Pracovné centrum pre okenné rámy

SAOMAD

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW Fjdpfx Ajvu Hghofmepb > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Angle machining center Weinig Unicontrol 10 (UC 10) for the production of windows, elements, and doors. Suitable for frame-by-frame, series, or single-part manufacturing, equipped with 2 tenoning and mortising spindles including Oertli tool set. - Units/aggregates: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Double component package - Counter-milling package with counter-milling carriage - Automatic turning system - PC control NEXUS - CNC-controlled length stop - Studio window setup - Edge rounding unit from below with cross-cut saw - Bar support rail - Incl. extraction pipe system Fsdpfxjv Ag Tds Afmopb - Incl. Oertli tool set - Further technical data and tool drawings available on request.

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, Plne funkčný UniControl 12, rok výroby 2006, z Nórska. - Presné technické špecifikácie nájdete v priloženom PDF dokumente. Priečna sekcia UniTec 12: - Pílová jednotka - Okrúhlovací frézovací agregát zospodu - Vertikálne vreteno č.1 - Vertikálne vreteno č.2 - Vertikálne vreteno č.3 Dlhá, profilová sekcia UniVar 12: - Profilová fréza - Profilová fréza - Profilová fréza horizontálna - Profilová fréza - Profilová fréza - Profilová fréza Celkový elektrický príkon 114 kW, 400 V AC Požiadavka na odsávanie 270 m³/min Potrebný stlačený vzduch 1000 l/min Stroj bol v prevádzke do 15.08.2023 Platba: pred nakládkou Dodanie: EXW z výroby Rendalen – Nórsko Fjdpfxsmgc I Nj Afmopb Stroj sa nachádza v Nórsku (pri meste Trondheim) Stroj je momentálne odpojený, uskladnený v suchom a teplom sklade a je pripravený na expedíciu. Rekman Maskin & Service – servis drevoobrábacích strojov od roku 1986.

Rok výroby: 1977, Stav: generálne opravený (použitý), Predávam dvojitú pokosovú pílu Rapid DGS, rok výroby 1977. Otočné hlavy. Vŕtacie hlavy vpredu na každej strane vrátane. Vo veľmi dobrom stave. K dispozícii ihneď. Fedpfx Asd N Rb Defmepb

Stav: dobrý (použitý), Rok výroby: 2019, Weinig Conturex Greenline Plus CNC stroj na výrobu okien Popis: Rok výroby: 2019 Spracovateľná dĺžka obrobku: 4500 mm Automatická kontrola dielov na vstupe Nastavenie upínadiel v spojení s polodrážkovými svorkami Hlavný motor 30 kW nepriamo poháňaný Unispindle pre čapovanie, vŕtanie a špeciálne obrábanie Menovacia jednotka so 35 a 17 pozíciami pre nástroje Držiak nástrojov HSK 63F Špeciálny softvér na registráciu údajov zo stroja a firemných údajov Dĺžka vstupného/výstupného zásobníka: 2000/2500 mm Voliteľná sada nástrojov/plán k dispozícii Kompletný popis na požiadanie (Napriek našej veľkej starostlivosti sú všetky zmeny, chyby v technických údajoch, cenách a všetkých informáciách vyhradené chyby v písaní. Žiadna záruka na vytlačené údaje! Dostupnosť závislá od predchádzajúceho predaja). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Ceny bez inzertných nákladov MachineSeeker / Ceny bez inzertných nákladov MaschinenSucher Najlepšie drevoobrábacie stroje z Holandska Fsdpfx Afew N Nixomspb Najlepšie holzbearbeitsmaschinen z Holandska Najlepšie použité stroje z Holandska

Stav: veľmi dobrý (použitý), SCM Multiflex – centrum kątowe do jednostronnej obróbki poprzecznej i wzdłużnej naroży okien i drzwi Wrzeciono czopujące o długości 320 mm, maksymalny zakres roboczy 320 mm System posuwu z rolkami Wrzeciono profilujące o długości 320 mm, maksymalny zakres roboczy Fsdpfxewmcnws Afmepb

Stav: použitý, Working width: 4000 mm Working height: 2600 mm Number of pressing cylinders: 6 pcs Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE Version Robust frame-welded construction made of thick-walled special hollow profiles. Sliding carriages and pressure beams with 50 mm hole matrix. Continuous left-side support for width pressing, lower support at two levels. Vertical pressing cylinders mounted on special pressure beams, one-hand quick adjustment with weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing guided carriage with central locking, positioning in 50 mm increments. Upper horizontal pressing cylinder, continuously height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two supporting levels, with weight compensation. Support and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders, diameter 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment; 2 horizontal pressing cylinders, diameter 40 mm, stroke 120 mm, double-acting with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulator valve from 20 to 125 bar, corresponding to 400 to 2400 kg pressing force vertically, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painting: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirements: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Item ,00 pcs Central pressure beam with pressing cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Item ,00 pcs Individual pressure control for central pressure beam, pressure control range up to max. 100 bar (for pressing crossbar windows) Item ,00 pcs Cross-pressure device complete with pressing cylinder, double-acting, weight compensation, pressure hose and shut-off valve Weight compensation for lower horizontal cylinder omitted Item ,00 pcs Individual pressure control for cross-pressure device, pressure control range up to max. 100 bar (for pressing crossbar windows) Item ,00 pcs Shut-off valve on 3rd vertical cylinder Item ,00 pcs Shut-off valve on upper horizontal cylinder Item ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Item ,00 pcs Basic equipment for counter profiles (space requirement in height increases by 100 mm) Item All pressure plates and supports covered with plastic Item ,00 pcs Triangle studio window pressing device, consisting of locking device for vertical pressure beams and 3 attachable, side-guided pendulum pressure plates Fpodpfju Uvaljx Afmsb Item ,00 pcs Double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above specification ex works: On request! -----

Stav: veľmi dobrý (použitý), Hoblík 9 hlav Pracovná šírka: 20 cm Pracovná výška: 22 cm 5 posuvných valcov v stole Hlavy: 1 dole – 7,5 kW 2 vpravo – 11 kW 3 horná – 11 kW 4 vpravo – 11 kW 5 horná – 11 kW 6 dole – 11 kW 7 horná – 11 kW 8 dole – 11 kW Fpedstrdwtopfx Afmsb 9 univerzálna – 11 kW PERFEKTNÝ STAV!

Stav: použitý, Rok výroby: 2006, No. 3195 CNC Machining Center BIESSE Rover C 6.50 CONF.2 Used, year of manufacture: 2006 Machine already dismantled According to our customer, the machine is fully functional Multiple workpieces can be machined simultaneously on this machine Working area X: 4850/4600 mm Working area Y: 1535 mm Power rating: 228 kW, 39 A Required footprint: approx. 8100 x 6500 mm (L x W) Total weight: approx. 6800 kg Sale on behalf of customer, ex location Poland, without dismantling, transport, or installation Errors in description and price excepted Dismantling, loading, and transport by us available as an option To avoid possible misunderstandings, an on-site inspection by prior appointment is possible and recommended Sale as is Fodpevn R A Hefx Afmjpb Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Pictures and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works location

Rok výroby: 1998, Stav: veľmi dobrý (použitý), Predám súpravu na výrobu okien: 1 ks čapovacia a drážkovacia linka Weinig Unitec 10. 1 ks profilovací a falcovací automatické centrum Weinig Univar 10. Rok výroby 1998. Frézovacie hlavy OERTLI. K dispozícii ihneď. Fodpsfzzhyjfx Afmopb Cena spolu 17.000 eur. Stav veľmi dobrý!