SCM ACCORD 20

SCM ACCORD 20

Stav: vyžaduje opravu (použité), Rok výroby: 2014, číslo stroja/vozidla: AA2/002546, počet pozícií v zásobníku nástrojov: 24, celková hmotnosť: 6 600 kg, dĺžka stola: 5 200 mm, šírka stola: 1 300 mm, TECHNICKÉ ÚDAJE Dĺžka stola: 5.200 mm Šírka stola: 1.300 mm Počet frézovacích vreten: 1 Typ frézovacieho stola: nosníkový stôl Pozície meniča nástrojov: 24 DETAILY STROJA Dusdjy Nybtjpfx Alyst Napätie: 400 V Prúdová spotreba: 64 A Rozmery & Hmotnosť Rozmery (d x š x v): 10.300 x 2.450 x 2.800 mm Hmotnosť bez nákladu: 6.600 kg Prepravné balíky: 1 VYBAVENIE Vrtacie nástroje Vákuová pumpa Nástroje Vákuová pumpa Becker Vtlf 250: - Rok výroby: 2008 - Výkon hlavného motora: 5,5 kW - Priemer pripojenia: 70 mm - Bezolejová: Áno Poznámka: Stroj je potrebné opraviť. Je problém so systémom CAN-Bus.

Stav: dobrý (použitý), Rok výroby: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Centralized lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. Dujdpfxjx E Ahze Alyot 4-axis CNC machining center (X/Y/Z + tilting/rotary axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation / tilting): Freely programmable angle, -90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system with PC operation, color display, USB & network connectivity. Software: eluCam. Automatic material clamps, automatic positioning via indexing pins Pendulum/shuttle operation (two working zones), which improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining — all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Stav: použitý, číslo stroja/vozidla: 008356, Pracovný rozsah os X: 3650 mm Duodpfx Aox Swf Islyet Pracovný rozsah os Y: 1560 mm Pracovná plocha: nestovací stôl Výkon hlavného vretena: 13 kW Počet riadených osí: 4 osi Počet vŕtacích vretien: 18 Počet miest na nástroje: 26

Stav: použitý, Rok výroby: 2003, Priemer sústruženia: 190 mm Dĺžka sústruženia: 620 mm Ovládanie: Fanuc Series 18i-TB Celkový príkon: 15 kW Hmotnosť stroja: cca 13,5 t Priestorové nároky (DxŠxV): cca 5350 x 3350 x 2395 mm CNC sústružno-frézovacie centrum NAKAMURA TOME Super NTJ Rok výroby: 2003 Ovládanie: Fanuc Series 18i-TB - Hlavné vreteno je potrebné zrepasovať. - Horný revolver dodatočne vybavený vzduchom poháňaným vretenom G42 Turbo s 60 000 ot./min a riadiacou jednotkou GTR 3. Počet osí: 9 Počet revolverov: 2 Max. priemer sústruženia: 190 mm Max. dĺžka sústruženia: 620 mm Priechod cez puzdro: do 65 mm Dusdpsxiy Ausfx Alyet Max. obehový priemer nad lôžkom: 190 mm Počet vreten: 2 (hlavné a protivreteno) Upínacia hlava: A2-6 Výkon pohonu: 15 kW Max. otáčky: 60 000 ot./min Os X: 345 mm Os Y: +/- 45 mm Os Z: 1240 mm Os B: +/- 91° horná, plne servomotorická s presnosťou 0,001° Priechod cez puzdro: D 65 mm - 12-násobný revolver pre poháňané nástroje - 24-násobný revolver pre sústružnícke nástroje (dvojitý držiak) - s množstvom príslušenstva - 2 x skľučovadlo Hainbuch HB

