Laserový taviaci systém

Renishaw RenAM 500 S-FLEX

Processable materials: Metals in powder form. This includes, for example, stainless steels and tool steels, aluminium alloys, nickel-based alloys, and titanium alloys. For further information regarding materials and surface finish, please refer to our homepage.

Net weight: 1,870 kg
Laser type: Ytterbium fiber
Laser power: 1 × 500 W
Dimensions: 2,165 mm × 1,236 mm × 2,130 mm (L × W × H)
Build chamber (1): 250 mm × 250 mm × 350 mm (L × W × H)
Powder layer thickness: 20 µm to 120 µm
Typical processing speed (3): 2 m/s (max. 10 m/s)
Build rate (2): Up to 254 cm³/h
Beam focus diameter: 80 µm with dynamic focus
Dynamic focus diameter: Up to 500 µm
Beam wavelength: 1,070 nm to 1,080 nm
Maximum laser modulation frequency: 20 kHz
Chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content)
Consumption during filling/emptying of the system: < 1,200 l
Maximum argon consumption (during filling): 400 l/min
Hjdpfx Aev Ewpnjgusnu
Continuous argon consumption (after initial filling): < 0.8 l/min
Operating pressure in chamber: 10 mbar to 20 mbar
Argon gas supply connection: 3/8 in BSP plug-in connector
Argon quality: 20 ppm permissible impurity or better (purity level of 99.998%)
Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase
Data connections (5): Standard RJ45 network connection. Renishaw recommends the use of Cat 6 power class network cables.
Ideal operating temperature (7): 18 °C to 22 °C (min./max.: 15 °C to 28 °C)
Ideal relative humidity (7): < 60% (max. < 80%)
Clearance below the machine (without plinth): 146 mm
Optical module protection rating: IP5X
Noise level: ≤ 70 dB
Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software

(1) Build chamber refers to the maximum wall-to-wall build envelope; the usable area is typically smaller. The substrate plate is not included in the given dimensions.
(2) The maximum build rate does not include recoating time and is subject to parameters, component geometry, and material.
(3) Typical processing speed depends on parameters, component geometry, and material.
(4) The calculated maximum load for the machine is 50 A, rated operating current is 32 A.
(5) The user has the option to configure the network with their own control software. For further details, see the user manual for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3693.
(6) Due to differing electrical requirements in various countries, the part numbers for the additional equipment may vary. Please contact your local customer service for further details.
(7) Temperature and humidity must not simultaneously be at their respective maximum values and must remain below the value at which the dew point reaches 16°C (61°F), in order to avoid condensation forming on the laser components. Refer to the site preparation and installation guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.