Schütte SF26S DNT

Schütte SF26S DNT

Stav: použitý, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 – 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 – 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 – 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 stages: 1.5 – 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange centre tip angle: 70° Carriages Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 – 300 mm/min Infinitely variable feeds, cross: 0.3 – 120 mm/min Maximum cutting force at carriage: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange centre tip angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first carriage - Copying length: 8500 mm - Max. copying depth in a single pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 – 1000 mm - Max. boring depth in a single pass: 2700 mm At Ks of 200 kp/mm² – max. s = 1.5 mm/rev Godpfx Aexddvnoftoil a = max. chip cross-section 30 mm² at overhang of 1000 mm Chip cross-section decreases with increasing boring depth A taper turning attachment with setting angle up to 8° and max. taper length (in one pass) of 2000 mm, setting accuracy ± 5 minutes. A taper turning attachment with setting angle up to 15° and max. taper length (in one pass) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on spindle head.

Stav: dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, MITUTOYO Contracer CV-2100M4 Kontúrmérő gép Mérési tartomány vízszintesen (X): 100 mm Mérési tartomány függőlegesen (Z): 50 mm Oszlop elmozdulási tartománya (Z2): 350 mm Dőlés: +/- 45° Méretek (SzéxMéxMa): 745 mm x 450 mm x 885 mm Teljes tömeg: kb. 150 kg Tartalmazza: PC-rendszer Tartalmazza: 218-001 kereszttáblát Giodpfxevun Tpo Aftsl Tartalmazza: 2028-003 forgatható satu

Stav: takmer ako nový (použitý), Rok výroby: 2022, prevádzkové hodiny: 13 116 h, Max. bar capacity mm: 20 Max. Z-axis travel, sliding/fixed head mm: 1) 205 / 80 Max. spindle speed rpm: 10,000 Drive power at 100%/40% duty cycle kW: 3.0 / 5.5 Torque at 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations (top turret): 8 Driven tool stations (top turret): 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder ø mm: 45 Drive power at 100%/40% duty cycle (tools) kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tool stations: 8 Max. tool speed rpm: 12,000 Tool holder ø mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working station: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder ø mm: 25 Sub-spindle: Max. spindle bore mm: 20 Max. speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant System (Basic Unit): Pump pressure bar: 3 / 8 Tank capacity l: 250 Delivery rate at 3 / 8 bar l/min: 80 / 120 Filtration fineness µm: 200 Machine dimensions: Length x width x height mm: see layout plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA) Gisdpfx Aowuddvoftel

Stav: použitý, Rok výroby: 1988, prevádzkové hodiny: 30 000 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 20992, Vážený pán / Vážená pani, máme pre Vás možnosť ponúknuť vákuovú pec IPSEN VTTC-324 z roku 1988. Charakteristika vákuovej pece: Sn = 165 kVA Un = 400 V, 50 Hz In = 240 A Využiteľné rozmery: 450 mm x 600 mm x 900 mm Výkon ohrievačov = 120 kW Napätie ohrievačov = 43 V, 50 Hz Prúd ohrievačov = 1613 A Teplotný rozsah = 350 - 1320°C Giedpewah R Rsfx Aftsl Absolútne vákuum = 1 x 10^-5 (difúzna výveva) Absolútny tlak = 5 bar Súčasťou pece je aj veľké množstvo náhradných dielov a príslušenstva na tepelné spracovanie (zásobník na plyn, ohrievače, množstvo regulátorov, nabíjačky a ďalšie príslušenstvo). V prípade záujmu alebo akýchkoľvek otázok ma prosím kontaktujte.

Stav: dobrý (použitý), Rok výroby: 2004, Comm. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 operator panel - Oil circulation lubrication Technical Data Pressing force max.: 500 kN Strokes per minute: 30 to 900 min⁻¹ Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Upright gap: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roll feeder VAMCO SP 150 Year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm Gsdsip Uqmopfx Aftoil

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, výška stredu: 150 mm, šírka v strede: 630 mm, otvor vretena: 40 mm, maximálna rýchlosť vretena: 3 000 ot./min, otáčky vretena (min.): 14 ot./min, celková hmotnosť: 1 500 kg, Výbava: otáčky plynule nastaviteľné, Schaublin 150A Sústruh Špecifikácia Výrobca: Schaublin Typ: 150 Rok výroby: Neznámy Ovládanie: konvenčné Max. priemer sústruženia: 340 mm Vzdialenosť medzi hrotmi: 630 mm Hlavné vreteno Otáčky: 14 až 3000 ot./min Uchytenie: Camlock D1-4" Gijdpox Ddamsfx Aftol Upínanie klieštiny: Schaublin B32 Extra Multifix B plus 5 držiakov nástrojov 3- a 4-čeľusťové skľučovadlo Koníček Sada upínacích klieštin B32 Chladiace zariadenie Heidenhain DRO (ND780, 3 osi) Strojové svetlo Redukčná prevodovka Rýchloupínacie zariadenie atď.

Stav: veľmi dobrý (použitý), Rok výroby: 1999, dĺžka brúsenia: 1 000 mm, Vnútorné / vonkajšie vreteno Upínacie zariadenie Schaublin s vložkami Opierka 5 - 80 mm Opierka 3 - 120 mm Chladiaci systém Filtračný systém Otáčky hlavy: 1500 / 1700 / 2200 Výška stredu: 175 mm Brúsny priemer Ø: 350 mm Dĺžka brúsenia: 1000 mm Rozmer brúsneho kotúča: 400 x 50 x 127 mm Otáčky brúsneho kotúča: 1500 / 1700 / 2200 ot./min. Otočný stôl: 9° Koník: 4Mk Chladiace zariadenie: Áno Gedpfx Afexy I Tveteil Filter: Áno Dĺžka: 2860 mm Šírka: 1680 mm Výška: 1670 mm Hmotnosť: 2500 kg

Stav: použitý, Rok výroby: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Gijdpfxsvivx Ne Aftjl Control: FANUC 31i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Machine weight approx.: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B axis: 0°-130°, freely programmable Bar capacity: Ø 3 mm up to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear carriers: 2 units Total tool capacity: 35 positions Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Stav: ako nová (výstavný stroj), Rok výroby: 2017, prevádzkové hodiny: 132 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 20731, pojazdová vzdialenosť osi X: 500 mm, zdvih osi Y: 350 mm, zdvih osi Z: 300 mm, rýchloposuv os X: 90 m/min, rýchly posuv osi Y: 90 m/min, rýchloposuv osi Z: 90 m/min, menovitý (zdanlivý) výkon: 35 kVA, výrobca ovládačov: Fanuc 31I, maximálna rýchlosť vretena: 42 000 ot./min, prevádzkové hodiny vretena: 132 h, prívod chladiacej kvapaliny: 20 lišta, výkon motora vretena: 15 W, nos vretienka: HSK E40, vstupné napätie: 415 V, typ vstupného prúdu: trojfázový, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, Stroj je vo vynikajúcom stave. Presnosť obrábania je +/-0,0015 mm (merané prístrojom Zeiss Micura). Stroj je vybavený sondami Renishaw OMP400 a BLUM Pico na meranie obrobkov a nástrojov. Opakovateľná presnosť je +/-0,001 mm. Stroj má vysoko-rýchlostnú a vysoko-presnú opciu na riadiacom systéme Fanuc. Možnosť predvedenia v chode pod napätím. Gsdpfjvcfi Dox Aftoil

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Gisdjuxfucspfx Aftjl Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula