OTT Pacific V6-F

OTT Pacific V6-F

Stav: použitý, Rok výroby: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm; combi milling station radius R 2.5 mm. Technical description: - Hotmelt adhesive application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trim saw station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combi version) and fine adjustment of cutter from operator side - Free slots for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trim saw - Signal lamp for workpiece tracking - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate viewing windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: depending on equipment approx. 1,550 kg - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic incl. cooling and anti-static spray unit, year 2014: - 1 pc hot air module for producing the optical zero joint using special edge materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray unit - Including 2 extra quick-change edge channels - Including special version corner rounding milling unit - Max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edge banders - Retrofit also possible - surcharge on request - Technical data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation in approx. 2 min - Upgrade to 8 mm edge thickness, 1 pc, max. 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc 3-point pneumatic cutter adjustment - 1 pc switching radius – chamfer – flush for combi milling stations - Eliminates manual adjustment at the combi milling station for the third reference point - PLC control mandatory - Buffing station (polisher), 1 pc - Corner rounding unit, 1 pc, incl. combi tool and pneumatic chamfer/radius adjustment - Max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm Dcodpfxox S Hmzj Agtjh - Radius scraper, 1 pc, incl. pneumatic lift-off device, radius R 2.0 mm - Flat scraper, 1 pc, with pneumatic infeed control - Complete chassis, 1 pc - Gluepot quick-change system incl. glue discharge mechanism downward, preparation for 1 pc (without second gluepot) – including possibility for processing PU glue with the machine - Grooving saw unit, vertical into the panel, 1 pc, incl. pneumatic lift-off, vertical groove - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from workpiece edge: 14.0 mm - Special version grooving saw motor, increased power, 1 pc - Extraction for jointing unit internal, 1 pc, at dust collection unit of the machine - Ball bearing for corner rounding mill, 24.1 mm, 1 pc - Ball bearing for corner rounding mill, 24.2 mm, 1 pc - Protective agent spraying device, 1 pc, for edge surface for sensitive edge materials - Panel spray device, combined, 1 pc (separating and cleaning agent spray device) Storage location: Supplier

Stav: použitý, Formátová píla ALTENDORF F45 - použitá - Dvojitý posuvný vozík, predrezávacie zariadenie, paralelný doraz s jemným nastavením, vyložený stôl, hydraulické nastavenie výšky, hydraulické naklápanie, digitálny ukazovateľ uhla sklonu, ukazovateľ otáčok, predĺženie stola – eloxovaný hliník, rozšírenie stola – eloxovaný hliník, uhlovo-sklopný doraz, horný ochranný kryt úzky a široký, automatická brzda, testované na prach ----- Technické údaje ----- Rozsah naklopenia: 45 °, Dĺžka vozíka: 3 200 mm, Šírka rezu: 1 300 mm, Výška rezu: 125 mm, Max. priemer pílového kotúča: 400 mm, Rýchlosti: 3 000/4 000/5 000/6 000 ot./min., Dcodow Nx A Ijpfx Agtjh Výkon motora: 5,5 kW, Hmotnosť: 1040 kg

Stav: nový, Rok výroby: 2024, Dĺžka stola: 2000 mm Šírka stola: 1000 mm Výška zdvihu: 400 - 1010 mm Nosnosť: 300 kg Hmotnosť stroja: cca 220 kg Popis: Dcsdov Htkdjpfx Agtoh - Robustný nosný rám na pracovné dosky - Jednoduchá, chrbtici šetrná práca vďaka nastaveniu výšky cez nožný pedál - Optimálna manipulácia vďaka 4 otočným kolieskam, z toho 2 s brzdou - Doska z bukovej multiplex preglejky 2000 x 1000 x 30 mm - 5 rokov záruka

Stav: dobrý (použitý), Rok výroby: 1997, číslo stroja/vozidla: 21950, Offer 26030 Technical Specifications: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity (max.) in steel ST 60: 32 mm - Thread cutting device - Spindle taper: MT 3 - Spindle stroke: 180 mm - Spindle speeds continuously variable: - Range 1: 65 – 240 rpm | Range 2: 130 – 480 rpm - Range 3: 240 – 875 rpm | Range 4: 800 – 1750 rpm - 3 feeds: 0.1 / 0.2 / 0.3 mm/rev - Throat: 290 mm - Max. distance table – spindle: 520 mm - Swivel table with 2 T-slots: 450 x 450 mm - Height adjustable via rack and hand crank - Machine vice mounted below the swivel table - Emergency stop button - Lighting Dedpey D Nipsfx Agtjch - Drive: 400 V / 0.9 / 1.3 kW - Required space approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Stav: pripravené na použitie (použité), K dispozícii sú 2 kompresory. 1) CSC ab 300-670, rok výroby: 1997. 2) Atlas Copco GX5FF EP, rok výroby: 2019. Výkon motora: 5,5 kW, maximálny pracovný tlak: 10 barov, kapacita FAD: 13 l/s, 46,8 m³/h, 27,5 cfm, hladina hluku: 65 dB(A), štandardná veľkosť vzdušníka: 200 l. Rozmery (D/Š/V): cca 1430 mm / 665 mm / 1260 mm, hmotnosť: 210 kg. Dokumentácia k dispozícii. Dcjdstnf Iuepfx Agtoh

