PROIN ATHADER Priečna strihacia linka 650x2.5 CTL

PROIN ATHADER CTL 650x2.5

Stav: veľmi dobrý (použitý), Rok výroby: 1980, Šírka pásu: 1 500 mm Hrúbka pásu: 0,6 – 3 mm Hmotnosť zvitku: 10 t Giedpsqw Akmjfx Anqju

Stav: veľmi dobrý (použitý), Šírka pásu: 6 – 200 mm Hrúbka pásu: 6 – 0,5 mm Rýchlosť: max. 100 m/min Smer pracovného pohybu: ľubovoľný Priemer pracovného valca: 250 mm Dĺžka segmentu (balíka): 250 mm Jadro valca pre montáž prstencov: 190 mm Gijdpfxjp E Ed Ro Anqeu

Rok výroby: 1989, stav: dobrý (použitý), Šírka pásu: max. 1 840 mm Hrúbka pásu: 0,3 – 3 mm Gsdpfx Anjg Iih Nsqsiu Priemer nožových hriadeľov: 224 mm Priemer nožov: 350 mm

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including a new, modern and future-proof control system. New servo motors for the X-axis and for the workpiece spindle head. The photo shows a previously delivered machine in the UR specification. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control, so no additional familiarisation is required. - Diagnostic function with PLC message display and digital I/O - Dressing function can be extended or modified as per customer requirements. - Workpiece spindle can be equipped with oriented stop on request. - New maximum infeed rate: 40 mm, can be further increased upon request. - Digital readout on 2 axes. X-axis resolution: 0.5 μm. Options: - Encoder with digital display on the workpiece spindle head - Encoder with digital display on the grinding spindle head (no spindle height adjustment possible) - New, robust internal grinding device, ø 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Grinding spindle speed control Gjdpfsuwv Idsx Anqeiu Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system in the X-axis, driven by stepper motor. Hydraulic table longitudinal and rapid traverse movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup on individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control Please note: At the current time, this machine does not meet the fundamental safety and protection requirements set out in the German Industrial Safety Regulation (BetrSichV 2015). Determination of the required minimum protection targets must be carried out via a risk assessment in accordance with BetrSichV.

Rok výroby: 1980, stav: dobrý (použitý), Šírka pásu: max. 1 650 mm Hrúbka pásu: max. 3 mm Priemer nožových hriadeľov: 165 mm Rýchlosť: max. 150 m/min Godpfx Ajd Ha Hmsnqeiu

Rok výroby: 1985, stav: veľmi dobrý (použitý), Šírka pásu: 10 - 350 mm Hrúbka pásu: 0,2 - 2 mm Počet strihov/hrúbka pásu: 25/0,5 mm Godolilgcopfx Anqoiu Hmotnosť cievky: max. 1 t

Stav: použitý, Strip Processing Line – Decoiler and Straightening Machine Gedpfx Anoif Sg Sjqjiu Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Premium equipment and feeding aids Space requirement for complete system (L x W): approx. 7,000 x 3,000 mm Weight of complete system: approx. 11 tons Condition: Good Straightening Machine HMS Type RS 47-04/1, Serial No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min. Number of straightening rollers: 7 pieces Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pieces Pinch roller diameter: Ø 80 mm Entry/Throughput height: 1,500 mm - Straightening rollers hardened, ground, and hard chrome-plated, with central support - Pinch rollers hardened, ground, and hard chrome-plated, with hydraulic ventilation - Manual roller gap adjustment - Feeding aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable lateral strip guide - All straightening rollers driven via distributor gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via gear motors - Straightener opening lift 250 mm for cleaning or for processing thicker material, lifting movement via trapezoidal screw spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Serial No. Coil weight: max. 8,000 kg Outer coil diameter: max. 1,600 mm (with loading carriage) Outer coil diameter: max. 2,000 mm (without loading carriage) Turntable diameter: Ø 1,700 mm Coil inside diameter, clamping range: 460–520 mm Coil width, nominal: max. 630 mm Spreader segment width: 750 mm Height of decoiler head above floor plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head, type TWINFLEX - Hydraulic expansion of decoiler head, central via wedge-slide system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lift capacity and 300 mm stroke - Decoiler on elevated base frame with motor-driven cross-travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic power unit, adjacent Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Switchgear cabinet, adjacent - All cable connections with Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Rok výroby: 1985, stav: veľmi dobrý (použitý), šírka pásu: 10 – 350 mm Godpfx Anslilfboqeiu hrúbka pásu: 0,2 – 2 mm počet rezov / hrúbka pásu: 25 / 0,5 mm hmotnosť zvitku: max. 1 t

Rok výroby: 1999, stav: dobrý (použitý), Šírka plechu: 500 – 1 600 mm Dĺžka plechu: max. 4 500 mm Hmotnosť stohu: max. 3 t Godpebh Dtwjfx Anqsiu Výška stohu (s paletou): max. 500 mm Rýchlosť: max. 40 m/min.

Stav: použitý, Šírka zvitku: 12″–60″ Hrúbka materiálu: 0,015″–0,135″ Vnútorný priemer zvitku: 20″–24″ Rýchlosť: 180 fpm (stôp za minútu) Smer: zľava doprava Vstupný podlahový vozík na zvitky Mandrelový odvíjač so silovým rozpínaním Motoricky poháňaný prítlačný valec Podávacie pohony Hydraulický odlučovač pásu (peeler) 9-valcová rovnacia jednotka so 4″ pracovnými valcami Poháňané vstupné pridržiavacie valce Motor 40 HP Nastaviteľný hrbovitý stôl Mechanické nožnice Pásový dopravník s dorazovým zariadením Vzduchom ovládaný zakladač tabúľ plechu s dvoma sekciami gravitačných valcov Gjdpfx Aeihf Tponqeiu