Stav: použitý, Rok výroby: 2011, Base machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced over the entire machine bed with welded-in components, making it extremely rigid. The table design used, with a large base, is the key to ensuring long-term precision and stability. The machine layout allows the user an optimal workflow with minimal space requirements. The mobile gantry is constructed as a solid monoblock. It is positioned in the X-direction on prismatic, ground rails via recirculating ball-bearing carriages. On this mobile unit carrier, the working unit is again mounted on prismatic, ground guides and ball-bearing carriages. AXIS MOVEMENT All axis displacement is carried out on prism linear guides with large cross-sections and recirculating ball carriages with a large contact surface, guaranteeing optimal movement even at the highest speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via a helical pinion and rack system. Recirculating ball screws with a large cross-section ensure accurate positioning of the working unit along the moving gantry (Y- and Z-axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumpers and light barrier 1 Bumpers with sensors are installed around the movable gantry, and a light barrier system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower value of 25 m/min without stopping the machine. The system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions found in pressure mat systems. This prevents unwanted interruptions to the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard 1 Side and rear protective fencing Automatic central lubrication system regulated via CNC controller 1 Lubrication of the X, Y, and Z axes is regulated via the CNC controller at regular intervals without manual intervention on the machine. Central extraction nozzle 1 All individual extraction nozzles of the machining units are combined into one central nozzle. Within the nozzle, various slide valves are controlled via the NC controller. This reduces the required extraction airflow. Chip conveyor 1 Maxi - 5-axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle delivering 11 kW at 20,000 rpm (S1, 100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F 18 kW inverter for stepless, uniform power delivery Max. rotation: B-axis = 200° (+/- 100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to execute complex horizontal positioning in a small workspace. This allows the machining of complex geometries without the risk of collision. Duedpfoxy Tmnsx Alyet

Stav: použitý, Rok výroby: 2011, Veľkosť obrábania v smere X: 2770 mm Veľkosť obrábania v smere Y: 1220 mm Hrúbka obrábania (rozmer Z): 80 mm Konštrukcia stroja: portálový stroj Výkon hlavného vretena: 11,0 kW Otáčky hlavného vretena: 1500 - 24 000 ot/min Vektorovo riadené vreteno: Áno Upínací systém: HSK 63 F Chladenie vretena: vzduchové chladenie Dodpfxjvvi Hte Alyout Počet osí: 3 Menic nástrojov: áno, ks Počet miest pre výmenu nástrojov: 10 ks Písací strojová klávesnica: áno Myš: áno Programový systém: Xilog Plus DXF rozhranie: áno Možnosť online pripojenia: áno CD-ROM mechanika: áno Typ stola: rasterový stôl Upínací systém: upínacie valce Počet vákuových púmp: 1 Výkon vákuovej pumpy: 250 m³/h Zabezpečenie: bezpečnostné nášľapné rohože Skladové miesto: Sonnefeld

Stav: použitý, Rok výroby: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control: FANUC Total power requirement: 12 kW Machine weight approx.: 2300 kg Required space approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 _____ Working area: Longitudinal stroke X-axis: 500 mm Vertical stroke Z-axis: 300 mm Cross stroke Y-axis: 380 mm Table size / Working surface: 650 x 380 mm Max. table load: approx. 200 kg Distance table/spindle: 240-540 mm Spindle nose to column: approx. 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse(max.): up to 1,000-4,000 mm/min / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 2,300 kg Djdpfet Hw H Eex Alyout Accessories / Special features: • Original FANUC control with monitor and all modern subroutines, fault diagnosis, electronic handwheel, RS 232, easy and quick programming directly at the machine, among others • Vertical turret head with 10 tool stations ISO 40, fast chip-to-chip changeover approx. 7 seconds • Powered rotary table mounted on the bed (not a CNC axis), ideally suited as a rotary indexing table, hydraulic, type RST 2 • Separate standalone coolant unit • Various tool holders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminum Condition: good to very good – available for demonstration under power Delivery: immediately ex stock, loaded free on truck Payment: strictly net after receipt of invoice We look forward to your order. We always carry a wide selection of CNC machining centers of all types in stock – please ask for alternatives!

Stav: veľmi dobrý (použitý), Rok výroby: 2008, prevádzkové hodiny: 35 598 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 07400004031, výkon motora vretena: 20 W, otáčky vretena (min.): 3 250 ot./min, maximálna rýchlosť vretena: 5 000 ot./min, prechod tyče: 90 mm, celková hmotnosť: 10 000 kg, Kapacita tyče 90 mm – 2x 12polohová poháněná revolverová hlava – osa Y v horní revolverové hlavě – koník – řídicí systém Siemens 840D power line – stroj ve špičkovém stavu, vždy provozovaný s olejem – velmi, velmi dobře vybavený – podavač tyčí LNS Sprint S2. Dsdpsuyx Hzjfx Alyout

Stav: dobrý (použitý), BIESSE ARROW ATS 5-OSÉ CNC obrábacie centrum NC1000 Obrábacia hlava s revolverovým výmenníkom nástrojov Vŕtačka BH39, vákuová pumpa 250 m3 (stroj bol 10 rokov v prevádzke na drevárskej škole) Duodpfoukcy Eex Alyst

Stav: dobrý (použitý), Celková dĺžka vcelku: 3000 mm Dusdpfshwwfxjx Alyet Výška hrany: 90 x 90 mm