Stav: použitý, Rok výroby: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Type 1st unit: steel contact roller Sanding shoe 1st unit: electronic segmented pads 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Type 2nd unit: rubber-coated contact roller 65° Shore Sanding shoe 2nd unit: electronic segmented pads 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Dsdpfx Asytrf Rogtsch Abrasive belt speed 2nd unit: stepless 2 - 18 m/sec Belt blow-off device: for 2nd unit Cleaning brushes: yes Suitable for lacquer sanding: yes Vacuum conveyor: yes Feed speed: stepless from 2.5 - 13 m/min Control: touch-screen Electr./pneumatic belt oscillation: yes Infeed height: fixed (top section adjustable) Table display: digital Working height/table height: 900 mm Motor power: 36 kW Location: Supplier

Stav: použitý, Rok výroby: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Round tank glue application unit Dsdpfeyqanbsx Agtjch - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for end cap/crosscut trimming - Top/bottom milling units: 2 milling units with tracing rollers for radius or chamfer - Radius scraper: pneumatically controlled, for finishing radii - Surface scraper: for smoothing of edge surfaces - Polishing unit: 2 polishing discs with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply: 3x 400 V AC, 50 Hz - Rated power: 12.7 kW - Rated current: 30.5 A - Control voltage: 24 V DC - Max. fuse: 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short-term Location: Röllbach

Stav: použitý, Rok výroby: 2003, Použitý stroj Rok výroby: 2003 Výbava a technické údaje: - Riadenie MAGELIS Dcjdpsxymfwsfx Agteh - Pre tavné lepidlo na báze EVA - Lepenie: 2x1,5 kW, u=12000, 200 Hz - Orezávanie: 2x0,2 kW, automat. natáčanie 0°/3°, 2 HM pílové kotúče 140 mm - Zrovnávacie frézovanie: 2,07 kW, s WPL hlavami HF 70, priemer 70 mm - Frézovanie rádiusu: R2 - Tiahací nôž pre rádius - Plošný tiahací nôž - Horná zásobník lepidla - Rozmery obrobku: - Minimálna šírka: 70 mm - Hrúbka: 8-42 mm - Minimálna dĺžka: 150 mm - Hrúbka hrany: 0,2-6 mm - Posuv: 12 m/min - Prípojka odsávania: 160 mm Rozmery: 4 500 x 1 250 x 1 300 mm Hmotnosť: 1 650 kg Dostupnosť: ihneď Sklad: Bádensko-Württembersko

Stav: nový, Premilling unit, kW Dimensions (Length/Width/Height), mm Approx. machine weight, kg Masterwood MasterSaw Heavy-duty pressure beam saw with full equipment Manufacturer description: The MasterSaw pressure beam saws feature the following equipment: - Air-blown cutting line - Height-controlled pressure beam - Controlled saw blade projection - 3 or 4 air cushion tables, central tables adjustable - Infeed and outfeed rollers at the end of the tables Dedpfx Agoxmk Ebotsch - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the operator panel - Masterlock quick-change system for saw blade replacement - Saw carriage return travel 110 m/min, feed up to 95 m/min - Pusher return travel up to 95 m/min - Machine weight 6 t or 6.8 t - 8 or 10 dual-finger grippers as standard - Dual roller side aligner - Intuitive machine software with graphical operator guidance - Anti-stress cut - Recutting option (nesting) - Front and rear cleaning flap Equipment features MasterSaw series: MasterSaw 320 – Outstanding in price-performance - Cutting length 3,200 mm - 3 air cushion tables, central table adjustable - 6 t machine weight MasterSaw 430 – Industry standard for crafts - Cutting length 4,300 mm - 4 air cushion tables, central tables adjustable - 6.8 t machine weight Detailed equipment features MasterSaw 320/430: - Saw unit with automatic adjustment of optimal saw blade projection - Scoring saw unit with 200 mm blade for chip-free saw cuts at high feed speeds - Saw unit drive by servomotor and rack and pinion - Pneumatic pressure beam always positioned parallel to the work table via rack and pinion - Opening height of the pressure beam monitored by intelligent control to achieve the shortest cutting cycles - Dual roller side aligner positions the panel strips before and after the cutting line - Material pusher with 8 (MS 320) or 10 (MS 430) dual-finger grippers Technical data MasterSaw 320/430: - Max. panel size MS 320: 3,200 x 3,100 mm - Max. panel size MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thickness up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode, up to 110 m/min in return mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320), 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE protective device Equipment features MasterSaw series: MasterSaw 430 L – Lift table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features rear feed via lift table. Thanks to the 120 mm cutting height, it is also ideal for series production. Equipment and technical data MasterSa...

Stav: použitý, Rok výroby: 2007, číslo stroja/vozidla: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Použitý stroj GM020.0068 AKV 3003 DK - F Rok výroby: 2007 Prevedenie: 3 mm 1. frézovacia stanica: Kombinovaná Dsdpfx Agow Nih Ijtech Povrchový ťahací škrabák s výkopom Podvozok Pneumatické nastavovanie frézovania Páka koncového spínača, sklon 7,5°