnosť rezania závitov (metrický, Whitworth, modulový, inchový závit)

Stav: dobrý (použitý), Otočná vřetenová frézka, stolní frézka, stolní frézovací stroj -Nastavení vřetena: výška a úhel -naklápění: -3° až 45° -Pohon: 4,5/5,5 kW -Otáčky: 3000/4500/6000/9000/12000 ot/min Hfsdpfoh Nvyzjx Agtjb -Podsávací zařízení Holz-Her s 3 válci -Užitná délka hřídele: 100 mm -Vřeteno: Ø 30 mm -max. fréza: Ø 220 mm -Rozměry: 1540/1100/V1520 mm -Hmotnost: 962 kg

Stav: nový, Optimum OPTImill MZ 2S Milling Machine Equipped with a digital 3-axis position display DP 700 by NEWALL. The feed axes are inverter-driven and controlled via the operator panel. Versatile Applications Excellent vibration damping and stability of the machine frame All guides are hardened, precision-ground, and adjustable via gib strips Automatic feed on X, Y, and Z axes, continuously adjustable via the electronic joystick on the control panel Electronic feed limit stop Ball screw drives on all axes Centrally and clearly arranged control panel with integrated digital position and speed display Massive, large-format cross table with precision-machined surface and 5 T-slots Coolant system Large dimensioned handwheels with scales Machine lamp Smooth running Manual central lubrication system TECHNICAL DATA Dimensions and Weight Length (approx.): 1239 mm Width/Depth (approx.): 1168 mm Height (approx.): 1900 mm Weight (net, approx.): 1400 kg Drilling/Milling Head Head swivel range: ±90° Drill-Milling Capacity Max. cutter head size: 100 mm Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 26 mm Max. shank milling cutter size: 25 mm Electrical Data Drive motor power: 2.2 kW Connection voltage: 400V Mains frequency: 50 Hz Horizontal Milling Table Table length: 750 mm Table width: 320 mm Vertical spindle to horizontal table min.: 75 mm Vertical spindle to horizontal table max.: 410 mm Horizontal table T-slot size: 14 mm Number of T-slots: 5 T-slot spacing: 63 mm Horizontal spindle to horizontal table min.: 70 mm Horizontal spindle to horizontal table max.: 400 mm Max. load capacity on horizontal table: 285 kg Vertical Milling Table Table length: 830 mm Table width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Coolant System Coolant pump power: 95 W Travel Manual travel X-axis: 400 mm Manual travel Y-axis: 200 mm Manual travel Z-axis: 335 mm Automatic travel X-axis: approx. 310 mm Hodpsfnh Sgofx Agtefb Automatic travel Y-axis: approx. 160 mm Automatic travel Z-axis: 295 mm Vertical Spindle Vertical spindle overhang: 100 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 50 – 1,890 rpm Number of speed ranges: 12 steps Drawbar: M16 Quill stroke: 120 mm Max. vertical spindle torque: 1,100 Nm Feed Speed Feed speed X-axis: 10 – 600 mm/min Feed speed Y-axis: 10 – 600 mm/min Feed speed Z-axis: 10 – 600 mm/min Electrical Connection Total connected load: 4 kW Motors Rapid traverse X-axis drive motor: 0.375 kW Rapid traverse Y-axis drive motor: 0.375 kW Rapid traverse Z-axis drive motor: 0.375 kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 Arbors MK1 and MK2 Horizontal milling spindle Ø 27 mm Operating tools

Stav: použitý, Rok výroby: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9-6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19 - 890 (x) mm/min Spindle taper: SK 40 Column overhang: 200 - 680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive via a frequency inverter "made in Germany" and digital 3-axis position display DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity achievable by tapered roller bearings, less than 0.01 mm runout measured at the quill. Automatic quill feed. Forward/reverse for thread cutting. X and Y axes with adjustable dovetail guides. Coolant system. Y-axis with flat guideways. Large Y-axis travel of 400 mm. Motorised table elevation with rapid traverse (Z-axis). Features: - Frequency inverter quality Made in EU - Drilling-milling head, tiltable ± 45°, overhang 200 - 680 mm - Spindle speeds infinitely variable, exceptionally wide speed range - Adjustable drilling depth stop with millimetre scale, readable from the front - Adjustable, large protective screen - Cross table: robust, large dimensions, precisely surface-ground - Motorised Z-axis table height adjustment - Adjustable end stops - OPTI control panel: Integrated control panel; integrated digital position display DPA 21 including spindle speed display - X-axis: Motorised table feed, infinitely variable feed adjustment, rapid traverse, forward/reverse Technical Data: - Length (Product): 1,500 mm - Width/Depth (Product): 1,450 mm - Height (Product): 2,200 mm - Net weight: 1,150 kg - Total connected load: 4 kW - Electrical voltage: 400 V - Phases: 3-phase AC - Mains frequency: 50 Hz - Max. face mill diameter: 100 mm - Max. end mill diameter: 20 mm - Vertical spindle overhang: 200 - 680 mm - Vertical spindle mounting: ISO 40 DIN 2080 - Vertical spindle speed range: 8 steps, electronically adjustable - Horizontal milling table length: 1,370 mm - Horizontal milling table width: 254 mm - Distance vertical spindle – horizontal table min.: 40 mm - Distance vertical spindle – horizontal table max.: 446 mm - Horizontal table T-slot size: 16 mm - Horizontal table T-slots: 3 - Horizontal table T-slot spacing: 63 mm - Horizontal table max. load capacity: 275 kg - Vertical spindle drive motor: 3 kW - Coolant pump motor: 100 W - Manual X-axis travel: 930 mm - Manual Y-axis travel: 400 mm - Manual Z-axis travel: 406 mm - Automatic X-axis travel: 850 mm - Automatic Z-axis travel: 350 mm - Drilling capacity steel (S235JR): 32 mm Hjdpfx Ajt U Rm Isgtsfb - Continuous drilling capacity steel (S235JR): 28 mm - Milling head rotation range (Z to X plane): +/- 45 degrees - Quill stroke: 127 mm - Quill feed: 0.04/0.08/0.15 mm/rev

Stav: nový, Univerzálna frézka Značka: OPTimill Model: MT 50 Katalógové číslo: 3336005 Stav: Nový stroj Pojazdy: - Os X 580 mm - Os Y 200 mm - Os Z 340 mm Štandardne vybavená: - 3-osý digitálny odpočet DPA 31 PLUS - Automatický posuv v osi X - Dlhý frézovací trn 16 mm - Dlhý frézovací trn 22 mm - Upínanie skľučovadla B 18 - Ozubené vrtacie skľučovadlo 3-16 mm/B 18 - Redukčná puzdro MK 2 s vyražacou štrbinou - Redukčná puzdro MK 3 s vyražacou štrbinou - Strojové svetlo - Zariadenie na chladenie - Ovládacie náradie - Návod na obsluhu Hfedpfxebnfxuj Agtsb

Stav: nový, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal table travel ----- 560 mm Cross table travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Phase INCLUDES * Drill chuck with arbor ISO30 - B16 * Left / Right switch Hedpjga T Anefx Agtofb * Spindle guard * Fine adjustment * 2-speed motor * Drift wedge * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * Milling chuck ISO30 + 12 collets in case * Milling cutter set

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Universal tool milling machine with gear transmission, Hfodpfofvci Eox Agteb Travel paths X/Y/Z: 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, motor 3 kW, 18 spindle speeds from 40 to 2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left-right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/swivel table, dimensions 1500x1700x1750 mm, approx. 2200 kg