Zvárací súprava

OTC CPTX-i 400 2w

Stav: ako nová (výstavný stroj), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard equipped with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if water cooling fails or overheats to protect the torch package. These functions are an approx. €400 surcharge at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, long – Each unit is supplied with a 5-meter connection hose package between the power source and wire feed case for more flexibility and better handling. Take the wire feed case off the unit for use in hard-to-reach areas! The hose package is neatly mounted on a hook at the side of the unit. (Hooks are produced by us) ➤ Fronius Large Carriage – Probably the best carriage on the market with a gas cylinder holder. ➤ Binzel Torch Package – With Up/Down control for amperage adjustment on the torch. ➤ Ground Cable 3–4m ➤ New pressure regulator from Messer ➤ New basket reel adapter for large wire reels With this machine, nearly all materials can be welded, including aluminium, steel, and V2A (stainless steel). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in sheet metal fabricating. Additional options available for a surcharge, e.g., Fronius AW4000/AW5000 Job Master torch package (display on torch) + €550.00 ----- Hsdpfx Afjwbil Ssfenk IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also reachable via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What condition are the units in? For your information: we purchase barely-used second-hand units, disassemble and thoroughly check them, replace any wear parts as needed, and only after successful test welding are they released for sale. "All" units are clean, with no burn marks on the displays and no numerous torch or dent marks on the units! When you buy from us, you get an item that is also ⭐worth seeing and not completely worn out! ►►► Do we get an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and fulfill the requirements for intra-community delivery within the EU, we can provide a net invoice. ►►► What payment methods are available? Prepayment or cash on personal collection ►►► Why buy from us? We are professionals for this series of Fronius welding equipment and always have 60–80 devices in stock – exclusively Fronius! We do not sell any other brands. We know these machines inside out and only sell what we have full expertise in.

Stav: použitý, Rok výroby: 2009, celková dĺžka: 5 500 mm, celková šírka: 2 300 mm, celková výška: 2 900 mm, Weight: 18,700 kg Price: On request - Year of manufacture: 2009 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 83261 - Control: CNC - Control system brand: HACO - Control system type: BC59T Graphics - Number of axes [pcs.]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 4300 - Frame gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Crowning system: CNC-controlled - Punch holder: Quick-release - Options: Finger guard - Transport dimensions: 5500mm x 2300mm x 2900mm (L x W x H) - Transport weight [kg]: 18,700kg - Number of transport packages [pcs.]: 1 Financial Information Hnsdpfxsxrl Hds Affjk VAT: The indicated price is net of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Stav: nový, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage with 400 mm vertical stroke for height adjustment * Thermal separation of drive and cutting areas ensures highest precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Plug & Play set-up or relocation of the machine possible using forklift, pallet jack or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system is characterized by a stable table design for max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxy-fuel flame cutting technology is required. The workpiece support frame is equipped with replaceable flat bar slats, mounted at a 45° angle and 3 mm thick. The distance between the slats is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, notching, and center punching of coated metallic materials possible * Inverter power source with digitally controlled, fully electronic process sequence * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: Integrated CAD/CAM module within the machine control TEKA EcoCube Extraction 5.5 kW Medium to be filtered: dry, grease-free, or oil-free dust / fumes Filter area: 100 m² (4 cartridges of 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor output: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Current type: 3Ph+N+PE Fan assembly: on the unit, with silencer duct elbow, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Suction port: NW 250 mm via suction duct, left side Exhaust: via silencer duct elbow Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each mounted with a bulkhead fitting - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolts - Cables in UL version Hnsdpepm U U Njfx Affjk - EATON frequency inverter mounted to the left in the attached control cabinet

Stav: nový, Priemer pílového kotúča: 350 mm Hnsdpefg Rlcsfx Affjk Rozsah rezu pri 90 stupňoch – kruhový materiál: 115 mm Rozsah rezu pri 90 stupňoch – štvorcový materiál: 95 mm Rozsah rezu pri 90 stupňoch – obdĺžnik: 180 x 95 mm Pracovná výška: 925 mm Otáčky pílového kotúča: 15 – 90 ot/min Celkový príkon: 3,0 kW Hmotnosť stroja: cca 0,68 t Rozmery (DxŠxV): cca 0,8 x 1,0 x 1,85 m Elektropneumatický, vertikálny, lineárne vedený automatický pílový stroj určený na použitie HSS pílových kotúčov na sériové rezy od 60° vľavo do 45° vpravo v oceľových materiáloch. Stroj pracuje aj v poloautomatickom režime. CNC automat so spracovaním viacerých procesov a dvoma osami riadenými ovládaním MEP najnovšej generácie, čo umožňuje naprogramovať až 1000 rôznych rezacích programov s rôznou dĺžkou rezu a počtom kusov pri rovnakej hrúbke materiálu.

