Laserový rezací stroj

Prima Power CV 5000

Laser Machine
Prima Power CV 5000
Year of manufacture: 2016

3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000)

Average power output:
200 W – 5000 W

Peak power:
Up to 6 kW

Wavelength:
10.6 micrometers

Beam quality factor (M²):
< 2.4 (typically 2.1 to 2.3)

Beam divergence:
1.5 mrad (half-angle)

Beam diameter at output:
15 mm 1/e², 21 mm full beam

Pulsed mode – Pulse repetition rate:
0 – 2 kHz

Pulse duration:

250 microseconds, 70 µs resolution

Alignment stability:
+/- 150 µrad

Operating conditions:
• Max. ambient temperature: 40 °C
• Min. ambient temperature: 10 °C
• Relative humidity: < 95 % (non-condensing)

Diode laser:
• Wavelength: 635 nm
• Output power: < 1 mW

———

3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000)

Electrical:
• Power consumption: 37 kW
• Voltage: 400 VAC – 460 VAC ±10%, 3-phase

Cooling:
• Required cooling capacity: 45 kW
• Flow rate: 133 L/min (35 GPM)
• Inlet temperature: 18 – 20 °C
• Maximum inlet pressure: 6 bar
• Nominal inlet pressure: 3 bar
• Differential pressure: 1.5 bar
• Coolant: Distilled water with 35% Dowfrost HD
• Filtration requirement: 100 micron
Ijdpfx Ajywwrfofzsat

Gas:
• Type / Purity / Gas blend / Consumption:
• He: 99.996% | 67.7% | 13.4 – 46.8 SLPH
• CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH
• N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH
• Total consumption: 20 – 70 SLPH (variable)

Other requirements:
• < 10 ppm water vapor, hydrocarbons, and oxygen
• Air: dry – dew point < 2 °C
• Dependent on shutter operating cycles

Inzerát bol automaticky preložený. Chyby v preklade sú možné.