Stroj na valcovanie závitov

PEE-WEE P 10

Stav: použitý, Rok výroby: 2006, x-axis travel: 600 mm y-axis travel: 400 mm z-axis travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Maximum table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm Ijdpjv Az Ucofx Agtstb T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Maximum torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse x/y/z: 20,000 mm/min Feed rate: 1 - 20,000 mm/min Incremental feed rate: 15 steps / 0 - 1,260 mm/min Number of tool magazine positions: 40 Maximum tool width: 80 mm Maximum tool diameter with adjacent pockets empty: 125 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space required approx.: 2.8 x 3.0 x 2.9 m Vertical Machining Center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Stav: použitý, Rok výroby: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Machine weight approx.: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B axis: 0°-130°, freely programmable Bar capacity: Ø 3 mm up to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear carriers: 2 units Total tool capacity: 35 positions Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Ijdovivx Nopfx Agtjtb Weight: 3,300 kg Convertible from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Rok výroby: 2002, Stav: veľmi dobrý (použitý),

Stav: nový, High-performance tapping machine with leadscrew and optimal safety device to prevent tool breakage. Programmable for single-cycle or continuous operation. Electronically controlled motor braking in single-cycle mode. Simple leadscrew change via quick coupling. Technical specifications UNIMAX 3T GL: Tapping capacity: M4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Isdpfx Asgv I Unogtjtb Drilling depth: 120 mm Throat: 260 mm Spindle/table distance: 220 - 600 mm Table size: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, rapid return disengagement, external ventilated motor, die holder, flanged quill, foot pulse switch, two-hand start, LED machine lamp, minimum quantity lubrication system, base cabinet

Stav: použitý, Rok výroby: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse rate: 30 m/min Ball screw diameter: 25 mm Tool holder Slide 1: Number of tools, fixed with 16 x 16 mm tool shank: 5 pcs Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse rate: 30 m/min Ball screw diameter: 30 mm Tool holder Slide 2: Number of stations on turret with integrated spindle: 8 pcs Number of axially-driven tools (integrated): 8 pcs Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2,460 x 1,510 x 1,750 mm Isdetzyx Tjpfx Agtetb Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar feeder magazine - 5-position tool plate for Slide 1 - Electrical interface and software for bar loader magazine - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle workpiece ejector

Stav: použitý, CNC sústruh s Y-osou a protivretenom Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Výkon hlavného vretena 15 kW Samosvorný priemer 175 mm ASA 5 Upnutie vretena Priemer tyče 52 mm Sústružnícky priemer 230 mm Dĺžka sústruženia 500 mm Počet otáčok 5000 Počet revolverových hláv držiakov nástrojov: 1 Počet pozícií v prvom revolveri: 12 Počet poháňaných staníc v prvom revolveri: 12 Typ uchytenia nástroja v prvom revolveri: VDI 30 Os X, pojazd 160 mm Pojazd Y osi ±32 mm Pojazd Z osi 550 mm Rýchloposuv osi X, Y, Z: 30 m/min Protivreteno áno Príruba vretena ASA 5 Počet otáčok protivretena 5000 Výkon protivretena 9 kW Priemer priechodu vretena 30 mm Typ a značka podávača tyčí: LNS s jednoduchou tyčovou trubicou Pásový dopravník triesok Prednastavenie áno Rok výroby: 2000 Stroj sa nachádza v našom sklade v Gussago BS, zapojený pod prúdom. Mimu obrábacie stroje Taliansko Ijdpfjqn E U Tsx Agtjtb

Stav: použitý, Rok výroby: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight: approx. 23.6 t Ijderw Dknepfx Agtstb Floor space required: approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description: X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT50, Drive power: 22/26 kW, Grid size: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Extended central lubrication (2005), Axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion: 128 Kbytes, Tool correction memory (200 positions), High-Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure through-spindle coolant supply, 20 bar, and zero-point clamping system with 16 pots each.

Stav: použitý, Rok výroby: 2011, Rod diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Iedpfx Agjw Ed Tfetjtb Pick-up station: 32 Subspindle turning length: 150 mm Subspindle speed: 8,000 rpm Subspindle C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 axes in total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB bar feeder CNC Swiss-type lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar loader Very good condition! Main spindle motor and bearings are new. Delivered complete with all accessories, clamping devices, manuals.

Stav: dobrý (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný,

Stav: generálne opravený (použitý), Rok výroby: 1988,