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 2000, pracovná šírka: 3 050 mm, uhol rezania (min.): 0,5 °, uhol rezu (max.): 3 °, max. hrúbka plechu: 6 mm, zadný doraz: 750 mm, vstupné napätie: 380 V, celková hmotnosť: 4 500 kg, Hydraulické nožnice na vertikálne strihanie Značka: HACO Model: TS 306 Výrobca/predajca: Casanova Trojfázové 380V Rok: 2000 Typ: Vertikálny strih (naklonenie noža) Dĺžka strihu: 3050mm Kapacita: 6mm Nastavenie uhla strihu: 0,5-3 stupne Počet prítlačiek: 13 Úderov za minútu: 8-14 Uhľové rameno: 1000mm Zadný doraz: 750mm Motorizovaný zadný doraz s manuálnym kolieskom na jemné nastavenie Hodpfx Afsxgdlnsfjnk Motor: 7,5 kW Hmotnosť: 4500 kg

Stav: veľmi dobrý (použitý), Rok výroby: 2012, Vertikálne obrábacie centrum umožňuje vykonávanie operácií vŕtania, frézovania, rezania a zaobľovania hrán v rozsahu technických možností uvedených v návode na obsluhu na dielcoch z plastu, PVC, ABS, metakrylátu, polykarbonátu, termoplastov, kompozitov a hliníka. Vertikálny pracovný stôl umožňuje jednoduché vkladanie a vyberanie obrábaných dielov a zároveň minimalizuje celkové rozmery zariadenia na nevyhnutné minimum. Výmena nástrojov s využitím 10-pozíciového zásobníka umiestneného na bočnej strane zariadenia umožňuje vykonávať rôznorodé práce bez potreby sňatia obrobku z pracovného stola. Maximálne rozmery obrábaného dielca: X = 4200 mm Y = 1600 mm Z = 20 mm Rýchloposuvy (m/min): Hnedpomzbr Sefx Affok X = 30 Y = 30 Z = 15 Frézovacie hlavy T1 a T2: Výkon vretena (kW): 3,3 Otáčky (ot/min): max. 18 000 Elektrické vreteno s upínaním – ER32 Vŕtacia hlava T3: Výkon motora vretena (W): 370 Otáčky (ot/min): max. 2 800

Stav: veľmi dobrý (použitý),

Stav: nový, Prúdový výkon 200 A Výkon pri 100% pracovnom cykle 150 A Sieťové napätie 230 V Hodpfx Aowrzrxsffjnk Hmotnosť stroja cca 9,0 kg Priestorové požiadavky cca 0,46 x 0,15 x 0,32 m TIG zvárací agregát - nový - zvárací horák so zváracím káblom 3 m - prídavný zvárací kábel 8 m - uzemňovací kábel - plynová hadica - dokumentácia

Stav: použitý, Rok výroby: 1970, číslo stroja/vozidla: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Hodpfx Ajfx Hv Heffsnk Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in clamping plate: 110 mm Ram mounting surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable construction via hydraulic adjustment system, tiltable in 4 steps, pass-through opening to the rear (325 x 500 mm) and downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, mode selector switch for setting continuous or single stroke, emergency stop switch, piece counter, various accessories.

Stav: použitý, Funkcionalita: plne funkčný, Multifunkčná zváračka (MIG, TIG, elektródy) Značka: Kemppi Model: Pro 3000 / Promig 500 Stroj s vodným chladením a chladičom Kemppi PRO Cool 10. Jednotka na TIG/elektródové zváranie Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcie pre TIG zváranie: predplyn, poplynovanie, oblúk, vysoká frekvencia Hnodpfx Aoxf Hv Hoffek TIG generátor Kemppi Pro 3000 Jednotka pre MIG/drôtové zváranie Kemppi PRO MIG 500 - Pracovný cyklus: 500A – 60% - Ovládací panel Kemppi ML SYNERGIC - 4 podávacie kladky - Pulzný oblúkový prúd s panelom Synergico - Špeciálne funkcie pre zváranie ocele, nehrdzavejúcej ocele a hliníka Zahŕňa: - TIG zváracia horák - MIG zváracia horák - Uzemnenie - Regulátor plynu